西秦岭北缘新阳—元龙韧性剪切带中花岗质糜棱岩黑云母40Ar 39Ar年龄及地质意义

西秦岭北缘新阳-元龙大型韧性剪切带是分划西秦岭造山带与祁连造山带的区域主构造边界,通过对其物质组成和构造特征的研究,结合两侧不同(洋-陆)构造环境下各类地质体的研究成果,重点对剪切带内花岗质糜棱岩中黑云母单矿物进行了~(40)Ar-~(39)Ar定年研究.在新阳镇和元龙北剪切带中分别获得(347.95±2.17)Ma (MSWD＝1.89)和(351.70±1.72)Ma (MSWD＝0.80)的坪年龄,分析确定其应为黑云母的冷却年龄,表明变形时代应在早石炭世早期之前;反映了最晚在早石炭世早期,该剪切带已横切秦岭与祁连造山带并发生强烈的右行走滑构造拼贴作用.     

Cu–Fe Bearing Zinc Sulfide from Laloki Stratabound Massive Sulfide Deposit, Papua New Guinea: Chemical Characterization

Abstract: A strange, unidentified, Cu-Fe bearing zinc sulfide occurs in the Laloki massive sulfide deposit, Papua New Guinea. The mineral is optically uniform in texture but is chemically variable and zoned even within a single grain. Copper contents vary from 0.1 up to 8.85 wt%. Iron reaches 18.31 wt% at maximum and decreases as Cu increases. It is remarkable, however, that the total Fe+Cu remains essentially unchanged between roughly 18 and 20 wt%. Zn and S are least variable, giving 45.85–47.84 wt% and 33.48–34.58 wt%, respectively. Other trace elements such as Cd and Mn are in general less than 0.2 wt%. It is strongly suggested that the mineral in question constitutes a unique Fe-Cu substitutional solid solution series belonging essentially to the Zn–Fe–Cu–S system.
The ideal chemical formula of the solid solution series can well be presented as Zn₁₀(Fe, Cu)₅S₁₅ or Zn₂(Fe, Cu)S₃, where Fe is always greater than Cu. It is intriguing that chalcopyrite blebs are recognizable restrictively only in nearby portions of the Cu-rich end member with the ideal composition close to Zn₁₀Fe₃Cu₂S_15. It has been confirmed by vacuum-sealed heating experiments that this mineral is decomposed to produce chalcopyrite and Fe-bearing normal sphalerite at temperatures below 200C. This would provide another evidence for the existence of such distinct phase as suggested here.     

岩体变形模量的尺寸效应

岩土工程中,现场岩体的承压板试验和变形试验可看作是不同尺寸岩体的变形试验。在某工程的现场岩石力学试验中,对同一组试点的岩体先后进行了承压板变形试验和承载力试验,研究了岩体变形模量的尺寸效应,结果表明,岩体变形模量主要受岩体中的裂隙发育状况控制,当岩体质量较好时,可以由承载力试验曲线来确定岩体的变形特性,这一做法具有一举两得的效果。     

新疆东准双泉地区与韧-脆性剪切带有关的金矿成矿

[摘要]区域成矿背景分析表明,东准噶尔卡拉麦里地区韧-脆性剪切带形成于陆-陆碰撞体制, 在330 ~265Ma 期间,受挤压伸展体制转换影响,先后经历了韧、脆性构造变形。对与韧-脆性剪切带有 关的金矿石英流体包裹体研究发现,包裹体以气液相为主,均一温度集中在160 ~ 240益,成矿流体盐度 为3. 55 ~4. 5wt%NaCl。成矿流体的氢、氧同位素组成表明成矿流体的水为变质成因水。金属硫化物硫 同位素啄34 S 值为3. 54 ~10. 68译,显然属于混染硫。黄铁矿包裹体氦氩同位素3 He/ 4 He 值为0. 18 ~2. 18 Ra,属幔壳混源。成矿年代学研究表明,双泉金矿成矿时代及控矿构造脆性变形时间为(269依9) Ma ~ (260依4)Ma,金初始富集时间在310Ma 前后,并得到含矿花岗斑岩U-Pb 同位素年龄的支持,该事件在 东准地区均有同位素年龄记录,是区域性的构造岩浆成矿流体热事件。上述资料表明,金矿成矿过程、 成矿流体性质等在时间、空间上严格受韧-脆性剪切构造变形带控制。     

Numerical analysis on post-grouted drilled shafts: A case study at the Brazo River Bridge,TX

This paper investigates the effects of post-grouting on the behavior of drilled shafts using a case study carried out at the Brazo River, Texas. Commercial finite element software, PLAXIS, was used to quantify the improvement of the tip resistance and side shear resistance of post-grouted drilled shafts (PGDS). The input material parameters of PLAXIS were initially estimated using CPT sounding results, and then the parameters were updated by calibrating the numerical results against full-scale STATNAMIC load test results. Based on the numerical analysis, the authors concluded that (1) the increase in total resistance of PGDS resulted from soil improvement at the shaft tip, (2) the apparent increase in side shear resistance resulted from side shear reversal that occurred during post-grouting, and (3) the apparent increase in the tip resistance of PGDS may be caused by stress relief of the grout. In addition, two approaches to estimate the resistance of PGDS were compared against numerical results. In this case study, the Axial Capacity Multiplier (ACM) approach over-predicted the total resistance whereas the Tip Capacity Multiplier (TCM) approach reasonably predicted the increase in total resistance.     

海洋工程中桩基水平向承载力可靠指标的影响因素分析

桩基础水平向承载力的计算是海洋工程中桩基设计的重要组成部分。论文在搜集了大量平台建设资料的基础上,以现有的桩基水平向承载力的设计计算方法为依据,进行了水平向承载力的可靠度研究。对影响可靠指标的各个因素进行了灵敏度分析。     

Analysis of threshold and incipient conditions for sediment movement

Prediction of threshold conditions and incipient motion is the essential issue for the study of sediment transport. This work compares existing empirical threshold curves proposed for Shields diagram, a method based on the concept of probability of sediment movement, and an empirical method based on movability number. These methods are used to predict the incipient motion conditions for experimental runs taken from various studies. Most of the experimental data, used in this work, have not been used before in derivation of alternative formulations for Shields diagram and other methods. The empirical threshold curves based on the Shields entrainment function was the least successful at predicting the measured incipient motion conditions, while the use of the movability number gives good predictions of critical shear velocity compared with experimental data.     

Model tests on installation and extraction of suction caissons in dense sand

A series of model tests were performed on steel- and Perspex-made suction caissons in saturated dense marine sand to explore installation and extraction behaviors. The extractions of the caisson were conducted by applying monotonic loading or by pumping water into the caisson. Responses of suction caissons to pullout rates, aspect ratios, and extraction manners were examined. Test results show that a cone-shaped subsidence region occurs around the suction caisson during the suction-assisted installation. The pullout bearing capacity of the suction caisson in sand is dominated by the loading rate and the loading manner. For the suction caisson subjected to monotonic loading, the maximum bearing capacity is reached at the pullout rate of about 20.0?mm/s. The mobilized vertical displacement corresponding to the pullout capacity increases with increasing the pullout rate. The passive suction beneath the suction caisson lid reaches the maximum value when the pullout bearing capacity is mobilized. In addition, during the suction caisson extracted by pumping water into the caisson, the maximum pore water pressure in the caisson is obtained under the displacement of approximately 0.04 times the caisson diameter. The absolute values of the maximum pore water pressures for the suction caissons approximately equal those of the maximum vertical resistances at the monotonic pullout rate of 5 mm/s. When the vertical displacements of the suction caissons with the aspect ratio of 1.0 and 2.0 reach 0.92 and 1.77 times the caisson diameter, respectively, the seepage failure occurs around the caissons. Using a scaling method, the test results can be used to predict the time length required for the prototype suction caisson to be extracted from the seabed.     

伶仃洋河口泥沙絮凝特征及影响因素研究

泥沙絮凝对河口细颗粒泥沙运动过程起着极其重要的作用。本文通过LISST-100激光粒度仪等仪器实测伶仃洋河口2013年洪季悬浮泥沙絮凝体现场粒径及水动力、泥沙条件,结合实验室悬沙粒径分析,研究大小潮期间伶仃洋河口泥沙絮凝特征,探讨紊动剪切强度、含沙量、盐度分层及波浪等因素对伶仃洋河口泥沙絮凝的影响。结果表明:伶仃洋河口水体中现场粒径平均值为148.53 μm,大于实验室悬沙分散粒径36.74 μm,河口絮凝现象明显;沉速与有效密度、粒径呈正相关,絮团平均有效密度为153.49 kg/m3,平均沉速达1.13 mm/s;小潮时絮团平均粒径大于大潮,垂向上表底层絮团粒径小、中层大,中底层絮团沉速大于表层。伶仃洋河口水动力、泥沙条件是影响其泥沙絮凝的重要因素,低剪切强度（小于5 s-1）、低含沙量（小于50 mg/L）及高体积浓度有利于细颗粒泥沙之间的相互碰撞,促进絮凝作用;当剪切强度与颗粒间碰撞强度高于絮团所能承受的强度时,絮团易破碎分解成小絮团或更细的泥沙颗粒;伶仃洋河口盐度层化引起的泥沙捕获现象增大中层泥沙体积浓度,有利于中层絮凝体的发育;观测期相对较大的波浪增强水体紊动,增大了水体细颗粒泥沙的碰撞几率,表层絮团粒径随波高峰值的出现而增大。