华南二叠-三叠系的成因地层序列及古特提斯海重建

总结各类沉积盆地的沉积和地层格架，厘定出６类等时性地层界面和５个级别的成因地层单位，在分析地层界面性质和各类成因地层单位沉积构成的基础上，将华南二叠－三叠系划分为７个沉积幕、３个构造沉积幕和２个沉积盆地域、恢复了华南板块二叠－三叠纪的演化过程，论述了板块构造运动，海平面升降和源区侵蚀作用对各级成因地层单位的控制意义，证明了华南的古特提斯海经历了陆表海和伸展裂谷海两个演化阶段。     

京西黄庄—高丽营断层西段晚更新世末的一次粘滑性活动

本文根据新近大比例尺地质图和探槽开控的结果，认为断层西段（仅在芦井至晓幼营间）晚更新世以来仍有明显活动，这种活动以正段倾滑运动为主，但兼具右旋走滑分量；并且在距今约２．４－２．１万年期间有过一次粘滑性活动，其垂直错距为０．９１．０ｍ；该段断层潜在有发生６－６．５级地震的可能性。     

顾及起始数据误差影响时单位权中误差的估值

本文推导了在附有条件的间接平差和附有未知数的条件平差两种方法中,顾及起始数据误差影响时,计算单位权中误差估值(?)的公式,并以两个实例说明,平差时应该考虑起始数据误差对(?)的影响。     

Fault interaction and seismicity: Laboratory investigation and its seismotectonic interpretation

Systems of two parallel linear faults of the same length with the angle of inclination =45° were investigated under uniaxial linearly increasing load. Perspex plates were used as models. For each treated fault configuration the morphology of tensile cracks and the sequence of seismoacoustic events of shear and tensile origin were studied.It is shown that the seismic regime of a fault system is strongly influenced by the contact conditions on a fault plane; it is different in the faults with the aseismic contact, represented by open slits, and in the faults with the seismoactive contact, represented by filled slits, respectively.The experiments proved the dominating role of a fast shear displacement of the stick-slip type in the regime of seismic energy release of a fault system. The tensile crack generation seems to be only of little—if not negligible—importance. On the other hand, the existence of tensile cracks in a fault system can play an important role in the course of subsequent loading cycles because the stick-slip displacements can take place not only along the primary faults but also along the planes of tensile cracks.A comparison of some results of model experiments and the already published results of geological and seismological investigations indicated that the way of seismic energy relase on faults in nature and in the laboratory could be of the same character. Several analogies between the seismic regime of a fault model and of real seismic regions were found concerning the morphology of faults, off-fault fore- and aftershocks, and earthquake doublets, respectively.     

新疆库布苏金矿石英标型特征研究

重点研究了库布苏矿化带中石英脉与金矿化关系，对不同成矿阶段石英的化学成分，晶胞参，红外光谱，热发光，包裹体等进行了研究，总结了找矿矿物学标志。     

Rainfall-runoff forecasting methods,old and new

Here we review the main thrusts of rainfall-runoff modelling with an eye toward the advantageous use of the massive date sets being accumulated and the modern computers capable of dealing effectively with such sets.More than a tutorial, this study is aimed at providing a unifying structure for analyzing available techniques. The closing section draws attention to the existence of an alternative methodology.     

A FORTRAN Program for tabulating and naming amphibole analyses according to the International Mineralogical Association Scheme

Summary Amphibole analyses input to program AMPHTAB (optionally with H₂O, F, Cl, minor elements and one or both of Fe₂O₃, FeO), are output in conventional column tables, with formula units, complete IMA names, and extensive messages indicating the quality of each analysis. AMPHTAB accepts data-files ranging from a single amphibole analysis to (in principle) unlimited batched data-e.g., multiple analyses from each of numerous probe sections. Options are provided to reallocate total Fe in probe data between Fe³ and Fe², to allow for common analytical problems (e.g., low H₂O values), and to enable the number of oxygens in the formula unit to be either preset or assigned automatically. Results for 57 probe analyses are compared with an unpublished BASIC program, which uses a different Fe-reallocation method. Three-quarters of the IMA names resulting from the two programs are essentially identical, despite somewhat different estimated formula units. The remainder are borderline cases, where incidental changes in formula units effect disproportionate differences in name.

---

Ein FORTRAN-Programm zum tabellieren und benennen von amphibolanalysen entsprechend dem Schema der International Mineralogical Association

Zusammenfassung In das Programm eingegebene Amphibolanalysen (wahlweise mit H₂O, F, Cl, Spurenelementen und Fe₂O₃, und/oder FeO), werden in Form herkömmlicher Spaltentabellen mit den Formeleinheiten, vollständigen IMA-Namen und ausführlichen Bemerkungen bezüglich der Analysenqualität ausgegeben. Das AMPHTAB-Programm verarbeitet Datensätze von einer einzigen Amphibolanalyse bis zu (im Prinzip) unbegrenzten Datenblöcken; z. B. Mehrfachanalysen eines Probenabschnittes von mehreren. Es sind die Möglichkeiten vorgesehen, das Gesamteisen in einer Analyse in die Fe³ und Fe²-Anteile umzurechnen, allgemeine analytische Probleme (z. B. niedrige H₂O-Gehalte) zu lösen und die Anzahl der Sauerstoffatome in der Formeleinheit entweder vorzugeben oder automatisch setzen zu lassen. Die Resultate von 57 Mikrosonden-Analysen sind mit einem unveröffentlichten BASICProgramm, das eine andere Methode zur Aufteilung des Fe-Gehaltes benutzt, verglichen worden. Drei Viertel der von den beiden Programmen vorgeschlagenen Mineralnamen sind identisch, trotz einiger unterschiedlich berechneter Formeleinheiten. Die übrigen 25% sind Grenzfälle, bei denen zufällige Veränderungen in den Formeleinheiten unverhältnismäßige Unterschiede in der Benennung bewirkten.

     

城市规划管理信息数据库的设计与建立

以某市城市规划地理信息数据库的设计与建立为例,主要阐述了该数据库的功能设计,并通过入库处理,将分层数据导入到对应数据库中。根据数据库设计要求,按空间单元划分存储单元建立各个子数据库,或者将所有数据合并为一个存储单元建立无缝数据库。从而实现图形与属性数据库的建立。     

Seismic Hazard Analysis for the Bangalore Region

Indian peninsular shield, which was once considered to be seismically stable, is experiencing many earthquakes recently. As part of the national level microzonation programme, Department of Science and Technology, Govt. of India has initiated microzonation of greater Bangalore region. The seismic hazard analysis of Bangalore region is carried out as part of this project. The paper presents the determination of maximum credible earthquake (MCE) and generation of synthetic acceleration time history plot for the Bangalore region. MCE has been determined by considering the regional seismotectonic activity in about 350 km radius around Bangalore city. The seismotectonic map has been prepared by considering the faults, lineaments, shear zones in the area and historic earthquake events of more than 150 events. Shortest distance from the Bangalore to the different sources is measured and then peak ground acceleration (PGA) is calculated for the different source and moment magnitude. Maximum credible earthquake found in terms of moment magnitude is 5.1 with PGA value of 0.146 g at city centre with assuming the hypo central distance of 15.88 km from the focal point. Also, correlations for the fault length with historic earthquake in terms of moment magnitude, yields (taking the rupture fault length as 5% of the total fault length) a PGA value of 0.159 g. Acceleration time history (ground motion) and a response acceleration spectrum for the corresponding magnitude has been generated using synthetic earthquake model considering the regional seismotectonic parameters. The maximum spectral acceleration obtained is 0.332 g for predominant period of 0.06 s. The PGA value and synthetic earthquake ground motion data from the identified vulnerable source using seismotectonic map will be useful for the PGA mapping and microzonation of the area.     

A structural model for the seismicity of the Arudy (1980) epicentral area (Western Pyrenees, France)

The Western Pyrenees presents a diffuse and moderate ( M ≤ 5.7) instrumental seismicity. It nevertheless historically suffered from strong earthquakes (I = IX MSK). The seismic sources of these events are not yet clearly identified. We focus on the Arudy (1980) epicentral area ( M = 5.1) and propose here the reactivation of early Cretaceous normal faults of the Iberian margin as a potential source. The late Cretaceous inversion of this basin, first in a left-lateral strike-slip mode and then in a more frontal convergence, resulted in a pop-up geometry. This flower structure attests of the presence of a deep crustal discontinuity.
The present-day geodynamic arrangement suggests that this accident is reactivated in a right lateral mode. This reactivation leads to a strain partitioning between the deep discontinuity that accommodates the lateral component of the motion and shallow thrusts, rooted on this discontinuity. These thrusts accommodate the shortening component of the strain. The distribution of the instrumental seismicity fits well the structural model of the Arudy basin. Whatever the compressive regional context, the structural behaviour of the system explains too the extensive stress tensor determined for the Arudy crisis if we interpret it in terms of strain ellipsoid. Indeed numerical modelling has shown that this concomitant activity of strike-slip and thrust faulting results in an extensive component that can rise 50 per cent of the finite strain.
We identify too a 25–30 km long potential seismic source for the Arudy area. The size of the structure and its potential reactivation in a strike-slip mode suggest that a maximum earthquake magnitude of ∼6.5 could be expected. The extrapolation of this model at the scale of the Western Pyrenees allows to propose other potential sources for major regional historical earthquakes.