隧道-洞口滑坡体系受力特征及变形模式

随着我国高速铁路在西部地区的大规模建设,隧道在线路中所占的比例越来越高,洞口隧道在滑坡作用下产生的病害越来越严重。然而,我国目前在隧道-洞口滑坡体系设计中没有可供参考的受力变形模式,因此本文以隧道-洞口滑坡为研究对象,通过对云南功东高速公路中隧道-滑坡工程实例的总结及工程地质模型的建立,对滑坡推力作用下的隧道变形模式进行研究,得到如下结论:(1)将隧道-洞口滑坡分为与滑面相交和下穿滑体两种模式,与滑面相交的隧道直接受到剩余滑坡推力的作用,而下穿滑体的隧道主要承受附加荷载的影响;(2)位于滑体内隧道承受围岩压力、滑坡推力和岩土抗力的作用,可将洞口有刚性支撑的隧道-滑坡结构简化为简支梁,无刚性支撑作用下的隧道-滑坡结构简化为悬臂梁;(3)下穿滑体隧道在附加荷载的影响下,拱部承受多余的压力而受到偏压作用,拱顶形成受拉区域,出现拉张裂缝。     

酒东盆地酒泉市区地热资源勘查开发前景再分析

酒东盆地是酒泉、嘉峪关两市所在地,据以往石油勘探和近年地热勘查资料分析,对控制地热资源的地质构造和地层结构条件重新再认识。基于酒泉周边地段地热井实施,因水温不高而制约和影响对地热资源的开发利用,本文通过地热井和物探勘查资料对比,明确了热储层位和水温不高的原因,揭示出市区地热开发有利地段。并认为地热勘查方法中可控源音频大地电磁和地震勘探方法较已往直流电测深对勘查目的热储层有更高分辩率和有效性。     

鄂尔多斯盆地塔然高勒地区直罗组上、下段的岩性-岩相特征及对铀成矿的差异性控制作用

为查明鄂尔多斯盆地塔然高勒地区直罗组上段、下段的岩性-岩相特征以及参与蚀变作用的流体强度差异,开展了系统的岩心观察、剖面对比,并结合黏土矿物、碳氧同位素和U、Th元素等手段进行分析。结果表明,研究区南部直罗组上段主要由灰绿色、红色泥岩夹透镜状红色、黄色、灰绿色砂岩组成,北部主要由红色泥岩与灰绿色砂岩构成,南北部下段均由灰白色、灰绿色砂岩或砂砾岩夹薄层泥岩组成。直罗组红色砂岩为原生沉积,灰绿色砂岩为后生改造类型;上段受含氧含铀水和深部还原性流体作用强度较下段变弱,且由北向南作用程度降低,北部还原蚀变岩石与原生岩石共存,南部基本保留原生岩石;下段则受流体改造更为充分,主体为后生蚀变岩石。直罗组不同类型砂体的展布兼受沉积相和后期流体双重作用,但强弱差异性明显,限制了铀矿化产出在直罗组下段砂体中的定位,因此,上、下段应作为不同的成矿体系讨论。     

区域性活动断裂带对高速公路路线方案的影响与控制——以康定新都桥至炉霍高速公路为例

康定至炉霍公路走廊沿鲜水河活动断裂带展布,断层活动造成区域地形地质条件非常复杂:地震频发、山地灾害多发,路线方案的合理布设事关项目成败。本文通过系统地搜集、整理和分析前人成果,研究论述了区域宏观构造格架、鲜水河断裂带及活动性、山地灾害等内外动力地质作用特征及相关的重大工程地质问题,在此基础上分析了断裂活动对路线方案的影响与控制作用,提出了路线方案的宏观思路见解和地震、地质灾害的专题研究建议。为路线方案设计及行业工程技术人员提供参考。     

基于堆积层厚度变化的侏罗系顺向岸坡变形机制转换研究

三峡库区侏罗系顺向岸坡堆积体滑坡众多,其滑动模式存在一定差异。首先统计分析了192个三峡库区侏罗系层位发育的堆积体滑坡滑体及碎石土的工程地质性质和强度参数。在此基础上,运用数值分析软件对堆积体厚度变化引起的滑坡变形机制进行模拟分析。结果表明:堆积体厚度范围在15m及以下滑坡会沿着岩土界线面滑动、15~35m时滑坡会沿着层内剪切面滑动;厚度范围在35m以上时,堆积体滑坡内部可能存在着多层滑带,即滑坡可能沿着层内剪切面滑动或者沿着岩土界线面滑动。堆积体厚度范围在15m及以下时滑坡的治理措施可采用布置抗滑桩;厚度范围15~35m时可采用排水+布置抗滑桩的滑坡治理措施;厚度范围在35m以上时,可采用滑坡前期监测预报+后期根据滑坡发育情况相结合的滑坡防治措施。     

袖阀管注浆在人工填土暗挖施工中的应用

阜石路分洪暗涵某暗挖段,浅涵暗挖洞身大部位于人工填土内,部分区域洞底人工填土厚度仍达2m。人工填土松散,自稳能力差,易发生塌落现象,不易成洞,施工难度大。为避免暗挖施工期间人工填土产生安全隐患并减少后期隧道变形,采用了袖阀管注浆技术对填土地层进行注浆加固,以确保工程施工安全及隧道工程质量&根据工程实施效果可见,袖阀管注浆加固对在人工填土中进行暗挖隧道开挖的沉降、变形控制的效果较好。     

矿山环境治理过程中资金运作模式探索与实践

矿山环境治理恢复基金制度之所以取代矿山地质环境治理恢复保证金制度,目的之一是通过基金的合理运营,为矿山环境治理提供长效稳定的资金保障。通过对矿山地质环境治理恢复保证金制度中的资金问题进行剖析,从基金来源、基金运营、基金投入三个方面提出矿山环境治理过程中新的商业运作模式,并从市场化角度对社会资本进入矿山复绿和综合利用进行了探索,以期对矿山环境治理恢复基金制度的建立提供一定的指导和参考。     

川南煤田龙潭组煤系泥页岩气与煤层气组合模式及合采前景分析

文中研究的上二叠统龙潭组煤层及其顶底板泥页岩含气性特征、组合模式及合采对煤系气勘探开发意义重大。为改变煤层气产业低产低效长周期的现状,实现综合效益的目标,将龙潭组作为目标层进行研究;简述了川南煤田龙潭组含气泥页岩与煤层的组合模式,并初步探讨了上述组合模式合探合采的必要性、条件和前景,并提出了开展综合勘探开采的建议。     

Identification of the anomaly component using BEMD combined with PCA from element concentrations in the Tengchong tin belt,SW China

Concentration of elements or element groups in a geological body is the result of multiple stages of rockforming and ore-forming geological processes.An ore-forming element group can be identified by PCA(principal component analysis)and be separated into two components using BEMD(bi-dimensional empirical mode decomposition):(1)a high background component which represents the ore-forming background developed in rocks through various geological processes favorable for mineralization(i.e.magmatism,sedimentation and/or metamorphism);(2)the anomaly component which reflects the oreforming anomaly that is overprinted on the high background component developed during mineralization.Anomaly components are used to identify ore-finding targets more effectively than ore-forming element groups.Three steps of data analytical procedures are described in this paper; firstly,the application of PCA to establish the ore-forming element group;secondly,using BEMD on the o re-forming element group to identify the anomaly components created by different types of mineralization processes; and finally,identifying ore-finding targets based on the anomaly components.This method is applied to the Tengchong tin-polymetallic belt to delineate ore-finding targets,where four targets for Sn(W)and three targets for Pb-Zn-Ag-Fe polymetallic mineralization are identified and defined as new areas for further prospecting.It is shown that BEMD combined with PCA can be applied not only in extracting the anomaly component for delineating the ore-finding target,but also in extracting the residual component for identifying its high background zone favorable for mineralization from its oreforming element group.     

Characteristics of boundary fault systems and its hydrocarbon controlling on hydrocarbon accumulation in Awati Sag,Tarim Basin,China

Based on the interpretation of two-dimensional seismic data, this paper analyzes the characteristics of three boundary fault systems including the Shajingzi fault, the Aqia fault and the Tumuxiuke fault around the Awati sag of the Tarim Basin, and studies its controlling on hydrocarbon accumulation. Neotectonic movement is ubiquitous in oil and gas bearing basins in China, such as Neogene intense activities of large boundary thrusting faults of the Awati sag: Shajingzi fault, Aqia fault and Tumuxiuke fault. Based on a large number of seismic data, it is showed that they have section wise characteristics in the direction of fault strike, and active periods and associated structures formed of different sections are different. Usually, large anticlinal structures are formed in the upper wall, and faulted anticline controlled by companion faults are formed in the bottom wall. Large faults cut the strata from Cambrian up to Neogene. For the anticline in the upper wall, fault activities caused by neotectonic movement played a destructive role in hydrocarbon accumulation, thus the preservation condition is critical for reservoir formation. In this sense, attention should be paid to formations in the upper walls of Aqia fault and Tumuxiuke fault under the Cambrian salt bed, whose plastic deformation could help to heal faults. Companion faults in the bottom wall cut down to the Cambrian and up to the Triassic serving as the pathway for hydrocarbon migration, and associated structures in the bottom wall are noteworthy exploration targets.©2019 China Geology Editorial Office.