藏北羌塘盆地QK-1井中侏罗统烃源岩地球化学特征

QK-1天然气水合物钻探试验井位于西藏羌塘盆地毕洛错地区,主要钻遇中侏罗统夏里组粉砂质泥岩和布曲组灰岩。其有机质丰度、有机质类型、有机质成熟度等有机地球化学特征表明,南羌塘地区中侏罗统烃源岩的有机质丰度偏低,夏里组泥岩TOC介于0.26%~0.38%之间,达到差-中烃源岩标准,而布曲组灰岩TOC介于0.02%~0.08%之间,仅局部达到差烃源岩标准;两个组的烃源岩有机质类型主要为Ⅱ₂型及Ⅲ型,较利于天然气的生成,其中夏里组的生气能力优于布曲组;该区烃源岩热演化程度较高,Ro为1.31%~1.63%之间,均达到高成熟阶段,而夏里组有可能已进入干气阶段。基于冻土区天然气水合物成藏条件分析,综合考虑夏里组烃源岩及沉积厚度特征,认为中侏罗统夏里组具备良好的天然气水合物勘探前景。     

鄂尔多斯东缘地震重定位及拉张盆地过渡区的地震分布特征

利用双差地震定位方法对鄂尔多斯东缘地区（34°N-41°N,110°E-115°E）2008年1月-2012年12月的中小地震进行了重新定位.重定位后,定位精度得到改善,震中分布更加集中.鄂尔多斯东缘拉张盆地内部震源深度较浅,大多小于13 km,向盆地两端震源深度有加深的趋势,特别是太原盆地北端,临汾盆地北端,以及运城与临汾盆地之间的峨眉台地,震源深度可达20~25 km左右.我们认为盆地内部地壳减薄,上地幔上隆,热作用导致地壳内部脆性层减薄,致使最大震源深度变浅;盆地之间的横向隆起区受区域应力场挤压剪切作用以及盆地内部上地幔上拱产生的水平向挤压力作用等,在横向隆起区与盆地接触带易产生应力集中,导致地震的发生,由于受脆性层厚度变化等的影响,在盆地向横向隆起区过渡部位出现震源深度加深的现象.鄂尔多斯东北缘地区地震分布弥散、震源深度相对较浅,可能与源自地幔的大范围深部热作用以及地壳脆性层厚度减薄有关.根据地震的空间分布特征,对部分盆地内部的断层特征进行了讨论.     

基于相对质心震中的地震破裂方向性测定方法研究:以2008年云南盈江MS6.0地震为例

地震破裂方向性参数包含了断层几何形态、破裂长度等信息,对于地震灾害评估、孕震机理研究具有重要意义.但是基于点源近似的震源矩中心张量机制解(CMT)或断层面解(fault plane solution)只能给出两个节面,无法确定破裂断层面.本文提出一种基于质心与起始震中的差异确定发震断层的方法,该方法利用P波到时来测定主震与参考地震间相对起始震中,同时利用波形反演震源机制过程中的主震时移与参考地震时移之差测定相对质心震中,在假定单侧破裂的情形下,根据时移之差随方位角的变化推断破裂断层面.本文使用该方法研究了2008年云南盈江M_S6.0走滑型地震,发现其破裂方向与其他方法结果一致.由于该方法基于相对起始震中和质心震中,可有效削弱速度结构模型不准确以及地震绝对位置误差带来的影响,应可适用于其他类似类型6级左右地震的破裂方向性研究,但仍需进一步工作对其进行验证.     

2014年盈江双震的破裂历史

2014年5月24日在云南省盈江县发生M_s5.6级地震(主震A), 于5月30日在其附近再次发生M_s6.1级地震(主震B). 我们挑选云南省地震台网记录的数字波形资料, 借助于经验格林函数技术提取了这两次地震的震源时间函数,获得了其破裂历史. 为了利用经验格林函数技术提取震源时间函数,我们首先利用优选的速度模型,采用逆时成像技术重新确定了主震A和B以及挑选的6次较大余震的震源位置,并利用双差定位技术确定了主震与余震之间的相对位置;然后利用广义极性振幅技术反演了这些事件的震源机制;最后,根据主震和余震的相对位置以及震源机制特征挑选最优台站记录,提取了两个主震的震源时间函数. 结果表明,主震A持续时间约3.5 s, 分两个阶段,第一阶段0~1.3 s, 第二阶段1.3~3.5 s;主震B持续时间约5.0 s, 其过程比A复杂,至少可以分为五个阶段,第一阶段0~0.7 s, 第二阶段0.7~1.6 s, 第三阶段1.6~2.5 s,第四阶段2.5~3.8 s,第五阶段3.8~5.0 s.     

归一化总水平导数法在位场数据解释中的应用

本文提出归一化总水平导数法,通过对总水平导数进行空间归一化计算实现了异常体水平位置和深度的估计,此外还推导出基于归一化总水平导数的欧拉反褶积法来估算地下地质体的空间位置,两种方法反演结果的相互验证可有效地提高反演结果的可信度.理论模型试验证明空间归一化总水平导数法和归一化总水平导数欧拉反褶积法均能有效地完成异常体的水平位置和深度的估计,所获得的位置参数与理论值相一致.在利用归一化总水平导数法进行磁异常解释时,对数据进行化磁极计算可得到更加准确的结果.将其应用于实际航磁数据的解释,获得了岩脉的大致分布特征.     

Interpretation of magnetic and gravity gradient tensor data using normalized source strength – A case study from McFaulds Lake,Northern Ontario,Canada

In this paper, we present a case study on the use of the normalized source strength (NSS) for interpretation of magnetic and gravity gradient tensors data. This application arises in exploration of nickel, copper and platinum group element (Ni‐Cu‐PGE) deposits in the McFaulds Lake area, Northern Ontario, Canada. In this study, we have used the normalized source strength function derived from recent high resolution aeromagnetic and gravity gradiometry data for locating geological bodies. In our algorithm, we use maxima of the normalized source strength for estimating the horizontal location of the causative body. Then we estimate depth to the source and structural index at that point using the ratio between the normalized source strength and its vertical derivative calculated at two levels; the measurement level and a height h above the measurement level. To discriminate more reliable solutions from spurious ones, we reject solutions with unreasonable estimated structural indices. This method uses an upward continuation filter which reduces the effect of high frequency noise. In the magnetic case, the advantage is that, in general, the normalized magnetic source strength is relatively insensitive to magnetization direction, thus it provides more reliable information than standard techniques when geologic bodies carry remanent magnetization. For dipping gravity sources, the calculated normalized source strength yields a reliable estimate of the source location by peaking right above the top surface. Application of the method on aeromagnetic and gravity gradient tensor data sets from McFaulds Lake area indicates that most of the gravity and magnetic sources are located just beneath a 20 m thick (on average) overburden and delineated magnetic and gravity sources which can be probably approximated by geological contacts and thin dikes, come up to the overburden.     

Numerical modelling of aeolian erosion over a surface with non‐uniformly distributed roughness elements

The present study is focused on the analysis of the mean wall friction velocity on a surface including roughness elements exposed to a turbulent boundary layer. These roughness elements represent non‐erodible particles over an erodible surface of an agglomeration of granular material on industrial sites. A first study has proposed a formulation that describes the evolution of the friction velocity as a function of geometrical parameters and cover rate with different uniform roughness distributions. The present simulations deal with non‐uniform distributions of particles with a random sampling of diameters, heights, positions and arrangements. The evolution (relative to geometrical parameters of the roughness elements) of the friction velocity for several non‐uniform distributions of roughness elements was analysed by the equation proposed in the literature and compared to the results obtained with the numerical simulations. This comparison showed very good agreement. Thus, the formulation developed for uniform particles was found also to be valid for a larger spectrum of particles noted on industrial sites. The present work aims also to investigate in detail the fluid mechanics over several roughness particles. Copyright © 2013 John Wiley & Sons, Ltd.     

地震预警系统中进一步提高三台震中定位精度的方法研究

针对基于3个台站Pg震相进行震中定位时有时存在误差较大、不稳定等现象,通过分析区域速度模型差异、台站的几何分布对震中定位精度的影响,结合山东虚拟测震台网,给出了接近实际的直达Pg波视速度结构,提出了三台震中定位的综合解决方案。对2009~2013年山东虚拟测震台网内1 555次地震的震中定位结果表明,应用三台定位方法得到的震中定位误差平均为8.7 km(与台网定位结果相比),提高了震中定位的精度,减少了震中不能确定的概率。     

鲁东地区视应力时空变化特征分析

利用山东数字地震台网记录到的山东东部地区2008年以来的地震波形资料,在去除地震序列的余震之后,采用Brune模型,并结合遗传算法反演计算了225 次Mr≥2. 0地震的视应力,讨论了视应力与震级的关系,分析研究了视应力的时空变化特征,并通过视应力的时空变化来研究该区应力状态的特征。结果表明:鲁东地区中小地震的视应力范围在0.06~3.91 MPa,平均应力水平在0.31 MPa,可作为该区的背景应力水平;视应力与震级呈正相关关系,随震级的增加而升高,利用稳态回归拟合初步得到适合于该区的定量统计关系;计算的视应力值减去由震级得到的理论视应力,去除震级的相关性干扰,得到差视应力,能更真实的反应该地区的应力变化特征;视应力的时间变化显示鲁东地区目前正处于应力的积累增强阶段,可能与近期鲁东地区震群频发有关;空间分布显示目前高视应力集中区主要分布在沂沭断裂带安丘段附近和烟台附近地区,对于山东地区年度危险区的判定有一定意义。     

Semiannual velocity variations around the 2008 Mw 7.9 Wenchuan Earthquake fault zone revealed by ambient noise and ACROSS active source data

We continuously monitor the long-term seismic velocity variation of one of the major ruptured faults of the devastating 2008 Mw7.9 Wenchuan earthquake in China from July 2009 to January 2012,jointly using accurately controlled routinely operated signal system active source and seismic noise-based monitoring technique.Our measurements show that the temporal velocity change is not homogeneous and highly localized in the damaged fault zone and the adjacent areas.Velocity variations from the active and passive methods are quite consistent,which both are characterized by ±0.2 % seasonal variation,with peak and trough at winter and summer,respectively.The periodic velocity variation within fault zone exhibits remarkably positive correlation with barometric pressure with stress sensitivity in the order of 10-6Pa-1,suggesting that the plausible mechanism might be the crack density variation of the shallow subsurface medium of the damaged fault zone in response to the cyclic barometric pressure loading.