Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.     

利用三维地震在戈壁沙漠区解决复杂地质构造问题

在分析戈壁沙漠地区地球物理特征的基础上，针对性的提出了解决煤田地质构造问题的方法，包括三维地震野外施工方法的选取、施工因素的选择、资料处理手段；并以获得的实际地质成果证实三维地震在解决复杂地质构造问题的可行性。     

Seismic Hazards Assessment for Radioactive Waste Disposal Sites in Regions of Low Seismic Activity

A comparative tectonic quiescence and lack of earthquakes make the stable centres of continents attractive for siting long-term radioactive waste storage facilities. The low rates of deformation in such regions, however, make it difficult to characterize their long-term seismotectonic behaviour, leading to uncertain estimates for the very low probability hazard estimates required by society. In an attempt to overcome the deficiency of both contemporary seismicity and paleoseismic data in central Canada, we have used earthquake histories from regions with similar seismotectonic characteristics from around the world. Substituting space for time, we estimate a long-term rate per 10⁶ km² of 0.004 magnitude ≥6 earthquakes per annum, of which 33–100% might rupture to the surface.     

陆相油藏中砂泥岩互层时移地震遮掩效应及其对时移地震资料解释的影响

从差异波形特征的角度出发,分析时移地震差异波形特征与砂泥岩互层油藏中油层速度变化的关系。通过建立由5层地层组成的楔形地质模型,运用褶积公式及时移地震求差公式,得到泥岩速度为2 400 m/s和砂岩速度为2 700m/s条件下,互层中砂岩速度变化±150 m/s的时移地震响应。研究结果表明:砂泥岩互层的差异波形是一个多峰复合波,泥岩夹层的厚度是决定差异波形特征的一个主要因素,并且存在一个临界值,即四分之一主波长;如果泥岩夹层的厚度小于这一临界值,就会发生遮掩效应,即顶部油层的时移地震响应可以掩盖中、下部油层的时移地震响应。     

深层地震勘探激发井深探讨

深层地震勘探野外资料采集的关键是在保证原始资料一定信噪比的基础上,同时兼顾分辨率,激发井深是决定资料品质的重要因素之一。通过对虚反射滤波作用分析,提出了充分利用虚反射能量设计最佳激发井深,增强下传地震波能量的采集方法。理论分析和试验资料表明,在高速层下4～7m的最佳激发岩性深度是深层勘探的理想井深。     

用旅游图制作导航电子地图中的地图纠正

介绍了一种用三次插值样条对公开出版的旅游图进行纠正,制作汽车导航电子地图的方法,分析了其中存在的问题,提出了解决的办法。     

我国西部1∶5万地形图空白区地物解译研究——以西藏那曲其香错地区为例

我国西部部分地区1∶5万地形图数据尚未完成,给区域和国家经济发展带来极大不便。空间技术、计算机技术和信息技术的高速发展为遥感技术应用提供了技术支持,高分辨率影像获取能力的提高为大比例尺地物特征的提取提供了数据可能。本文采用SPOT5遥感影像,以1∶5万地形图图式标准为依据,进行青藏高原其香错地区地物判读,结果表明SPOT5能基本满足1∶5万地形图制图要求。为进一步提高判读结果,可采用多时相、多分辨率影像进行1∶5万地形图地物判读。     

一种实现依比例街区自动合并的算法

针对依比例街区的图形特征，介绍了一种实现街区自动合并的有效算法，即利用数学形态学和模式识别对栅格数据进行追踪，然后提取街区轮廓线，编辑后就得到最终合并的街区。     

Influence of Adoptment of Geocentric 3D Coordinate System on Chinese Existent Maps

If a geocentric 3D coordinate system is adopted in China to replace 2D non-geocentric coordinate system, the coordinates of the surface points will be changed accordingly. The influences on the current maps of China, especially the topographic maps, are discussed due to the replacement of the coordinate systems. Taking the replacement of Xi‘an 80 coordinate system by GRS80 for a numerical example, this paper analyzes the changes of latitude, longitude, Gauss plane coordinates of the surface points, as well as the orientation and the length changes between the points on the map, including the changes of map border lines and sheet corner points.     

1∶5万地图数据库的计算机综合缩编

针对国家空间数据基础设施建设的需求,讨论了实用化地图综合软件的开发与应用,从软件开发角度讨论了地图综合系统功能的层次化划分及在软件中的圈层式结构组织,地图综合操作环境的建立,综合规则的形式化表达,综合算子的设计与软件实现。结合1∶1万到1∶5万数字地图综合及更新的应用实例,提出了多尺度空间数据库建立的技术路线。