Evaluating local population dynamics of the American lobster,Homarus americanus,with trap‐based mark‐recapture methods and seabed mapping

Seabed mapping, spatially referenced trapping, and mark‐recapture methods have all been useful tools in ecological studies of lobsters and other benthic animals. Here we integrate the three methods to evaluate local population dynamics and movements of American lobsters, Homarus americanus, in coastal fishing grounds in Maine, United States. The study was conducted on five study areas of different size, and used two different sampling protocols. At one site (1 km² in area) we used a monthly mark‐recapture sampling interval over a 6‐month period, only tagging a subsample of the catch. At four smaller sites (0.3 km²) we used a shorter‐term approach, sampling at 3–4‐day intervals for a 2‐week duration, tagging the entire catch. Tagging data were analysed with a modified Jolly‐Seber model adapted for continuous sampling to estimate population abundance, gains (immigration), and losses (emigration and mortality). Side‐scan sonar surveys of the seabed combined with diver‐based population surveys, stratified by substrate type, provided an independent comparison to mark‐recapture‐based estimates of abundance over the same areas. Spatial referencing of trap catch also allowed us to relate catch rates and lobster movements directly to seabed features. The longer‐term tagging data on the larger study area provided abundance estimates that were more consistent with the diver observations, and estimates of gains and losses statistically more robust, than those derived from the shorter‐term effort on the smaller sites. The flux of lobsters followed the well known seasonal movements on these fishing grounds, with gains and losses from the larger study area ranging over 1000 individuals per day, and an estimated mid‐summer peak density of >65 000 lobsters per km² (individuals >50 mm carapace length). This approach may lend itself to broader application with the American lobster.     

基于土地利用变化的生态风险评价——以广西岑溪市为例

该文以1999年及2009年岑溪市土地利用数据为来源,在GIS的支持下,分析了10年来研究区内的土地利用变化的时空特点及其转化过程,结合土地利用综合指数、耕地垦殖指数、植被覆盖指数、景观破碎度指数评价了土地利用变化的生态风险。研究表明：研究区域内10年间土地利用类型发生了复杂的相互转换,其中林草地、建设用地和耕地为研究区内变化面积最大的3种土地利用类型;受经济快速发展和城市化进程加快的影响,土地利用的广度和深度不断增大,全市土地利用趋于破碎化,土地生态风险程度有所增加。     

Constraints of Mantle and Crustal Sources Interaction during Orogenesis of Pre- and Post-collision Granitoids from the Northern Arabian-Nubian Shield: A Case Study from Wadi El-Akhder Granitoids,Southern Sinai,Egypt

The Egyptian older and younger granitic rocks emplaced during pre- and post-collision stages of Neoproterozoic Pan-African orogeny, respectively, are widely distributed in the southern Sinai Peninsula, constituting 70% of the basement outcrops. The Wadi El-Akhder, southwestern Sinai, is a mountainous terrain exposing two granitoid suites, namely the Wadi El-Akhder Older Granites (AOG) and the Homra Younger Granites (HYG). The AOG (granodiorites with subordinate tonalite compositions) have geochemical characteristics of medium-K calc-alkaline, metaluminous to mildly peraluminous granitoids formed in an island-arc environment, which are conformable with well-known Egyptian older granitoids rocks, whereas the HYG display calc-alkaline to slightly alkaline nature, peraluminous syeno-, monzogranites and alkali feldspar granites matching well those of the Egyptian younger granites. With respect to the AOG granitoids, the HYG granites contain lower Al2O3, FeO*, MgO, MnO, CaO, TiO2, Sr, Ba, and V, but higher Na2O, K2O, Nb, Zr, Th, and Rb. The AOG are generally characterized by enrichment in LILE and LREE and depletion in HFSE relative to N-MORB values (e.g., negative Nb and Ta anomalies). The geochemical features of the AOG follow assimilation-fractional crystallization (AFC) trends indicative of extensive crustal contamination of magma derived from a mantle source. The chemical characteristics of the AOG are remarkably similar to those of subduction-related granitoids from the Arabian-Nubian Shield (ANS). The compositional variations from monzogranites through syenogranites to alkali feldspar granite within HYG could not be explained by fractional crystallization solely. Correlating the whole-rock composition of the HYG to melts generated by experimental dehydration melting of meta-sedimentary and magmatic rocks reveals that they appear to be derived by extended melting of psammitic and pelitic metasediments, which is similar to the most of younger granitic suites in the ANS.     

地震作用下相邻地下结构与土相互作用特性研究

针对简单框架式地铁车站结构的抗震特性研究已取得一定成果,但对于结构形式较复杂或多个地下结构间相互作用等问题仍需进一步探究。本文利用现有地震分析方法中的动力时程分析法对两个地下结构间相互作用的影响进行系统对比分析,其中主体结构为三层三跨车站、附属结构为两层三跨车站。主要探讨附属结构与主体结构间距离的变化、两结构间连接形式对场地土以及主体结构地震响应特性的影响,分析比较场地土变形、主体结构变形、层间位移角以及内力在不同工况下的地震响应特性。结果表明:相邻地下结构与土相互作用形式较独立结构与土相互作用形式对场地土影响更加明显;当附属结构与主体结构间距离超过两倍结构宽度,附属结构对主体结构周围场地变形影响效应可基本忽略;同样当附属结构与主体结构间距离超过两倍的结构宽度,附属结构对主体结构的变形、内力基本已无影响,因此地震情况下相邻结构间相互作用影响范围基本为两倍结构宽度。与此同时,附属结构的存在对于主体结构抗震特性是不利的,不同连接形式中单层通道连接的形式变形以及内力方面均小于双层通道连接形式。     

Optimum design and application of non‐traditional tuned mass damper toward seismic response control with experimental test verification

A variant type of tuned mass damper (TMD) termed as ‘non‐traditional TMD (NTTMD)’ is recently proposed. Mainly focusing on the employment of TMD for seismic response control, especially for base‐isolated or high‐rise structures, this paper aims to derive design formulae of NTTMDs based on two methodologies with different targets. One is the fixed points theory with the performance index set as the maximum magnitude of the frequency response function of the relative displacement of the primary structure with respect to the ground acceleration, and the other is the stability maximization criterion (SMC) to make the free vibration of the primary structure decay in the minimum duration. Such optimally designed NTTMDs are compared with traditional TMDs by conducting both numerical simulations and experiments. The optimum‐designed NTTMDs are demonstrated to be more effective than the optimum‐designed traditional TMDs, with smaller stroke length required. In particular, the effectiveness of the TMDs combined with a base‐isolated structure is investigated by small‐scale model experimental tests subjected to a time scaled long period impulsive excitation, and it is demonstrated that the SMC‐based NTTMD can suppress structural free vibration responses in the minimum duration and requires much smaller accommodation space. Additionally, a small‐scale shaking table experiment on a high‐rise bending model attached with a SMC‐based NTTMD is conducted. This study indicates that NTTMD has a high potential to apply to seismic response control or retrofit of structures such as base‐isolated or central column‐integrated high‐rise structures even if only a limited space is available for accommodating TMDs. Copyright © 2015 John Wiley & Sons, Ltd.     

Paleo‐fires and Atmospheric Oxygen Levels in the Latest Permian: Evidence from Maceral Compositions of Coals in Eastern Yunnan,Southern China

Inertinite maceral compositions of the Late Permian coals from three sections in the terrestrial and paralic settings of eastern Yunnan are analyzed in order to reveal the paleo-fire events and the atmospheric oxygen levels in the latest Permian. Although the macerals in the studied sections are generally dominated by vitrinite, the inertinite group makes up a considerable proportion. Its content increases upward from the beginning of the Late Permian to the coal seam near the Permian-Triassic boundary. Based on the microscopic features and the prevailing theory that inertinite is largely a by-product of paleo-fires, we suggest that the increasing upward trend of the inertinite abundance in the latest Permian could imply that the Late Permian peatland had suffered from frequent wildfires. Since ignition and burning depend on sufficient oxygen, a model-based calculation suggests that the O2 levels near the Wuchiapingian/Changhsingian boundary and the Permian-Triassic boundary are 27% and 28% respectively. This output adds supports to other discoveries made in the temporal marine and terrestrial sediments, and challenges the theories advocating hypoxia as a mechanism for the Permian-Triassic boundary crisis.     

Contrasting water–rock interaction behaviors of antimony and arsenic in contaminated rivers around an antimony mine,Hunan Province,China

Although antimony (Sb) and arsenic (As) exhibit similar geochemical behavior and toxicity in the environment, growing evidence suggests that their water–rock interaction behavior in contaminated rivers is quite different. Twenty-nine river water samples were collected between September and November 2018 from contaminated rivers around an antimony mine in Hunan Province, China. The concentrations of As and Sb were inversely proportional to the water flow distance. The rates and magnitudes of Sb decrease were more prominent than those of As. Silicate mineral dissolution from rocks such as silicified limestone increased the As and Sb concentration of in-mine-district (IMD) water. Dissolution of carbonate minerals, ion exchange, and competitive adsorption were the major water–rock interactions, resulting in rapidly decreasing As and Sb concentration in IMD direct impacted water and IMD indirect impacted water. The behaviors of As and Sb during water–rock interaction were dissimilar for areas dominated by carbonate and silicate minerals.     

A new approach of selecting real input ground motions for seismic design: The most unfavourable real seismic design ground motions

This paper presents a new way of selecting real input ground motions for seismic design and analysis of structures based on a comprehensive method for estimating the damage potential of ground motions, which takes into consideration of various ground motion parameters and structural seismic damage criteria in terms of strength, deformation, hysteretic energy and dual damage of Park & Ang damage index. The proposed comprehensive method fully involves the effects of the intensity, frequency content and duration of ground motions and the dynamic characteristics of structures. Then, the concept of the most unfavourable real seismic design ground motion is introduced. Based on the concept, the most unfavourable real seismic design ground motions for rock, stiff soil, medium soil and soft soil site conditions are selected in terms of three typical period ranges of structures. The selected real strong motion records are suitable for seismic analysis of important structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake, as they can cause the greatest damage to structures and thereby result in the highest damage potential from an extended real ground motion database for a given site. In addition, this paper also presents the real input design ground motions with medium damage potential, which can be used for the seismic analysis of structures located at the area with low and moderate seismicity. The most unfavourable real seismic design ground motions are verified by analysing the seismic response of structures. It is concluded that the most unfavourable real seismic design ground motion approach can select the real ground motions that can result in the highest damage potential for a given structure and site condition, and the real ground motions can be mainly used for structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake. Copyright © 2007 John Wiley & Sons, Ltd.     

Degradation and Detoxification of Chlorophenols in Continuous‐Flow Fixed‐Bed Aerobic Reactors

An indigenous bacterial strain of Delftia sp. capable of degrading 2,4‐dicholorophenol and an indigenous bacterial community that degrades 2,4,6‐trichlorophenol (TCP) were employed to inoculate continuous down‐flow fixed‐bed reactors. Continuous‐reactors were constructed from PVC employing hollow PVC cylinders as support material. Synthetic wastewater was prepared by dissolving the corresponding chlorophenol in non‐sterile groundwater. Biodegradation was evaluated by spectrophotometry, chloride release, GC, and microbial growth. Detoxification was evaluated by using Daphnia magna as test organism. Delftia sp. was able to remove an average of 95.6% of DCP. Efficiency in terms of chemical oxygen demand (COD) was of 88.9%. The indigenous bacterial community that degrades TCP reached an average efficiency of 96.5 and 91.6% in terms of compound and COD removal, respectively. In both cases stoichiometric removal of chloride and detoxification was achieved. When synthetic wastewater feed was cut off for 7 days, both reactors showed a fast recovery after inflow restarting, reaching average outlet concentration values within 36 h. The promising behavior of the microorganisms and the low cost of the reactors tested allow us to suggest their possible application to remediation processes.     

Study of Metal Distribution in Raw and Screened Swine Manure

The growth of industrial swine production over the last few years has led to a growth in concern over effluents generated by the activity. Several elements, mainly toxic metals, can be present in swine wastewater and can have a serious environmental impact. It is important, therefore, to know the metal concentration before the discharge of wastewater. In this work the temporal metal distribution in swine manure and its potential reduction using coarse (2 mm) and fine (<0.45 μm) liquid‐solid separation techniques were investigated. In order to do this, different swine manure sample preparation methods for Al, Ba, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sr and Zn determination by Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) were tested. The acid mixtures used to digest the manure sample significantly affected the metal recovery. Good analyte recoveries were observed with nitric acid/hydrogen peroxide mixtures or nitric acid/perchloric acid mixtures. Sulfuric acid/hydrogen peroxide mixtures produced inconsistent results and poor recoveries, mainly for Ba and Pb. It was observed that metal concentrations in swine manure varied greatly with time, up to one order of magnitude, due to changes in swine production such as feed and animal numbers. Metals concentrations observed in the raw wastewater exceeded Brazilian limits for discharge into water bodies and recommendations for agricultural use. Results obtained from the liquid‐solid separation study showed that metals in the raw swine manure were not removed with coarse screening. However, the major fraction of metals were removed by filtration (0.45 μm), with the exception of Na, K and Sr. Thus, the use of liquid‐solid separation techniques that capture the fine solid fractions (and associated metals) from raw manure can have a favorable impact on the environment and contribute to swine production wastewater treatment.