The Role of Pre-existing Structures in the Origin, Propagation and Architecture of Faults in the Main Ethiopian Rift

Four major fault systems oriented N–S to NNE–SSW, NE–SW, E–W and NW–SE are identified from Landsat Thematic Mapper (TM) images and a high resolution digital elevation model (DEM) over the Ethiopian Rift Valley and the surrounding plateaus. Most of these faults are the result of Cenozoic - extensional reactivation of pre-existing basement structures. These faults interacted with each other at different geological times under different geodynamic conditions. The Cenozoic interaction under an extensional tectonic regime is the major cause of the actual volcano-tectonic landscape in Ethiopia. The Wonji Fault Belt (WFB), which comprises the N–S to NNE–SSW striking rift floor faults, displays peculiar propagation patterns mainly due to interaction with the other fault systems and the influence of underlying basement structures. The commonly observed patterns are: curvilinear oblique-slip faults forming lip-horsts, sinusoidal faults, intersecting faults and locally splaying faults at their ends. Fault-related open structures such as tail-cracks, releasing bends and extensional relay zones and fault intersections have served as principal eruption sites for monogenetic Plio-Quaternary volcanoes in the Main Ethiopian Rift (MER).     

四川某矿山边坡失稳机理及稳定性评价

四川某矿山开采边坡迄今已有30余年,随采区规模的逐渐扩大,在矿区南坡构成一典型的顺层开挖边坡,因矿层中夹有不同数量的软弱夹层,在边坡前缘破坏坡角、并加上降雨及爆破振动影响,时常发生颁层滑坡,不仅给矿山人民生命财产带来严重危害,而且也严重制约矿山的正常发展。通过对典型开挖边坡所在部位的工程地质条件凋查,在确定影响边坡稳定的主要控制因素和边界条件的基础上。考虑四种工况条件下的稳定性分析和评价,为矿山下一步施工提出了较为合理的开挖方案。     

Coastline configuration and geomorphologic development mode of arc-shaped coast in South China

1IntroductionArc-shaped bays are quite common on exposed sediment coast in South China, where the crenulate-bay beaches occur with the presence of two consecutive headlands and a predominant wave approach oblique to the alignment of the upcoast and downcoast headlands (Yasso, 1965). Oblique persistent swell striking a shoreline transports sediment alongshore and sculptures a coast into arc-shaped beaches. The shoreline of beach appearance mainly consists of straight segment and shadow segment…     

图像控制点数据库的设计与实现

地面控制点数据是航天航空图像摄影测量几何处理的必需数据。文中首先比较了控制点数据的存储管理方式，即采用文件系统方式与数据库方式的优缺点；接着分析了控制点图像数据的特征，从而提出了图像控制点数据的数据库存储方案，讨论了图像控制点数据库的查询方法；最后结合文中的方法，设计并且实现了一个控制点图像数据库管理与应用实验系统。通过分析认为，建立控制点图像数据库是重复利用控制点资源的有效途径。     

地图扫描数字化的质量分析与评价

通过分析地图扫描数字化的误差因素．运用质量控制图评价学生实验数据质量，能够直观地对学生实验数据做出判断，同时也能比较各个实验小组及班级之间总体实验水平，及时发现实验准备工作中及实验方法本身的有关问题。     

基于扫描矢量化地图数据生产的数据质量控制

概述了基于扫描矢量化GIS数据的生产过程 ,介绍了扫描矢量化质量控制的策略和方法 ,在地图扫描阶段采用栅格图纠正的方法对地图的变形进行纠正 ,以提高矢量化原图的质量 ,在基于扫描矢量化GIS数据的生产过程中 ,可从算法和软件使用工艺方面提高数据的质量     

南方NGS200应用实践中的若干问题

对南方NGS200在工程控制测量领域应用实践中的一些问题作了阐述，提出了一些见解和措施。     

Probabilistic approach for active control of structures: experimental verification

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.     

Seismic response analysis of multidrum classical columns

This paper presents a numerical investigation on the seismic response of multidrum classical columns. The motivation for this study originates from the need to understand: (a) the level of ground shaking that classical multidrum columns can survive, and (b) the possible advantages or disadvantages of retrofitting multidrum columns with metallic shear links that replace the wooden poles that were installed in ancient times. The numerical study presented in this paper is conducted with the commercially available software Working Model 2D?, which can capture with fidelity the sliding, rocking, and slide‐rocking response of rigid‐body assemblies. This paper validates the software Working Model by comparing selected computed responses with scarce analytical solutions and the results from in‐house numerical codes initially developed at the University of California, Berkeley, to study the seismic response of electrical transformers and heavy laboratory equipment. The study reveals that relative sliding between drums happens even when the g‐value of the ground acceleration is less than the coefficient of friction, µ, of the sliding interfaces and concludes that: (a) typical multidrum classical columns can survive the ground shaking from strong ground motions recorded near the causative faults of earthquakes with magnitudes M_w=6.0–7.4; (b) in most cases multidrum classical columns free to dislocate at the drum interfaces exhibit more controlled seismic response than the monolithic columns with same size and slenderness; (c) the shear strength of the wooden poles has a marginal effect on the sliding response of the drums; and (d) stiff metallic shear links in‐between column drums may have an undesirable role on the seismic stability of classical columns and should be avoided. Copyright © 2005 John Wiley & Sons, Ltd.