Ultimate strength of ship hulls under torsion

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.     

辽东湾地区下第三系地震速度—岩性预测模型研究

地震速度－岩性预测模型由四个子模型组成：即（１）砂泥岩压实模型；（２）地震层速度转换模型；（３）速度校正模型；（４）砂岩指数转换模型。辽东湾地区的实际资料证明，上述四个子模型不但决定了岩性预测的具体方法，而且严格控制岩性预测的精度。     

长江口区风浪要素计算的探讨

本文以长江口区波浪实测资料为依据，对目前国内外常用的风浪要素计算方法进行了比较分析，认为就目前资料条件下，最适用于长江口区的、能满足工程设计等要求的风浪要素计算方法为莆田试验站方法（莆田公式）。     

海洋中液-固界面作用的分形研究Ⅰ.SAXS法测量固体交换剂的分维

本文将分形作为一个新概念,应用到海洋化学的液-固界面作用的一系列的研究上。根据用SAXS法测定一些常见的粘土矿物(高岭石,蒙脱石)和水合氧化物(水锰矿、δ-MnO_2、氧化铁凝胶、针铁矿、无定形氧化铁)的分维结果,可将这些结果划分成三类:(1)小尺度模量下具有表面分形;大尺度模量下具有质量分形。(2)只有一种分维值的表面分形。(3)在小尺度模量下和大尺度模量下分别具有不同分维值的表面分形。     

A polar method for obtaining wave resonating quadruplets in finite depths

A polar method for obtaining wave resonating quadruplets {K₁, K₂, K₃, K₄} in the computation of nonlinear wave–wave interaction source term of the wave model is presented with results for both deep and finite water depths. The method first determines the end radial points of the locus equation for K₂, for each set of input wave vectors (K₁, K₃) on the symmetry. The locus of K₂ (and hence K₄) is then traced in the anti-clockwise direction starting with the maximum radial point on the line of symmetry. It is shown that when k₃>k₁, the number of points on the locus varies when the orientations of the input wave vectors are changed and reduces when the difference in the magnitude of the input wave vectors is increased. A significant advantage in this method is that the angular increment on the locus for K₂ can be kept constant.     

黄渤海底层盐度预报方法的研究

根据二维流体动力学方程和深度平均盐度扩散方程在河口径流量以及蒸发和降水之差为已知情况下构成的闭合方程组,预报出深度平均盐度,然后利用底层盐度与深度平均盐度、水深和时间(月)之间的经验关系,给出底层盐度的二维预报。为了检验试报结果的可靠性,文中将黄渤海底层盐度的试报结果(1979年7月11日,时效为3d)与标准断面观测资料(7月4—14日观测,124.5°E以西,共104站)作一粗略比较。比较表明,试报结果与实测值的相关系数为0.96,均方误差为α=0.26,绝对误差小于0.2和0.3的站数分别占总站数的63.5％和77.0％,而总均绝差为0.19。由此可见,试报的效果是令人满意的。     

Air-Sea Gas Transfer Velocity in Stormy Winter Estimated from Radon Deficiency

Thirteen vertical profiles of ²²⁶Ra and ²²²Rn in the near-surface water were obtained in the western North Pacific in winter, and the gas transfer velocities across the air-sea interface were estimated. The transfer velocities found by applying a steady state model varied widely from 2.1 to 30.2 m day⁻¹ with a mean of 9.4 m day⁻¹. The mean value is almost 5 times higher than that in summer in other oceans, and the maximum value is a record high for world oceans. This is partly due to the inadequacy of the steady state model, which overestimates when stronger winds blow in more recent days than the ²²²Rn half-life of about 4 days. In fact, a strong low pressure zone passed through the station about 2 days earlier, which was one of the low pressure zones that with a period of develop once a week or so in the northwestern North Pacific in winter. Instead of steady-state removal, if half of the radon removal occurred sporadically every 7 days, and the last removal took place two days before the observation, the transfer velocity would be 26 m day⁻¹. Our mean transfer velocity, which is less than 20% different from the steady state value including both overestimated and underestimated values, 9.4 ± 4.8 m day⁻¹, seems to represent the mean state of this region in winter. This suggests that the gas exchange fluxes under extremely rough conditions in the open ocean are larger than those estimated by using a transfer velocity equation with a linear or quadratic relationship with wind speed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Kuroshio extension variability explored through assimilation of TOPEX/POSEIDON altimeter data into a quasi-geostrophic model

Mesoscale features in the eastward extension of the Kuroshio were investigated using assimilation of TOPEX/POSEIDON (T/P) data into a three-layer quasi-geostrophic model. The T/P data exhibited an elongated state of the southern recirculation gyre in 1993–95 and 1997, between whose two periods the gyre had a contracted state in 1995–96. A few stationary eddies were located in the southern gyre during the contracted state. The baroclinic instability, which was indicated by the phase shift from the uppermost-to the lowest-layer anomalies toward the downstream side, was evident near the Kuroshio Extension (KE) path. Since the instability never appeared in the artificial model without bottom topography, the topographic barrier for the eastward flow in the lowest layer was a necessary condition for the instability. The instability synchronized with the transition in the western region of the KE axis from the elongated to the contracted states. This evolution was interpreted as if the baroclinic instability played some part in the KE states and was a trigger for the transition from the elongated to the contracted states.     

An Application of Direct Ritz Method for Random Seismic Responses of Jacket Platforms

1 .IntroductionNowadays tremendous efforts have been devotedtothe analysis of randomseismic responses .Forexample ,American PetroleumInstitute (API) has declared that the analysis of randomseismic re-sponsesis a useful tool for safety inspection. Owing to the complexity of platformand randomness ofload,it is difficult to carry out the randomresponse analysis of a jacket platform. The conventionalrandomvibration methods ,such as square root of the sumof squares (SRSS) and complete quadratic…