沉降量约束下的黄骅裂谷形成的地球的动力学模式

在计算覆盖整个黄晔裂谷２００口人工井（包括少部分探井）沉降量的基础上，总结本区二种基本沉降曲线模式。统计出热沉降（Ｓｔ）与初始沉降（Ｓｉ）之比为０．６，依此为约束条件与大陆岩石圈伸展的地球动力学正演模式进行对比，与简单剪切模式预测的热沉降与初始沉降之比值及几何效应更接近。进一步证实黄骅裂谷以简单剪切机制形成的地球动力学模式更合理，这与著名的以纯剪模式形成的北海伸展盆地不同     

造山带岩浆活动与构造运动关系研究综述

熔体及其活动在造山带的演化中发挥了重要作用。熔体活动发迹了地壳应力作用方式而诱发形成剪切带或断层；熔体活动调整块体间的位移而影响造山带的变形；     

高密度电法勘察岩土工程实例

利用岩土层间的导电性差异特性，使用由WDJD-1型主机与WDZJ-1多路电极转换器组成的高密度电法测量系统，按照不同的工程要求，采取不同的排列方式进行勘探，并用RES2DINV(演示版)高密度电阻率数据二维反演软件对所采集的数据处理解释，可实现对不同岩土层界面的划分。与常规电法相比，其方法手段更为先进，定性定量解释可靠，影像图件直观清晰。     

Development of joints and shear fractures in the Kuqa depression and its implication to regional stress field switching

The superimposed basin must have undergone the changes of regional stress field. Study on the nature and switch of regional stress field of superimposed basin is very useful to understanding its stress state and tectonic events during its formation and evolution. As sensitive markers of small stress changes, joint and shear fracture, characterized by consistency of orientation over wide area, can be used to reconstruct paleostress state and its evolution. Detailed observations and analysis on the orientations, geometrical patterns, sequences of joints and shear fractures and their chronological relation to faults and folds show that, the NEE-SWW systematic joints and NNW-SSE systematic joints developed in the Mesozoic and Cenozoic strata are much more prominent than NW-SE systematic joints and shear fractures with different orientations. And the NWW-SEE and NW-SE systematic joints formed later than NEE-SWW systematic joints but earlier than shear fractures with different orientations. According to the relationships between joint and shear fractures and stress, the NEE-SWW systematic joints are inferred to result from lateral weak extension caused by the late Cretaceous regional uplift, while the NNW-SSE and NW-SE systematic joints are interpreted as syn-tectonic deformation relating to strong N-S compression in the Neogene. But some conjugate shear fractures occur probably due to sinistral strike-slip faulting in the Kuqa depression. At the beginning of the Neogene, the stress field changed and the maximal principal stress σ1 switched from vertical to horizontal.     

Are open fractures necessarily aligned with maximum horizontal stress?

Fluid flow in fractured rock is an increasingly central issue in recovering water and hydrocarbon supplies and geothermal energy, in predicting flow of pollutants underground, in engineering structures, and in understanding large-scale crustal behaviour. Conventional wisdom assumes that fluids prefer to flow along fractures oriented parallel or nearly parallel to modern-day maximum horizontal compressive stress, or S_Hmax. The reasoning is that these fractures have the lowest normal stresses across them and therefore provide the least resistance to flow. For example, this view governs how geophysicists design and interpret seismic experiments to probe fracture fluid pathways in the deep subsurface. Contrary to these widely held views, here we use core, stress measurement, and fluid flow data to show that S_Hmax does not necessarily coincide with the direction of open natural fractures in the subsurface (>3 km depth). Consequently, in situ stress direction cannot be considered to predict or control the direction of maximum permeability in rock. Where effective stress is compressive and fractures are expected to be closed, chemical alteration dictates location of open conduits, either preserving or destroying fracture flow pathways no matter their orientation.     

Investigation of upper crust anisotropy in Ghaen-Birjand region, east-central Iran

IntroductionWhenpropagatingthroughananisotropicmedium,ashearwavesplitsintotwo(quasi)shearwaveswithdifferentpropagationspeedsandpolarizedorthogonally.Owingtotherecentdevel-opmentofseismicobservationsystem,detectionofshearwavessplittingwithverysmalldelaytimesbetweenfasterandslowershearwavesbecameavailableandprovidedpowerfulapproachfordetectionofcrustalanisotropy.Crampin(1978)emphasizedtheroleofalignedmicrocracksasacauseofcrustalanisotropyandpointedoutthatforverticallyalignedmicrocracksthedirecti…     

Period formulas of shear wall buildings with flexible bases

The evaluation of the fundamental period of shear wall buildings considering the flexibility of the base is investigated in this paper. This research is motivated by the discrepancy reported between the formulas used in different building codes and the measurement of real buildings. Both experimental and analytical approaches are used to assess the effect of the base flexibility on the fundamental period of shear wall structures. In total, twenty buildings built on different types of soil are tested under ambient vibration. The fundamental period is identified using a non‐parametric linear model in the frequency domain. The results show that fundamental period formulas used by UBC‐97 and NBCC‐95 are inadequate since they do not include the effect of the foundation stiffness. To improve the estimation of the fundamental period of shear wall buildings, an analytical approach is presented. The structure and the foundation are represented by a continuous‐discrete system. The stiffnesses of the base are represented by translational and rotational discrete springs. The rigidities of these springs are evaluated from the elastic uniform compression of the soil mass and the size of the foundation. The analytical predictions improve the estimation of the fundamental period and keep the computation simple. The error between the measured period and the analytical results is, on average, less than 10%. Copyright © 2003 John Wiley & Sons, Ltd.     

The seismic shear of ductile cantilever wall systems in multistorey structures

The distribution of seismic base shear demand among ductile flexural cantilever walls, comprising the lateral load resisting system of a multistorey building, is studied. It is shown that the base shear force demand depends on the sequence of hinge formation at the wall bases, and this in turn depends on the relative wall lengths. Hence, the routine elastic approach in which the shear forces are allocated per relative flexural rigidity or (when some consideration is given to plastic hinge formation) to moment capacity at the wall base, may appreciably underestimate the shear force demand on the walls, particularly the shorter (usually the more flexible) ones. A simple procedure yielding the results of ‘cyclic’ pushover analysis is proposed to predict the peak seismic wall forces for a given total base shear when plastification is confined to the wall base. The effects of plastic hinges developing at higher floors on (1) shear distribution among the walls and (2) the in‐plane floor forces are also considered. Two numerical examples are presented to demonstrate the main points made. Copyright © 2004 John Wiley & Sons, Ltd.     

~(40)Ar/~(39)Ar dating of shear deformation of the Xianshuihe fault zone in west Sichuan and its tectonic significance

TheNW-SEstrikingXianshuihefaultzoneslicesthesoutheasternTibetanPlateauandconnectssoutheastwardwiththeAnninghe-Zemuhe-Xiaojiangfaultzone,whichformahuge,activesinistralstrike-slipfaultzone(fig.1).ThisfaultzoneisanimportantseismicfaultineastTibet[1-5].EarthquakegeologystudiesandoffsetpatternsofyounggeologicalfeatureshaveshownthatlateQuaternarysinistralsliprateoftheXianshuihefaultzonereaches13mm/a[1,2].TheXianshuhefaultzoneconsistsoftwomainbranches,theDaofufaultbranchinthewestandtheXianshuih…     

晴空日中尺度切变环境场与对流云团发展条件

重点应用雷达回波资料结合常规气象资料、卫星云图 ,综合分析了 50 0hPa中尺度切变与陕北南部地区对流阵性降水形成、发展条件 ,指出了 50 0hPa不同的中尺度切变与有利的环境合理配置 ,是导致对流云团发展的重要因素 ,不同特征环境风切变配置与对流单体的发展趋势、强度变化、移动和合并息息相关。