Assessing the performance of a large-scale irrigation system by estimations of actual evapotranspiration obtained by Landsat satellite images resampled with cubic convolution

Remote sensing techniques allow monitoring the Earth surface and acquiring worthwhile information that can be used efficiently in agro-hydrological systems. Satellite images associated to computational models represent reliable resources to estimate actual evapotranspiration fluxes, ET_a, based on surface energy balance. The knowledge of ET_a and its spatial distribution is crucial for a broad range of applications at different scales, from fields to large irrigation districts. In single plots and/or in irrigation districts, linking water volumes delivered to the plots with the estimations of remote sensed ET_a can have a great potential to develop new cost-effective indicators of irrigation performance, as well as to increase water use efficiency. With the aim to assess the irrigation system performance and the opportunities to save irrigation water resources at the “SAT Llano Verde” district in Albacete, Castilla-La Mancha (Spain), the Surface Energy Balance Algorithm for Land (SEBAL) was applied on cloud-free Landsat 5 Thematic Mapper (TM) images, processed by cubic convolution resampling method, for three irrigation seasons (May to September 2006, 2007 and 2008). The model allowed quantifying instantaneous, daily, monthly and seasonal ET_a over the irrigation district. The comparison between monthly irrigation volumes distributed by each hydrant and the corresponding spatially averaged ET_a, obtained by assuming an overall efficiency of irrigation network equal to 85%, allowed the assessment of the irrigation system performance for the area served by each hydrant, as well as for the whole irrigation district. It was observed that in all the investigated years, irrigation volumes applied monthly by farmers resulted generally higher than the corresponding evapotranspiration fluxes retrieved by SEBAL, with the exception of May, in which abundant rainfall occurred. When considering the entire irrigation seasons, it was demonstrated that a considerable amount of water could have been saved in the district, respectively equal to 26.2, 28.0 and 16.4% of the total water consumption evaluated in the three years.     

南海盐致环流对台风降水的响应特征分析

本文采用多源卫星遥感数据通过统计分析的方法研究了17年间(2000—2016年)南海夏季(6—9月)台风对该海域降水、淡水通量的贡献及其可能导致的环流异常。主要结论如下: 1) 台风是南海中北部降水的重要影响因子, 可导致日平均降水量增加12mm, 约占南海夏季日平均降水(25mm·d ^-1)的一半, 且西北太平洋台风和南海“土台风”产生的降水分布存在显著的区域和强度差异; 2) 夏季, 南海由淡水通量引起的盐致环流表现为以海南岛东南部海域为中心的弱气旋式, 其流量量级约为-0.15Sv, 约占同期风生环流流量(约为-1.5Sv)的10%; 3) 夏季, 台风带来的降水使得南海中北部的气旋式盐致环流增强, 且西北太平洋台风降水导致的淡水通量变化引起的盐致环流强度要强于南海“土台风”。     

太平洋副热带东部模态水的年际变化及机制研究

根据2004—2014年的全球海洋Argo网格数据集(BOA_Argo)和ECMWF ERA-Interim再分析资料,计算了冬季太平洋副热带东部海区的水团变性率及水团形成率,对南北太平洋副热带东部新生成模态水的年际变化及其形成机制进行了研究。结果表明:北太平洋副热带东部模态水(NPESTMW)和南太平洋副热带东部模态水(SPESTMW)的新生成体积及核心密度在2004—2014年具有明显的年际变化:NPESTMW主要经历了2005—2009年和2010—2013年2次持续4～5a的体积和密度增加过程,其中体积最大值出现在2009年,最小值则出现在2005和2014年。南半球SPESTMW则经历了2007—2009年和2010—2013年共两次持续3～4a的体积和密度减小过程,其中体积的最小值出现在2009、2013年,最大值出现在2010年。合成分析发现,由冬季海面热通量异常引起的深混合层内与模态水密度相当的水团表层形成率异常,可能是导致NPESTMW和SPESTMW新生成水体积年际变化的重要因素;同时,SPESTMW新生成水的年际变化受局地风应力旋度的年际变化影响明显。     

利用浮标资料初步评估NCEP再分析湍通量

通过与浮标观测资料的对比分析,指出NCEP动量通量、再计算NCEP热通量更能够代表NCEP再分析数据库的数值模拟效果。当风速大于20m/s时,数值模拟的湍通量低于浮标块体湍通量,当风速在10～20m/s时,数值模拟的湍通量高于浮标块体湍通量。同时还发现数值模拟结果的延迟现象,以及不能反映大风过后快速的海气温差变化而引起的感热通量变化。     

Estimates of global M_2 internal tide energy fluxes using TOPEX/POSEIDON altimeter data

TOPEX/POSEIDON altimeter data from October 1992 to June 2002 are used to calculate the global barotropic M2 tidal currents using long-term tidal harmonic analysis. The tides calculated agree well with ADCP data obtained from the South China Sea (SCS). The maximum tide velocities along the semi-major axis and semi-minor axis can be computed from the tidal ellipse. The global distribution of M2 internal tide vertical energy flux from the sea bottom is calculated based on a linear internal wave generation model. The global vertical energy flux of M2 internal tide is 0.96 TW, with 0.36 TW in the Pacific, 0.31 TW in the Atlantic and 0.29 TW in the Indian Ocean, obtained in this study. The total horizontal energy flux of M2 internal tide radiating into the open ocean from the lateral boundaries is 0.13 TW, with 0.06 TW in the Pacific, 0.04TW in the Atlantic, and 0.03 TW in the Indian Ocean. The result shows that the principal lunar semi-diurnal tide M2 provides enough energy to maintain the large-scale thermohaline circulation of the ocean.     

Comparisons of several evaporation/precipitation datasets for the Bohai Sea based on salinity simulation

Evaporation (E) rate and precipitation (P) rate are two significant meteorological elements required in the ocean baroclinic modeling as external forcings. However, there are some uncertainties in the currently used E/P rates datasets, especially in terms of the data quality. In this study, we collected E/P rates data from ERA-40, NCEP/NCAR Reanalysis, HOAPS for the Bohai Sea and nine routine stations around Laizhou Bay, and made comparisons among them. It was found that the differences in E/P rates between land and sea are remarkable, which was due to the difference in underlying surfaces. Therefore, the traditional way of using E/P rates acquired on land directly at sea is not correct. Since no final conclusion has been reached concerning the net water transport between the Bohai Sea and the Yellow Sea, it is unfeasible to judge the adequacy of the four kinds of data by using the water budget equation. However, the E/P rates at ERA-40 sea points were considered to be the optimal in terms of temporal/spatial coverage and resolution for the hindcast of salinity variation in the Bohai Sea. Besides, using the 3-D hydrodynamic model HAMSOM (HAMburg Shelf Ocean Model), we performed numerical experiments with different E/P datasets and found that the E/P rates at sea points from ERA-40 dataset are better than those from NCEP/NCAR Reanalysis dataset. If NCEP/NCAR Reanalysis E/P rates are to be used, they need to be adjusted and tested prior to simulation so that more close-to-reality salinity values can be reproduced.     

Coupling winds to ocean surface currents over the global ocean

A Wind stress–Current Coupled System (WCCS) consisting of the HYbrid Coordinate Ocean Model (HYCOM) and an improved wind stress algorithm based on Donelan et al. [Donelan, W.M., Drennan, Katsaros, K.B., 1997. The air–sea momentum flux in mixed wind sea and swell conditions. J. Phys. Oceanogr. 27, 2087–2099] is developed by using the Earth System Modeling Framework (ESMF). The WCCS is applied to the global ocean to study the interactions between the wind stress and the ocean surface currents. In this study, the ocean surface current velocity is taken into consideration in the wind stress calculation and air–sea heat flux calculation. The wind stress that contains the effect of ocean surface current velocity will be used to force the HYCOM. The results indicate that the ocean surface velocity exerts an important influence on the wind stress, which, in turn, significantly affects the global ocean surface currents, air–sea heat fluxes, and the thickness of ocean surface boundary layer. Comparison with the TOGA TAO buoy data, the sea surface temperature from the wind–current coupled simulation showed noticeable improvement over the stand-alone HYCOM simulation.     

海气通量算法在海上蒸发波导诊断中的应用

利用TOGA COARE Bulk Air-Sea Flux Algorithm3.0,建立了基于通量算法的蒸发波导模型(Flux Evaporation duct Model),并进行了环境敏感性分析,而且与Paulus-Jeske模型对比,进行误差敏感性分析,并开展了雷达探测评估的海上试验,较全面的阐述了基于通量算法的蒸发波导模型的性能。     

Denitrification in Qi'ao Island coastal zone, the Zhujiang Estuary in China

Samples of sediments and the overlying water were collected in the Qi'ao Island coastal zone, the Zhujiang (Pearl River) Estuary (ZE). Denitrification rates, sediment oxygen demand (SOD) , and fluxes of inorganic nitrogen compounds were investigated with N2 flux method, using a self-designed continuous flow through and auto-sampling system. The results indicate that the denitrification rates varied between 222 and 908 μmol/(m2·h) with an average of 499 μmol/(m2·h). During incubation, the sediments absorbed dissolved oxygen in the overlying water with SOD ranging from 300 to 2 363 μmol/(m2·h). The denitrification rates were highly correlated with the SOD (r2 =0.77) regardless of the NO3- + NO2- concentrations in the overlying water, organ- ic carbon contents in sediments and water temperature, suggesting that the SOD was probably the main environ-mental factor controlling the denitrification in the Qi'ao Island coastal zone. There was a net flux of NO3- + NO2-into the sediments from the overlying water. The NH4+ flux from sediments into water as the result of mineraliza-tion was between 12. 3 and 210. 3 μmol/(m2·h) ,which seems limited by both organic carbon content in sedi-ment and dissolved oxygen concentration in the overlying water.     

MedFlux: Investigations of particle flux in the Twilight Zone

The MedFlux project was devised to determine and model relationships between organic matter and mineral ballasts of sinking particulate matter in the ocean. Specifically we investigated the ballast ratio hypothesis, tested various commonly used sampling and modeling techniques, and developed new technologies that would allow better characterization of particle biogeochemistry. Here we describe the rationale for the project, the biogeochemical provenance of the DYFAMED site, the international support structure, and highlights from the papers published here. Additional MedFlux papers can be accessed at the MedFlux web site (http://msrc.sunysb.edu/MedFlux/).