固体粒子的稳泡机理

固体粒子是良好的稳泡剂，其稳泡作用实质是在气－水界面产生吸附，形成固态膜，固态膜致密性强，机械强度高，表面粘度大。固体粒子的润湿性能，粒子大小及形状对固态膜的牢固程度有很大影响。     

Lower-crustal rifting in the Rukwa Graben, East Africa

An M_w 5.9 earthquake occurred in the Lake Rukwa rift, Tanzania, on 1994 August 18, and was well recorded by 20 broad-band seismic stations at distances of 160 to 800 km and 21 broad-band stations at teleseismic distances. The regional and teleseismic waveforms have been used to investigate the source characteristics of the main shock, and also to locate aftershocks that occurred within three weeks of the main shock. Teleseismic body-wave modelling yields the following source parameters for the main shock: source depth of 25 ± 2 km, a normal fault orientation, with a horizontal tension axis striking NE-SW and an almost vertical pressure axis (Nodal Plane I: strike 126°–142°, dip 63°–66°, and rake 280°–290°; Nodal Plane II: strike 273°–289°, dip 28°–31°, and rake 235°–245°), a scalar moment of 4.1 times 10¹⁷ N m, and a 2 s impulsive source time function. Four of the largest aftershocks also nucleated at depths of 25 km, as deduced from regional sPmp–Pmp times. The nodal planes are broadly consistent with the orientation of both the Lupa and Ufipa faults, which bound the Rukwa rift to the northeast and southwest, respectively. The rupture radius of the main shock, assuming a circular fault, is estimated to be 4 km with a corresponding stress drop of 6.5 MPa. Published estimates of crustal thickness beneath the Rukwa rift indicate that the foci of the main shock and aftershocks lie at least 10 km above the Moho. The presence of lower-crustal seismicity beneath the Rukwa rift suggests that the pre-rift thermal structure of the rifted crust has not been strongly modified by the rifting, at least to depths of 25 km.     

地层模型的三维实体显示与剖切

本文介绍了地层模型的三维实体显示的原理与方法，同时又提出了沿任意方向垂直剖切地层模型的一种实用有效算法，它已用于交互式三维地层矿床显示系统ＧＤ－３ＤＷＳ，是三维地质解释的很好工具     

Radon,Lung Cancer Risk and Environmental Geology in Gejiu Area

The incidence of lung cancer in the Gejiu area of Yunnan Province ranks the first in the world.The radon level(indoor,soil) was measured in the Gejiu area by the SSNTD method from 1990 to 1996,The result indicates an extensive high-level of indoor radon in that area though U and Th are lower in local limestones,The indoor radon level of houses located in the geologic fault zone is 6 times high that 2km far from the fault zone.The reason probably is that the radon level of soil in the fault is 6-8 times high that 1 km far from the faults.our data indicate that a lower range of radon levels,0-100Bq.m^-3,exists in healthy families.However,a higher radon level,over 800 Bq.m^-3,is often found corresponding to that of cancer patients‘ homes(the house-owners are suffering from either lung cancer or leukaemia or liver cancer),Obviously,an increase in lung cancer incidence follows an increase in indoor radon level,The risk of cancer induced by indoor radon is no longer an inference,but a fact.     

格子Boltzmann方法地震波场模拟

格子Ｂｏｌｔｚｍａｎｎ方法是细胞自动机在某些学科中的具体化和应用。它根据微观运动过程的某些基本特征建立简化的、时间和空间完全离散的动力学模型，这种模型的平行行为符合宏观的微分方程。     

Numerical simulations for coupled rock deformation and gas leak flow in parallel coal seams

Based on the new viewpoint of interaction mechanics for solid and gas, gas leakage in parallel deformable coal seams can be understood. That is, under the action of varied geophysical fields, the methane gas flow in a double deformable coal seam can be essentially considered to be compressible with time-dependent and mixed permeation and diffusion through a pore-cleat deformable, heterogeneous and anisotropic medium. From this new viewpoint, coupled mathematical models for coal seam deformation and gas leak flow in parallel coal seams were formulated and the numerical simulations for slow gas emission from the parallel coal seams are presented. It is found that coupled models might be close to reality. Meanwhile, a coupled model for solid deformation and gas leak flow can be applied to the problems of gas leak flow including mining engineering, gas drainage engineering and mining safety engineering in particular the prediction of the safe range using protective layer mining where coal and gas outbursts can efficiently be prevented. This revised version was published online in July 2006 with corrections to the Cover Date.     

Polymetallic Mineralization at the Suttsu Vein-type Deposit, Southwestern Hokkaido, Japan

Abstract. The Suttsu polymetallic vein-type deposit, hosted by tuff, tuff breccia and shale of the Miocene Kunnui Formation and propylitized hornblende-augite andesite, is located in southwestern Hokkaido, Japan. It has been exploited and explored for Cu, Pb, Zn and Ag until 1962.
In this study, we examined K-Ar ages, ore mineralogical characteristics and fluid inclusions to obtain new data for the deposit.
The K-Ar ages on sericite indicate that the polymetallic mineralization occurred in Late Miocene (8.1–5.7 Ma). The polymetallic banded ore from the Ohkubo vein is characterized by an abundance of Au, Ag, Sn, Bi, in, Se and Te. These metals are mainly ascribed to electrum (30.3–37.8 atom% Ag), Se-bearing pavonite (8.5–9.5 wt% Se), gustavite-lillianite solid solution, Se-bearing bismuthinite (5.0–5.3 wt% Se), kawazulite, cassiterite, Sn-bearing chalcopyrite (3.3–4.2 wt% Sn), In-bearing stannite, stannite-chalcopyrite solid solution, and In- and Sn-bearing sphalerite (2.6–8.4 wt% In and 1.8–4.3 wt% Sn), occurring in narrow bands of the ore. The In- and Sn-bearing sphalerite likely forms a sphalerite-roquesite-stannite solid solution with the contents of roquesite and stannite being about 2–9 and 2-A mole%, respectively. Temperatures and salinities (in wt% NaCl equiv.) of the ore fluids are estimated to be 180-250C and 3–4 wt%, respectively. The Sn-bearing chalcopyrite therefore probably precipitated metastably. The geologic and mineralogical features suggest that pre-Tertiary basement rocks rich in organic material underlie the Miocene Kunnui Formation nearby the deposit and that they contributed to local and temporary reduction of magnetite-series magmas favorable for the early stage tin-polymetallic mineralization.     

Pressure State in Deep Crust and Formation Depth of UHP Metamorphic Rocks

INTRODUCTIONSincethediscoveryofeclogiteswithcoesiteanddia mondinclusionsrelatedtothecontinent continentcollision orogenyenvironment,theultrahigh pressuremetamorphism(UHPM )intheDabie Suluhasarousedgreatinterestinmanygeologists (Liouetal .,1994 ;Xuetal.,1992 ) .Experimentalstudieshaveprovedthatsuchmineralsasdia mond ,coesiteandomphaciteoccurredat 2 - 5GPa (andatthecorrespondingtemperatures) (Stevenetal.,1982 ;MirwaldandMasonne ,1980 ) .However,itdoesnotmeanthatthemetamorphicrockscanbe…