不同云天条件下水汽含量特征及其变化分析

大气中水汽含量的探测，是人工影响天气的基础条件之一，我们利用2002年6月18日到28日期问，安徽屯溪站的GPS水汽监测数据分析了该站出现不同云天条件下的水汽含量的特征，提出了适合人工影响天气作业的云天条件。以及分析该时段内水汽含量时间变化序列，发现发生降水前，水汽含量会有一个跃变，一般会达到60mm以上，这是实施人工增雨作业的最佳时问。     

The Effect of Stage on Flow and Components of the Local Force Balance

Flow fields and water and bed surface topography were measured at two different stages as flow shoals over a submerged mid-channel bar in a straight reach downstream of a bend in Solfatara Creek, Wyoming. The data allow calculation and comparison of the magnitude of the component terms in the downstream and cross-stream force balance at the different stages. At the lower stage, corresponding to a discharge that is 30 per cent of the bankfull discharge, the convective acceleration terms in the equations describing the force balance are important, particularly the terms associated with the cross-stream transport of momentum. These terms are large because of the large accelerations and cross-stream flow forced by the shallow flow over the bar. At the higher stage, corresponding to a discharge that is 45 per cent of the bankfull discharge, flow is more directly downstream and cross-stream velocity is generally less in most of the channel. Downstream flow velocities at the higher stage are larger, but the acceleration is more gradual. Consequently, the convective accelerations at the higher stage tend to be less important than at the lower stage. Results from the two different stages suggest that some of the difference in conclusions reached by various workers on the significance of the various terms in the governing equations may be associated with the relative depth of flow. © 1997 John Wiley & Sons, Ltd.     

钢筋混凝土短肢剪力墙抗震性能试验研究

通过6片1：2单层短肢墙试体的低周反复荷戴试验,研究了在低周反复荷载作用下钢筋混凝土短肢剪力墙的整体工作性能、破坏形态及滞回特性。结果表明：试件的最终破坏均是由连梁失效引起的,连梁是短肢剪力墙结构的薄弱环节,因此,连梁的混凝土强度不应低于墙肢的混凝土强度,以免连梁出现粘结破坏;有翼墙的短肢剪力墙试体其延性系数都达到了3．5以上．其耗能能力较无翼墙短肢墙好。     

带暗支撑T形截面短肢剪力墙抗震性能试验研究

通过6个1：2缩尺的T形截面带暗支撑短肢剪力墙模型的低周反复荷载试验研究,分析比较了带暗支撑T形截面短肢剪力墙和普通T形截面短肢剪力墙的承载力、刚度及其衰减过程、延性、耗能、滞回特性及破坏特征。试验表明,加设钢筋混凝土暗支撑可显著提高T形截面短肢剪力墙的抗震性能。     

一座钢筋混凝土框架多层厂房楼面的减振加固

通过现场实测,根据实测结果分析了受动荷载作用的钢筋混凝土多层框架结构厂房楼面产生较大竖向振幅的原因,对其进行了结构加固设计,包括对楼面结构主梁、次梁、楼板及下一层柱子的加固处理,根据施工完毕后的实测结果分析,楼面竖向振动幅度大大降低,达到了减振的目的。     

反复荷载下混凝土框架柱塑性铰区基于延性的抗剪承载力机理分析

在试验研究的基础上,以框架结构延性设计为目的采用桁架＋拱模型研究了框架柱塑性铰区域抗剪受力机理,分析了,位移延性系数、加载循环次数等因素对框架柱构件塑性铰区域剪切受力性能的影响,并结合试验结果提出了混凝土框架柱塑性铰区域剪切承载力抗震延性设计实用公式,可有效实现结构的延性破坏机制。主要为配合GBJ10-89的修订,该成果已被《混凝土结构设计规范》（GB50010—2003）吸收。     

装配式钢筋混凝土结构竖缝抗剪承载力研究及国内外规范的比较

分析比较了国内外建筑规范及专家学者提出的关于装配式钢筋混凝土结构竖向齿槽接缝的抗剪机理及抗剪承载力计算公式,指出各种计算公式的可取与不足之处,提出了符合我国国情的设计公式,从而加速我国建筑规范的发展,促进我国规范与国际规范的接轨。     

"干中学"与产业集群核心能力的形成

本文构建了产业集群核心能力的分析框架,从理论上说明学习效应是产业集群发展的内生动力,产业集群的学习是一个“干中学”的过程.     

PERFORMANCE EVALUATION OF A THREE-STOREY UNREINFORCED MASONRY BUILDING DURING THE 1992 ERZİNCAN EARTHQUAKE

Seismic performance of a three-storey unreinforced masonry building which survived the 1992 Erzincan earthquake without damage is evaluated. Mechanical properties of the masonry walls have been determined experimentally by using identical brick and mortar used in construction. An accurate material model is developed for masonry and employed in a computer program for the non-linear dynamic analysis of masonry buildings. The analytical results based on measured material properties indicated that masonry buildings which satisfy basic seismic code requirements possess remarkable lateral strength, stiffness and energy dissipation capacity. Accordingly, a simple elastic design approach is rendered suitable for unreinforced masonry under seismic excitations, provided that realistic material properties are employed in design.     

Mechanism for the instability of slopes composed of granular materials

The mechanism of instability of slopes composed of granular materials was examined through a tilting-box experiment using an assembly of aluminium rods and direct shear tests. A detailed observation of the experiment and the simple physical model led to the following conclusion. Avalanching of granular materials is triggered by rotation of rods at the slope surface. The force inducing the rotation was caused by the weight of the particles transmitted through contact points. Therefore, the mechanism of avalanching of granular materials was not comparable to the shear mechanism that has been considered to be responsible for the instability of slopes made of granular materials. © 1997 by John Wiley & Sons, Ltd.