基于振动台试验的移动通信节点机房蓄电池组地震易损性分析

关键移动通信设备的地震易损性是城市移动通信系统地震灾害预测的基础。本文以移动通信系统节点机房中常用的蓄电池组作为研究对象,通过振动台试验来研究蓄电池组的抗震性能,并获得其地震易损性。试验过程中,首先采用FEMA P695建议的方法从美国PEER强震数据库中遴选出对蓄电池组较为危险的地震动记录作为试验激励,随后逐步增大各条地震动记录的幅值,基于振动台进行增量动力分析。试验后根据蓄电池组的地震损伤特征,定义了其损伤指标和损伤水平,并基于振动台试验数据分析获得了典型蓄电池组的地震易损性曲线。     

Damage localization and quantification of earthquake excited RC-frames

In the paper a recently proposed method for damage localization and quantification of RC-structures from response measurements is tested on experimental data. The method investigated requires at least one response measurement along the structures and the ground surface acceleration. Further, the two lowest time-varying eigenfrequencies of the structure must be identified. The data considered are sampled from a series of three RC-frame model tests performed at the structural laboratory at Aalborg University, Denmark during the autumn of 1996. The frames in the test series were exposed to two or three series of ground motions of increasing magnitude. After each of these runs the damage state of the frame was examined and each storey of the frame were classified into one of the following six classifications: undamaged, cracked, lightly damaged, damaged, severely damaged or collapse. During each of the ground motion events the storey accelerations were measured by accelerometers. After application of the last earthquake sequence to the structure the frames were cut into pieces and each of the beams and columns was statically tested and damage assessment was performed using the obtained stiffnesses. The damage in the storeys determined by the suggested method was then compared to the damage classification from the visual inspection as well as the static tests. It was found that especially in the cases where the damage is concentrated in a certain area of the structure a very good damage assessment is obtained using the suggested method. © 1998 John Wiley & Sons, Ltd.     

Mass rig system for shaking table tests of slender columns

A new mass rig system is proposed to minimize the deficiencies in current shaking table testing setups. This is accomplished by placing the inertial mass on a convex path designed to impose P‐Delta demands on slender cantilever columns. The design and performance of the mass rig system, and the principles used in deriving the equations of motion and their analytical validation against results obtained from shaking table tests, are presented. Formulation of the governing equations of motion was based on Lagrangian mechanics and solved using an implicit linear acceleration method with an adaptive time step formulation. Friction developed in the sliding system was also incorporated in the equations of motion. Experimental results validated the accuracy in the derivation and solution of the equations of motion. Validated by analytical and experimental results, P‐Delta effects were found to increase the displacement demands on slender columns in the low‐frequency range of acceleration input, while in the high‐frequency range P‐Delta effects led to no increase and in some cases even a reduction in displacement demands. Copyright © 2015 John Wiley & Sons, Ltd.     

地震作用下堆积体边坡的坡面变形与失稳机制

地震作用下堆积体边坡的动力响应特性十分复杂,单一抗震安全系数不足以评价其动力稳定性。通过大型振动台试验,研究了连续多级地震荷载作用下,地震波的类型、卓越频率及峰值加速度对堆积体边坡坡面永久位移的影响,并初步分析其失稳机制。试验结果表明,相同峰值加速度下振动型地震波比冲击型地震波更容易产生坡面永久位移,地震波卓越频率对坡面永久位移也有重要影响;堆积体边坡在峰值加速度apeak=0.2g时开始有大颗粒石砾滚落,对应的坡面永久位移在apeak=0.2g～0.3g之间开始产生并显著增大,另外利用考虑坡面几何形态变化的改进Newmark法对坡顶的永久位移进行了估算。通过坡面永久位移评价堆积体边坡的动力稳定性有一定合理性。     

PHC管桩单桩振动台试验与数值模拟对比分析

利用振动台对PHC管桩进行单桩承台模型试验;同时将土体PHC管桩-上部结构视为共同工作整体,建立三维有限元模型,再以ABAQUS软件为计算平台,对单桩试验工况下的地震反应进行数值模拟计算,并将试验结果与数值模拟计算结果进行对比分析。结果表明：数值模拟和振动台模型试验基本吻合,两者得到的地震反应影响体现出相似的规律性,印证了模型试验的可靠性和数值模型的合理性。     

Structural modal parameter identification and damage diagnosis based on Hilbert-Huang transform

Traditional modal parameter identifi cation methods have many disadvantages,especially when used for processing nonlinear and non-stationary signals.In addition,they are usually not able to accurately identify the damping ratio and damage.In this study,methods based on the Hilbert-Huang transform(HHT) are investigated for structural modal parameter identifi cation and damage diagnosis.First,mirror extension and prediction via a radial basis function(RBF) neural network are used to restrain the troublesome end-effect issue in empirical mode decomposition(EMD),which is a crucial part of HHT.Then,the approaches based on HHT combined with other techniques,such as the random decrement technique(RDT),natural excitation technique(NExT) and stochastic subspace identifi cation(SSI),are proposed to identify modal parameters of structures.Furthermore,a damage diagnosis method based on the HHT is also proposed.Time-varying instantaneous frequency and instantaneous energy are used to identify the damage evolution of the structure.The relative amplitude of the Hilbert marginal spectrum is used to identify the damage location of the structure.Finally,acceleration records at gauge points from shaking table testing of a 12-story reinforced concrete frame model are taken to validate the proposed approaches.The results show that the proposed approaches based on HHT for modal parameter identifi cation and damage diagnosis are reliable and practical.     

Experimental validation of a signal-based approach for structural earthquake damage detection using fractal dimension of time frequency feature

This article extends a signal-based approach formerly proposed by the authors, which utilizes the fractal dimension of time frequency feature(FDTFF) of displacements, for earthquake damage detection of moment resist frame(MRF), and validates the approach with shaking table tests. The time frequency feature(TFF) of the relative displacement at measured story is defined as the real part of the coefficients of the analytical wavelet transform. The fractal dimension(FD) is to quantify the TFF within the fundamental frequency band using box counting method. It is verified that the FDTFFs at all stories of the linear MRF are identical with the help of static condensation method and modal superposition principle, while the FDTFFs at the stories with localized nonlinearities due to damage will be different from those at the stories without nonlinearities using the reverse-path methodology. By comparing the FDTFFs of displacements at measured stories in a structure, the damage-induced nonlinearity of the structure under strong ground motion can be detected and localized. Finally shaking table experiments on a 1:8 scale sixteen-story three-bay steel MRF with added frictional dampers, which generate local nonlinearities, are conducted to validate the approach.     

Discussion of paper ‘Simulation of floor response spectra in shake table experiments’ by G. Maddaloni,K. P. Ryu and A. M. Reinhorn,Earthquake Engineering and Structural Dynamics 2011; 40(6): 591‐604

Three main topics including the floor motion action mechanism, the test frame design, and the target spectrum simulation presented in the paper are discussed specifically. Floor motion action mechanism is critical in understanding the seismic performance of architectural nonstructural components. Seismic sensitiveness and earthquake response properties of the nonstructural components should be considered in the design of the test frame for the shaking table test. Target spectrum simulation is also a challenging job in the shaking table test, in which dynamic characteristics of the specimen, performance of the shaking table facilities, and the control techniques should be all considered. Copyright © 2011 John Wiley & Sons, Ltd.     

Fragility analysis of low‐rise masonry in‐filled reinforced concrete buildings by a coefficient‐based spectral acceleration method

This study presents a seismic fragility analysis of low‐rise masonry in‐filled (MI) reinforced concrete (RC) buildings using a proposed coefficient‐based spectral acceleration method. The coefficient‐based method, without requiring any complicated finite element analysis, is a simplified procedure for assessing the spectral acceleration demand (or capacity) of buildings subjected to earthquakes. This paper begins with a calibration of the proposed coefficient‐based method for low‐rise MI RC buildings using published experimental results obtained from shaking table tests. Spectral acceleration‐based fragility curves for low‐rise MI RC buildings under various inter‐story drift limits are then constructed using the calibrated coefficient‐based method. A comparison of the experimental and estimated results indicates that the simplified coefficient‐based method can provide good approximations of the spectral accelerations at peak loads of low‐rise MI RC buildings, if a proper set of drift‐related factors and initial fundamental periods of structures are used. Moreover, the fragility curves constructed using the coefficient‐based method can provide a satisfactory vulnerability evaluation for low‐rise MI RC buildings under a given performance level. Copyright © 2011 John Wiley & Sons, Ltd.     

地震分析软件震相走时表文件结构研究

通过对现有地震分析软件所配置的震相走时表文件的结构类型及优劣进行分析,将震相走时表分为4种组合结构并分析其实用性。在IASPEI91震相走时表文件结构的基础上进行修改、补充和完善,从而提出了一种安全性高、适用面广、灵活性强、能存储各种结构走时表的新型走时表文件结构。应用这种新型结构震相走时表,地震分析软件可以灵活配置不同的走时表,实现精细定位,并为数字化测震台网快速利用测震资料编制和应用高精度的区域震相走时表创造了条件,对于地球深部构造研究具有一定的促进意义。