Jurassic Dextral and Cretaceous Sinistral Movements Along the Hida Marginal Belt

The Hida marginal belt (HMB), which consists of various kinds of fault-bound blocks, is located between the continental massif of the Hida belt and the Mesozoic accretionary complex of the Mino belt in Central Japan. Detailed field investigation reveals that the HMB had grown through the two different movements, i.e., Jurassic dextral and Cretaceous sinistral movements. The Jurassic dextral ductile shear zones run in the southern marginal part of the Hida belt and the northern part of the HMB, whereas the Cretaceous sinistral cataclastic shear zones occur in the southern part of the HMB and the northern marginal part of the Mino belt. Geologic map and field evidence seem to suggest that the Jurassic dextral movement form the fault-bound blocks of the HMB to form the basic structure of the Hida marginal belt, i.e., formation of the ‘proto-HMB.’ Following the dextral movement, the sinistral one restructured the ‘proto-HMB’ to complete the present feature of the Hida marginal belt. The Cretaceous sinistral movement might result in the sinistral collision between the proto-HMB and the Mino belt.     

Contrasting metamorphic evolution of metasedimentary rocks from the Çine and Selimiye nappes in the Anatolide belt, western Turkey

Abstract P–T conditions, mineral isograds, the relation of the latter to foliation planes and kinematic indicators are used to elucidate the tectonic nature and evolution of a shear zone in an orogen exhumed from mid‐crustal depths in western Turkey. Furthermore, we discuss whether simple monometamorphic fabrics of rock units from different nappes result from one single orogeny or are related to different orogenies. Metasedimentary rocks from the Çine and Selimiye nappes at the southern rim of the Anatolide belt of western Turkey record different metamorphic evolutions. The Eocene Selimiye shear zone separates both nappes. Metasedimentary rocks from the Çine nappe underneath the Selimiye shear zone record maximum P–T conditions of about 7 kbar and >550 °C. Metasedimentary rocks from the overlying Selimiye nappe have maximum P–T conditions of 4 kbar and c. 525 °C near the base of the nappe. Kinematic indicators in both nappes are related to movement on the Selimiye shear zone and consistently show a top‐S shear sense. Metamorphic grade in the Selimiye nappe decreases structurally upwards as indicated by mineral isograds defining the garnet‐chlorite zone at the base, the chloritoid‐biotite zone and the biotite‐chlorite zone at the top of the nappe. The mineral isograds in the Selimiye nappe run parallel to the regional S_R foliation, parallel the Selimiye shear zone and indicate that the Selimiye shear zone formed during this prograde greenschist to lower amphibolite facies metamorphic event but remained active after the peak of metamorphism. ⁴⁰Ar/³⁹Ar mica ages and the tectonometamorphic relationship with the Eocene Cyclades–Menderes thrust, which occurs above the Selimiye nappe in the study area, suggests an Eocene age of metamorphism in the Selimiye nappe. Metasedimentary rocks of the Çine nappe 20–30 km north of the Selimiye shear zone record maximum P–T conditions of 8–11 kbar and 600–650 °C. An age of about 550 Ma is indicated for amphibolite facies metamorphism and associated top‐N shear in the orthogneiss of the Çine nappe. Our study shows that simple monophase tectonometamorphic fabrics do not always indicate a simple orogenic development of a nappe stack. Preservation in some areas and complete overprinting of those fabrics in other areas apparently occur very heterogeneously.     

岩体边坡工程中的位移监测及分析

边坡工程的监测取决于监测人员对岩(土)体介质的认识程度和选择相应的方法和手段。通过对江西德兴铜矿大山村选矿厂东部边坡和北部楔形地质结构体稳定状况的监测,阐述了在边坡工程中位移监测的应用及有关分析。     

新疆某水利枢纽工程软弱结构面抗剪强度参数的试验研究

某水利枢纽工程位于伊犁地区,影响工程的主要问题为坝基岩体软弱结构面和断层的抗滑稳定问题。根据工程实际条件和软弱夹层特性,采取现场断层软弱结构面试验和室内模拟试验相结合,获得软弱夹层的抗剪参数。实践证明,把两种方法结合起来的试验成果可靠,尤其对一些不具备进行现场大型岩体软弱夹层抗剪试验的工程,采用室内中型直剪仪进 行剪切试验具有实用意义。     

黄壁庄水库副坝塌坑Ⅳ76+1槽段安全监测

介绍了黄壁庄水库副坝塌坑Ⅳ76+1槽段进行的安全监测设计及根据此设计进行的安全监测实施,根据取得的监测资料解决了一直未能确定的主要变形地层的问题,为水库的加固施工和后期的运行安全提供了一定的依据。     

高层建筑深基坑支护施工技术

深圳某高层建筑原基坑已作支护,但一直废弃作鱼塘用。新的基坑支护采用土钉墙和树根桩施工,支护完成后监测结果较好,没有发生明显的位移和沉降。     

重塑非饱和粘土抗剪强度参数与饱和度的关系研究

土的饱和度是基于水分状态和密度状态的一个衍生变量。存在因应水分状态变化和因应密度状态变化的两类饱和度变化过程。根据23组不同水分状态和密度状态的UU三轴压缩试验结果,讨论了重塑非饱和粘性土抗剪强度参数与饱和度的关系。数据分析表明:粘聚力与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是准线性的。内摩擦角与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是弱非线性的。     

岩质边坡稳定性分析的探讨

通过最大剪应力等值线来确定边坡的滑动面,并与其结构面抗剪强度相比较,给出了确定边坡的稳定系数的方法。     

淮安市典型土动力特性的试验研究

通过对淮安市典型的全新世沉积粉土和粘性土进行室内自振柱试验及粉土的动三轴液化试验，把粉土和粘性土的自振柱试验结果与Seed和Idriss建议的砂土及饱和粘土的剪切模量比G／Gmax-γ曲线和阻尼比λ-γ曲线的变化范围进行对比，结果表明：粉土的剪模量比要比饱和粘土的大，而比砂土的剪模量比要小，其阻尼比接近于砂土的阻尼比；粘性土的剪模量比要比一般饱和粘土的大，而与砂土的剪模量比相近，其阻尼比要比砂土的略低；粉土的抗液化强度与液化振次之间的关系可以用指数函数来表示，其振动孔隙水压力的发展规律可以用反正弦三角函数拟合；粘粒含量是影响淮安市全新世沉积粉土抗液化强度的主要影响因素。