1983年菏泽5.9级地震前后沂水泉氡的变化

沂水泉位于山东省沂水一汤头断裂带上。多年来的观测分析表明,影响沂水泉氡值变化的最大干扰是降雨。由于这种干扰存在着“记忆”滞后影响,所以用一般的相关分析难以将这种影响排除干净。本文对最小二乘法为建立模型的判据,用动态灰箱分析法拟合并推估观测系统的变化。在分析中用了四个状态变量：长趋势成分Ｌ（ｔ）、年周期变化成分Ｐ（ｔ）、降雨影响部分Ｒ（ｔ）和随机变化部分Ｓ（ｔ）。经过分析表明,沂水泉氡的长趋势部分１     

新疆地震预报研究

新疆的地震预报是1970年开始的。二十多年来在“边观测、边研究、边预报”、“多路探索、多兵种联合作战”、“走综合预报之路”的方针指导下取得了长足的进展。建设了43个地震台站,投入189套仪器,建成了遍布全疆的地震无线通讯网,开展了历史地震调查和地震烈度区划工作,建立健全了地震会商预报制度,进行了多方面的地震预报研究。实际地震预报统计分析表明,扣除自然发震概率之后,趋势预报的成功率约0.3,短临预报的成功率约0.1。在前兆台网控制范围内取得了一些震例,说明地震确实是有前兆的,但又是非常复杂的。地震预报作为科学难题还有漫长的路要走。作者简要地讨论了地震观测的间接性和地震异常的离散性、难以区别的地震异常和地壳变动异常、建立在复杂现象基础上的地震前兆以及地震的混沌性对地震预报的影响等科学问题。     

重要找矿指示元素的野外快速分析法——金的野外快速分析

近年来,作者发展了七种以上重要找矿指示元素的野外快速分析法,此乃其一。文中提出一种新的金样冷浸技术,引进了新的光导光度检测方法,样品经溴化钠—硫酸—过氧化氢冷浸,用经丙酮—MIBK处理的泡沫塑料富集金,经混合解脱剂解脱并直接取解脱液用改进的微珠析出法或用光导光度法测定。取10g样品,可测定0.0005-50g/t范围内的金。方法简便、快速,可在普查分队驻地进行,每一工作日可测定80多个样品,由于废弃了王水分解样品和泡沫塑料的灰化,具有广阔的应用前景。     

山东省日照市蓝色经济区工程建设适宜性评价

本文以山东省日照市蓝色经济区为研究区, 通过野外地质调查和室内综合分析, 选取场地稳定性、工程地质条件、地下水条件, 地形排水条件、地质灾害及其他因素6个一级评价因子, 构造活动、场地土类型、建筑场地类别等13个二级评价因子, 利用专家-层次分析定权法进行区内工程建设适宜性评价, 得到了相应工程建设评价分区图。评价结果表明, 日照市场地工程建设适宜性总体较好, 大部分地区适宜进行高层建筑工程建设, 占84.50%; 地下空间开发利用条件优越, 全区多数地区属于城市地下空间建设适宜区, 适宜性差及不适宜区主要分布在付疃河两岸附近和海岸附近、大型高速公路和铁路沿线一带区域及城区; 轨道交通建设适宜性良好, 小部分不适宜区主要集中在付疃河下游夹仓和小古镇一带及其沿海地区。评价结果可有效地服务于该地区规划布局、建设发展和工程选址, 具有重要的理论和实践指导意义。     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

A Step Towards Evaluation of the Seismic Response Reduction Factor in Multistorey Reinforced Concrete Frames

A seismic nonlinear time-history analysis was made for four-, six-, and eight-storey reinforced concrete buildings. These buildings were made as three-dimensional space frame structures with shear walls in both orthogonal directions. They have five bays with 4.8 m spacing each in the horizontal direction, and three bays with 4.2 m spacing each in the transversal direction. The frames were designed according to the Jordanian Seismic Code of practice for Seismic Zones 4, 3, 2, and 1 as proposed for Jordan by several authors. Time-history analysis was made using the El Centro (N-S) earthquake record of May 1940 as an actual earthquake excitation. The response reduction factor (R) that primarily consists of two factors that are the ductility reduction (Rµ) and the overstrength (), is obtained. It has been seen that the seismic zoning has a slight effect on the ductility reduction factor for different buildings, since it ranges from Zone 4 to Zone 1 as 2.37 to 2.52, 1.72 to 1.78, and 1.14 to 1.18 for four-, six-, and eight-storey buildings, respectively. Moreover, it is observed that, for different buildings and different seismic zones, the ductility reduction factor (Rµ) is slightly different from the system ductility factor (µ) especially for higher values of µ (i.e., Rµ µ). The response reduction factor, called overstrength (), was evaluated. The overstrength factor was found to vary with seismic zones (Z) , number of stories, and design gravity loads. However, the dependency on seismic zones was the strongest. The average overstrength of these buildings in Zones 4 and 1 was 2.61 and 6.94, respectively. The overstrength increased as the number of storeys decreased: overstrength of a four-storey building was higher than an eight-storey building by 36% in Zone 4, and 39% in Zone 1. Furthermore, buildings of the three heights had an average overstrength 165.9% higher in Zone 1 than in Zone 4. These observations have a significant implications for the seismic design codes which currently do not take into account the variation of the response reduction factor, R (i.e., ductility reduction factor times overstrength).     

地震短临综合预报方法的研究

本文在《中国震例》资料基础上,详细分析了华北地区１７次中强以上地震前的短临异常,得到华北地区中强以上地震短临异常的三个综合特征,在归纳出短临异常综合特征的基础上,提出了两个判定孕震过程、前兆异常由中期向短期过渡的定量的综合标志。据中期异常的追踪分析和短临异常综合分析相结合的原则,定义并计算了综合预报指标Ｓ值,以此值作为是否发生中强以上地震的判据。本文的重点是在分析短临异常综合特征的基础上,结合实用     

合肥遥测台网地震速报系统

论述了适用于遥测地震台网大震速报的一套计算机处理系统,系统设计以《全国遥测台网观测技术规范》和《近震分析》理论为依据,实现了数据输入,震相选择,数据处理,地震定位,震级计算,结果输出及贮存等多项功能,达到了快速确定地震三要素,提高速报速度和精度之目的,是一个较完善的,实用的速报系统。     

Possible creep-related tilt precursors obtained in the Central Apennines (Italy) and in the Southern Caucasus (Georgia)

Daily averaged tilt component data from two sites of the Central Apennines (Italy) and of the Southern Caucasus (Georgia), respectively, revealed intermediate-term tilts as possible precursors to earthquakes (M=3.0÷4.7) which occurred in the above-mentioned seismic areas within a distance of 50 km from the sites. A good temporal correlation as well as a fair spatial correspondence between these residual tilts (with amplitude and duration of some microradians and months, respectively) and main shocks were pointed out, by removing both secular trends and seasonal thermoelastic effects from the raw tilts. An attempt was made to justify the above-mentioned results, based on the assumption that the observed intermediate-term preseismic tilts are the manifestation of aseismic creep episodes of comparable duration in the fault materials of thrust faults close to the tilt sites. The mechanism refers to a strain field slowly propagating from the preparation focal area to the tilt site, through crustal blocks separated by weak transition zones. This propagation is thought to be the cause of the local aseismic fault slip recorded by the tiltmeters. Previously, both discrete structures and strain propagation effects were revealed in the Central Apennines and are thought also to exist in the Southern Caucasus. As in the past, the rheological properties of fault materials are revealed as viscoelastic ones. In fact, creep equations obtained by applying several viscoelastic models on our data, proved to fit quite well some of the observed tilt precursors, producing viscosity and rigidity values very similar to those reported in literature.Professor Petr Viktorovich Manjgaladze died during the writing of this paper     

Numerical analysis of the symmetric methods

Aimed at the initial value problem of the particular second-order ordinary differential equations,y =f(x, y), the symmetric methods (Quinlan and Tremaine, 1990) and our methods (Xu and Zhang, 1994) have been compared in detail by integrating the artificial earth satellite orbits in this paper. In the end, we point out clearly that the integral accuracy of numerical integration of the satellite orbits by applying our methods is obviously higher than that by applying the same order formula of the symmetric methods when the integration time-interval is not greater than 12000 periods.