震后紧急供电的电力网络安全检测研究

当前震后紧急供电安全检测方法忽略了电网节点的三相电流不对称问题,未计算电力网络节点功率、支路电流及网损,导致电力网络进行节点连通安全检测准确率低。据此提出震后紧急供电的电力网络安全检测方法,根据连通度矩阵电力网络节点的工作参数,电力网络潮流计算不同节点的电压向量。利用快速耦合法优化牛顿拉夫逊法的计算速度,求出节点功率、支路电流及网损数值。以所构建的电力网络节点连通安全检测模型为基础,采用蒙特卡洛方法完成震后紧急供电的电力网络安全检测。经实验证明,所提方法可有效检测震后紧急供电的电力网络节点安全性,当震动加速度分别为0.05 gal、0.20 gal、0.80 gal时,实验对象连通安全检测结果分别为较高、中等和极低状态,与实际结果均一致,说明所提方法能准确检测电力网络节点连通的安全性。     

Variation in the vertical zonality of erodibility and critical shear stress of rill erosion in China's Hengduan Mountains

Soil erodibility is an essential parameter used in soil erosion prediction. This study selected the Liangshan town watershed to quantify variation in the vertical zonality of rill erodibility (k_r) in China's ecologically fragile Hengduan Mountains. Soil types comprised of yellow–brown (soil A), purple (soil B), and dry-red (soil C) in a descending order of occurrence from the summit to the valley, which roughly corresponds to the vertical climate zone (i.e. cool-high mountain, warm-low mountain, and dry-hot valley sections) of the study area. With elevation, vertical soil zonality varied in both soil organic matter (SOM) content and soil particle-size fractions. A series of rill erosion-based scour experiments were conducted, using water discharge rates of 100, 200, 300, 400, 500, and 600 mL min^-1. Additionally, detachment rates (Dr) were measured under three hydrological conditions (the drainage, saturation, and seepage treatments). Results show that both Dr and flow shear stress (Ʈ) values increased as discharge increased. As elevation increased, the k_r values decreased, while the vertical zonality of critical shear stress (Ʈ_c) values showed no obvious variation. The highest k_r values were observed during the seepage treatment, followed by the saturation treatment then drainage treatment, indicating that variation in vertical hydraulic gradients could significantly alter k_r values. This study also found that land-use types could also alter k_r and Ʈ_c values. Further research, however, is necessary to better quantify the effects of subsurface hydrological conditions and land-use types on k_r under different soil zonalities in China's Hengduan Mountains. © 2018 John Wiley & Sons, Ltd.     

Test and analysis of reinforced concrete (RC) precast shear wall assembled using steel shear key (SSK)

Reinforced concrete (RC) precast shear walls are extensively applied in practical engineering, owing to their fast construction speed. However, because of the transport conditions, RC precast shear walls have to be separated into small wall segments during the factory prefabrication procedure before being assembled on site. Typically, wet-type jointing methods are adopted to link the segments, which is time-consuming and results in unreliable post-pouring area strength. To overcome this problem, the novel scheme of the steel shear key (SSK) featuring steel shear panels and combined fillet and plug welding is proposed. Three RC precast shear wall specimens with different linking strength, termed as weakened SSK wall, standard SSK wall, and strengthened SSK wall, respectively, and an integrated shear wall specimen were designed. Quasi-static cyclic loading was applied to investigate the specimens' dynamic properties. The test results suggest the prefabricated wall segments equipped with SSKs showed reliable stiffness and bearing capacity and were improved in energy dissipation ability, compared with conventional shear walls. As the shear stiffness and number of equipped SSKs increased, the specimens exhibited higher strength, but their ductility and energy dissipation were slightly decreased. Most importantly, the standard SSK wall specimen could achieve satisfactory bearing capacity and deformability and is thus recommended for precast building structures. Finite element method (FEM) models were established to validate the test results, and parametric study analysis was conducted based on the coupling ratio of the SSK walls. Finally, an appropriate coupling ratio range is recommended for practical engineering applications.     

固结时间对软土动力特性影响的试验研究

固结试验是研究软土动力特性的重要环节,固结时间是影响软土动力特征参数的重要因素。围绕岩土工程及科研工作中对动三轴试验中固结时间影响规律的认识较为模糊的问题,拟对天津滨海软土开展动三轴平行试验,分别采用8h、12h、24h、48h进行固结,针对软土的最大动剪切模量G_max、最大阻尼比λ_max及动剪切模量比G_d/G_max和阻尼比λ随动剪切应变γ_d的变化规律,分析固结时间对软土动力特性参数的影响。试验结果表明:G_max、λ_max、G_d/G_max-γ_d曲线、λ-γ_d曲线受固结时间的影响较为显著。G_d/G_max-γ_d曲线随着固结时间的增加而减小。阻尼比试验结果表明动剪切应变存在明显的分界点,分界点以下,中长期固结时间所得阻尼比较大,而分界点以上,短期固结时间所得阻尼比较大。     

基于地脉动噪声的呼伦贝尔地区监测能力研究

基于地脉动噪声计算方法,以呼伦贝尔市地震台网8个台站连续波形资料为基础,对地震观测台网监测能力进行评估,同时开展台网优化和科学布局研究。通过累计的历史噪声数据,用来评估台站观测环境的变迁,及时掌握地震监测能力的变化。该成果将为地震速报、重点地震危险区震情跟踪、强震后现场应急提供科学参考。     

Equilibrium thallium isotope fractionation and its constraint on Earth’s late veneer

Equilibrium isotope fractionation of thallium(Tl) includes the traditional mass-dependent isotope fractionation effect and the nuclear volume effect(NVE). The NVE dominates the overall isotope fractionation, especially at high temperatures. Heavy Tl isotopes tend to be enriched in oxidized Tl^3+-bearing species. Our NVE fractionation results of oxidizing Tl^+ to Tl^3+ can explain the positive enrichments observed in ferromanganese sediments. Experimental results indicate that there could be0.2–0.3 e-unit fractionation between sulfides and silicates at 1650 ℃. It is consistent with our calculation results,which are in the range of 0.17–0.38 e-unit. Importantly,Tl’s concentration in the bulk silicate Earth(BSE) can be used to constrain the amount of materials delivered to Earth during the late veneer accretion stage. Because the Tl concentration in BSE is very low and its Tl isotope composition is similar with that of chondrites, suggesting either no Tl isotope fractionation occurred during numerous evaporation events, or the Tl in current BSE was totally delivered by late veneer. If it is the latter, the Tl-contentbased estimation could challenge the magnitude of late veneer which had been constrained by the amount of highly siderophile elements in BSE. Our results show that the lateaccreted mass is at least five-times larger than the previously suggested magnitude, i.e., 0.5 wt% of current Earth’s mass. The slightly lighter 205 Tl composition of BSE relative to chondrites is probable a sign of occurrence of Tlbearing sulfides, which probably were removed from the mantle in the last accretion stage of the Earth.     

铜川新区黄土与古土壤动剪切模量比和阻尼比的统计研究

利用铜川市地震小区划项目的大量典型土样动三轴试验结果,采用双曲线模型拟合得到了铜川新区黄土和古土壤在8个典型应变下的动剪切模量比和阻尼比值。根据不同沉积年代和不同土层深度2种方法对黄土、古土壤动剪切模量比和阻尼比随剪应变变化情况进行了统计和对比分析。研究发现:同一剪应变下,黄土、古土壤动剪切模量比随沉积年代和土层深度的增加而增加。二者对黄土动剪切模量比的影响较为显著。     

加筋土挡墙变形特性研究进展

从理论研究、模型试验、数值模拟和实地调查四方面评述了国内外加筋土挡墙变形特性的研究成果。理论研究方面分析并归纳了研究方法和挡墙变形计算公式;模型试验和数值模拟介绍了已有的静、动力模型试验成果和常用的数值模拟方法。实地调查介绍了现有调查结论及部分规范、标准规定的位移限值。通过4种方式的研究情况介绍,指出了当前加筋土挡墙变形特性研究中存在的一些不足,并进一步阐述了今后的研究方向。     

扩孔螺栓连接型消能梁段的力学模型及参数研究

当前国家对建筑结构的抗震性能和震后功能恢复能力提出了更高要求。基于短剪切型消能梁段的受剪屈服特性和剪切扩孔型螺栓连接的受剪滑移性能,提出一种新型扩孔螺栓连接型消能梁段,可有效增大消能梁段的延性和耗能能力并同时减小消能梁段的损伤,使带扩孔螺栓连接型消能梁段的新型Y形偏心支撑结构更好地适应当前要求。采用有限元方法详细分析扩孔螺栓连接型消能梁段的滞回性能、破坏模式和耗能机理,由此得到其骨架曲线和力学模型,并阐述其力学模型的影响参数,为相应偏心支撑结构的设计和分析提供理论依据。     

基于自相似河网结构的河网消退系数Cs计算方法研究

新安江模型河网汇流参数Cs对洪峰模拟影响较大,目前Cs的确定需依赖于大量的历史数据,因此Cs的确定成为无资料地区和资料匮乏区水文模型应用中亟需解决的棘手问题.本文基于参数的物理意义,通过自相似河网结构的假定,构建Cs与河网形态、流域下垫面特征的相关联系,提出基于河链蓄量方程的Cs估算方法,对半干旱、半湿润和湿润地区等不同水文气象分区的11个流域的Cs值进行推算并代入新安江模型中进行模拟,经比较发现,11个流域子流域Cs计算均值与新安江模型率定结果相近,说明该Cs计算方法是合理的.选取陈河、屯溪两个典型流域研究单元流域属性对Cs的影响,由结果可以看出Cs与流域面积、河链数、河宽呈正相关,与单元流域距离出口的远近呈负相关,这表明流域分块后各单元流域Cs值不一致,而新安江模型中采用相同Cs值对不同单元进行调节必然会造成汇流计算的误差.为进一步提高该方法在无资料地区的应用效果,将新安江模型汇流模块修改为每个单元使用对应的Cs计算值进行滞后演算,以陈河和屯溪流域为例采用新安江模型Cs率定值、Cs计算均值以及修改后新安江模型3种不同方案进行模拟比较,从模拟结果可以得出,修改后的模型具有明显优势,将模型参数与下垫面条件建立了联系,模型物理机制提高且参数的独立性增强,对于新安江模型在无资料地区的应用具有重要的指导意义.