节理峰值后归一化位移软化模型

切向荷载作用下贯通节理岩体峰值强度后的剪切应力、位移变形规律一般呈双曲线形式发展,即峰值后强度衰减速率逐步变小而趋于0,到达残余强度。直剪试验表明,非贯通节理岩体峰值后剪切应力、位移呈“S”型趋势发展,即强度衰减速率先是逐步增大,到达一定程度后逐步减少,最后趋于稳定达到残余强度值。贯通节理岩体峰值强度后的本构关系并不适合于描述该特征。提出一个新的非线性归一化位移软化本构模型,通过归一化剪切应力R与归一化剪切位移D的指数函数关系体现峰值后剪切应力、位移的发展趋势,即模型采用无量纲表达式。归一化剪切应力R是峰值后强度降? p-? 与峰值强度、残余强度差值? p-? r的比值;归一化位移D是峰值后剪切位移、峰值位移差值? -? p与残余位移、峰值位移差值? r -? p的比值。对含不同起伏角的非贯通节理岩体在常法向荷载条件下的直剪试验数据进行拟合分析,模型预测结果与实测值具有相当高的吻合度,验证了模型的正确性     

JGN型耐高温建筑结构胶抗震加固性能研究

为有效增强建筑结构的抗震性能、提高建筑抗震水平,对JGN型耐高温建筑结构胶抗震加固性能展开研究。将高活性酚醛胺(T－31)作为主固化剂、聚酰胺树脂(PA)为辅助固化剂,结合气相白炭黑、超细石英砂、石棉纤维、纳米材料、环氧树脂等材料,制备JGN型耐高温建筑结构胶。在高温环境下,使用万能试验机分析不同配比条件对结构胶抗震加固性能的影响。测试主要以拉伸强度、压缩强度以及压缩弹性模量为指标。测试结果表明：当固化剂质量比为45∶15、气相白炭黑掺量为4.5%、超细石英砂掺量为10%、石棉纤维掺量为10.5%、纳米SiO₂掺量为3.5%、纳米CaCO₃掺量为2.5%时,JGN型耐高温建筑结构胶的拉伸强度和压缩强度更大,压缩弹性模量得到优化,结构胶的抗震加固性能达到最佳状态。     

Corrected Formula of Bed Resistance Coefficient for Plane Numerical Simulation of Tidal Current

By means of a logarithm law for the velocity profile,a corrected formula of bed resistancecoefficient,which involves many factors such as gradient of still water depth,variation of surfaceelevation,flow direction,and so on,is derived from the 3D governing equations of tidal current by aver-aging over the whole water depth.Theoretical analysis and application have shown that the 2D plane tidalcurrent numerical model would be more reasonable and could be applied to steep bottom topographywhen the corrected bed resistance coefficient is used,therefore the results of reproduction simulation andengineering calculation would be more scientific and reasonable.     

堆内构件检测ROV设计与实现

根据核堆内构件检测的需求,设计研发了一款超小型无人遥控潜水器(ROV)。从总体、结构、电控等方面,论述了该潜水器面临的问题和设计特点。着重论述了核环境下系统器件材料的耐辐照要求,并对关键器件进行了耐辐照性试验,结果表明所选器件能够满足辐照环境下的应用要求。最后给出了系统的水池实验结果,证明该系统具有良好的操纵性和稳定性。     

Measurement and modeling of bed shear stress under solitary waves

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.     

Diet restriction induced autophagy: a lysosomal protective system against oxidative- and pollutant-stress and cell injury

Nutrient deprivation or dietary restriction (DR) confers protection against ageing and stress in many animals and induced lysosomal autophagy is part of this mechanism. The effects of dietary restriction on the toxicity of copper and the polycyclic aromatic hydrocarbon phenanthrene have been investigated in the common marine mussel Mytilus edulis. The findings show that DR-induced autophagy facilitates the recovery of the digestive gland (i.e., molluscan liver analogue) from cell injury caused by both copper and phenanthrene. It is inferred that DR-induced autophagy and lysosomal proteolysis results in improved cellular "housekeeping" through the more efficient removal of oxidatively and pollutant damaged proteins (e.g., protein carbonyls, protein adducts, etc.) and that this contributes to stress resistance.     

A Note on Soil Structure Resistance of Natural Marine Deposits

It has been well documented that natural normally-consolidated marine soils are generally subjected to the effects of soil structure. The interpretation of the resistance of soil structure is an important issue in the theory study and engineering practice of ocean engineering and geotechnical engineering. It is traditionally considered that the resistance of soil structure gradually disappears with increasing stress level when the applied stress is beyond the consolidation yield stress. In this study, however, it is found that this traditional interpretation of the resistance of soil structure can not explain the strength behavior of natural marine deposits with a normally-consolidated stress history A new interpretation of the resistance of soil structure is proposed based on the strength behavior. In the preyield state, the undrained strength of natural marine deposits is composed of two components: one developed by the applied stress and the other developed by the resistance of soil structure. When the applied stress is beyond the consolidation yield stress, the strength behavior is independent of the resistance of soil structure.     

Fatal attraction: synthetic musk fragrances compromise multixenobiotic defense systems in mussels

We studied interactions of nitromusk compounds musk ketone and musk xylene and polycyclic musks Galaxolide trade mark (HHCB), Celestolide trade mark (ADBI), Tetralide trade mark (AHTN), and Traseolide trade mark (AITI) with multixenobiotic resistance (mxr) transporters in gill tissue of the marine mussel Mytilus californianus (Conrad, 1837). A competitive substrate transport test with rhodamine B was used to assay modulation of transport activity by musks. All tested musks inhibited the transport activity in the low microm range as indicated by increased accumulation of rhodamine B in the tissue. Compared to known substrates of mxr transporters, the effective concentration range was similar to quinidine and about 100 times higher than verapamil. Musk ketone and musk xylene also inhibited efflux of rhodamine B from gill tissue which was loaded with the dye and subsequently incubated with these compounds. Synthetic musk compounds are persistent environmental pollutants in aquatic environments with a high potential to bioaccumulate. As potent inhibitors of mxr transporters they may also play a role as chemosensitizers that enable toxic mxr substrates to accumulate in cells of aquatic organisms.     

Gradation affects basic mechanical characteristics of Chinese calcareous sand as airport subgrade of reefs

Abstract

Construction of the reefs in the South China Sea is a significant foundation to the secure stability and economic development of China. The construction of an airport runway is necessary for this realization. The calcareous sand is the main primary material in the runway construction. A certain type of calcareous sand near a certain reef of the South China Sea was studied in this paper. To investigate this specific calcareous sand, quartz sand was used as a reference for comparison. Microscopic 3-D imaging, compression and triaxial tests were conducted to test the micro, squeezing and shear properties. The effect mechanism of gradation on the calcareous sand’s compressibility and shear characteristics are discussed from a mesoscopic viewpoint using 3-D morphology. Calcareous sand particles are multiangular and flatter in comparison with quartz sand. The larger the particle sizes are, the more different the two sands’ morphologies are. The compressibility of calcareous sand is greater, and the effect of the coarse fraction (5–1?mm) content in the gradation plays the most significant role in this feature. When the coarse particles’ content is less than 25% and the mass ratio of the middle and fine particles (M) is constant, there is the worst coarse fraction content causing the calcareous sand to be most likely compressed. The worst coarse fraction content decreases with the increase in M, and an empirical formula is proposed. When the gradation, relative density and confining pressure are the same, the peak shear stress and strain of calcareous sand are all at a high level. The effect of confining pressure is manifested in calcareous sand. The shear strength and dilation of calcareous sand are also most affected by the medium coarse fraction (5–0.25?mm) content.     

黄河口快速沉积及其动力过程

现场观测资料和卫星遥感校准图像计算表明 ,185 5年以来 ,黄河三角洲新淤陆地 36 99km2 ,生长速率为 2 6 8km2 /a ,黄河输入三角洲 1× 10 8t泥沙形成 3 14 4km2 的陆地。进入河口区的泥沙约 88 4 %堆积在水下 8km宽的三角洲前缘。研究表明 ,这一堆积比例是河口切变锋、异重流和潮流场相互作用的结果 ,异重流在黄河汛期一直存在 ,大约搬运黄河来沙的 6 0 %沉积在三角洲前缘 ;一个潮周期内 ,切变锋出现两次 ,它能够捕获异轻羽状流中的悬浮泥沙堆积 ,也能够限制异重流的远距离扩散。切变锋消失后 ,少量悬浮泥沙才能远距离扩散 ,随潮流离开三角洲水下斜坡。