Speciation analysis and significance of ecological geochemistry

Different species of one element have different activities, so it has different effects on environment and human health. To analyze qualitatively and quantitatively the speciation of a special element in sample, which is the important basis for appraising the toxicity and studying the rule of transfer and translation of elements. Since the 1970＇s, the scheme of sequential extraction has already been used at many laboratories both at home and abroard, to get the information about heavy metals＇ activity in polluted soils. Because this method has the experimental nature, many schemes of problem has taken place, the absence of consistency of these sequential extraction have been formed. Thus the complexity of the schemes, the lack of selectivity of reagent, the lack of quality control, the result mainly related to the extraction scheme used, and so on. In the face of these problems, the study of experimental methods of sequential extraction on three different soils, sediment in Dongting Lake, soil in Jiangsu Province and loess in Shanxi Province was made. Reference materials of heavy metal speciation following sequential extraction in soil and sediment had been developed. Nowadays two kinds of sequential extraction methods which are widely used are BCR （three steps） and improved Tessier methods （seven steps）. Based on three steps of BCR, water-soluble speciation and the residual speciation were increased in our research. BCR701 was determined eight times at different laboratories using BCR three steps. The results showed that determined data obtained eight times were identical to the standard value, and it is indicated that this method has good reproducibility. The stability and homogeneity experiments indicated that the preparation of three types of candidates accorded with our requirements. Eight laboratories had afforded the determined values of 12 heavy metal elements （Cu, Pb, Zn, Mn, Co, Ni, Cd, Cr, Mo, As, Sb, Hg, Se et al.） using BCR three steps. Also, these three candidates afforded the determined values by seven steps, and 12 laboratories had participated.     

Assessment of mercury mobility and bioavailability by fractionation method in sediments from coastal zone inundated by the 26 December 2004 tsunami in Thailand

The 26 December 2004 tsunami covered significant portion of a coastal zone with a blanket of potentially contaminated sediments. In this report are presented results on mercury concentrations in sediments deposited by the tsunami in a coastal zone of Thailand. Since the total mercury concentrations are insufficient to assess mercury mobility and bioavailability in sediment, its fractionation was applied. Sediments were sampled within 50 days after the event and analyzed by sequential extraction method. The procedure of sequential extraction involved five subsequent stages performed with solutions of chloroform, deionized water, 0.5 M HCl, 0.2 M NaOH, and aqua regia. The mean concentration of total mercury in sediments was 119 ± 50 ng g⁻¹ dry mass (range 66–230). The fractionation revealed that mercury is mainly bound to the least bioavailable sulphides 75 ± 6% (range 62–86), organomercury compounds 14 ± 7% (range 4–26), and humic matter 9 ± 7% (range 1–27). The lowest contributions bring fractions of water-soluble mercury 0.8 ± 1.0% (range 0.1–3.6) and acid soluble mercury 0.9 ± 0.5% (range 0.2–2.1). Although, the total mercury content is similar in a reference sample and in the tsunami sediments, the highly toxic organomercury fraction contribution is higher in the latter. The results were compared with chemical and sedimentological properties of the sediments but no significant correlations were obtained between them.     

Distribution of cadmium, chromium, copper, lead and zinc in marine sediments in Hong Kong waters

Partitioning of heavy metals (Cd, Cr, Cu, Pb, Zn) in marine sediments collected from various sites in Hong Kong waters were determined using sequential extraction method. Sediments from Kellette Bank, located in Victoria Harbour, had higher metal concentrations especially Cu and Zn than most other sites. Slightly over 20% of total Cu and Cr existed as readily available forms in Peng Chau and Kellette Bank. At most sampling sites, over 15% of the Cu existed as the exchangeable form indicating that Cu could be readily released into the aqueous phase from sediments. A significantly higher percentage of Pb and Zn was associated with the three non-residual fractions. Hence, there is a greater environmental concern for remobilization of Pb and Zn compared with Cr. The high amount of residual Cd (>50%) and the relatively lower Cd content indicate that little environmental concern is warranted for the remobilization of Cd. Distribution of metals in sediments collected from different depth at Kellette Bank shows that metal concentrations decreased with profile depth. The levels of Pb and Zn associated with the two readily available fractions increased sharply in the surface sediment. These metals represented the pollutants, which were introduced into the area in the mid-eighties through early nineties as a result of rapid economic and industrial development in the territory. As significant portions of these metals were bound to the readily available phases in the surface sediments, metal remobilization could be a concern. An erratum to this article can be found at     

基于广义Hough变换的不规则形状目标提取方法

提出了一种基于广义Hough变换的不规则形状目标的提取方法。该方法主要包括目标参数描述和目标提取两部分。实验表明，该方法精度好、效率高。     

超声与振荡提取沉积物中松散结合态磷的比较

用超声技术提取沉积物样品中松散结合态磷,并与振荡提取结果进行比较。结果表明,超声提取结果与振荡提取结果大致相当。超声提取耗时短,操作简单易行,测试结果精密度为3.8%(RSD,n=7),可以替代振荡方法提取沉积物中的松散结合态磷。     

条带开采煤柱稳定性的试验模拟与数值分析——以山东省济宁市太平煤矿为例

以山东省济宁市太平煤矿为例，采用煤柱模拟试验和数值分析手段，对薄基岩条带开采时所留设煤柱的应力应变状态、煤柱强度结构及煤柱长期稳定性进行了深入的分析与研究，揭示了煤柱稳定性及煤柱应力分布与条采尺寸、采出率、覆岩特征的相互关系，进行了条带煤柱的稳定性评价，为工程实践提供了理论依据。     

饱和烃经5à分子筛络合前后单体烃碳同位素分析对比研究

通过对自配标准样品(正构烷烃)进行5à分子筛吸附试验,测定了用5分子筛吸附法分离前后正构烷烃、异构烷烃和环烷烃碳同位素值,探讨试验前后碳同位素值的变化。尽管实验过程中样品经过85℃长时间加热回流及吸附样品的5à分子筛用氢氟酸酸化处理,但实验结果经仪器检测,证明该方法对正构烷烃碳同位素值影响因素不大。本文还介绍了原油和煤可溶有机质中饱和烃络合前后的单体烃碳同位素分析方法。并在前人工作的基础上,改进采用微型索氏抽提加热回流实验装置,既提高了样品的回收率,也减少了样品中轻组分的损失。     

Numerical evaluation of the damping‐solvent extraction method in the frequency domain

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.     

厚层覆盖区综合物化探方法找金试验研究——以广西兴安金石金矿为例

在兴安金石金矿外围 4号分散流异常区 ,通过地电化学提取金测量法 ,查明测区存在 5个走向规模小于 5 0 m的金异常区 ,W( Au) 最大值为 72 .4× 10 - 9,高出背景值十几倍 ,并藉综合土壤吸附汞测量 ,高精度磁测和激发极化法等多种物化探方法来确定这些异常区的地质、地球化学和地球物理特征 ,提出金矿成矿的有利部位在金的地电提取高异常区、高汞量异常区、高磁性异常区、低视电阻率异常区和中等视极化率异常区的“三高一低一中”的找矿模式。确定测区的北北东角 (右下角 )一带具备有利的金矿成矿条件     

断裂构造的遥感研究方法综述

断裂构造是一种基本的构造型式。断裂构造遥感研究是高新探测技术与地球科学的有机结合 ,是断裂构造常规研究方法的有益补充和向纵深拓展的必然趋势。该文从总体思路、具体内容、操作方法等各个不同角度系统地论述了断裂构造遥感研究的现状和发展趋势 ,并在断裂构造信息提取、光谱特征分析、空间结构分析 (包括分形分析 )等方面提出了一些观点。