矿山工程裂隙破碎带的三维地震模式识别原理及应用效果

本文从时间域、频率域、三维空间域介绍了矿山工程裂隙破碎带主要的地震运动学、动力学属性参数,包括相对振幅、波峰相位时间、相似系数、主频带能量、三维空间时间梯度和相干系数等,提出了矿山工程裂隙破碎带三维地震属性的去噪平滑、归一化、相关分析、特征变换的处理方法以及裂隙破碎带的模式识别原理与方法,并用实例说明了该方法的应用效果。结果表明:模式识别法对于解释矿山工程的裂隙破碎带是有效的,并具有广阔的应用前景。     

现代抗震设计理论的发展过程

介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。     

结构设计地震作用效应影响因素及规律分析

基于现行《建筑抗震设计规范》（GB50011－2001），本文分析了现行抗震设计中影响结构设计地震作用效应的主要因素，以规则平面框架对例对新旧规范影响结构设计地震作用效应的因素进行了对比，给出了其间的重要变化和基本规律。     

大型双槽渡槽地震反应分析

为了得到比较精确的大型双槽渡槽结构的地震反应，根据渡槽结构复杂、影响动力因素较多等特点，采用8结点空间块体单元对渡槽槽身和槽墩进行有限元离散，分别用耦合自由度和多个弹簧单元分别模拟渡槽槽身横向拉杆、加劲肋和盆式橡胶支座，建立了大型双槽渡槽结构地层反应分析的有限元模型，计算了南水北调水利工程中的双洎河大型双槽渡槽的振动特性，并分别用反应谱法和时程分析法对该渡槽进行了地震反应分析，计算结果可为该渡槽的抗震设计提供参考。     

兰州数字遥测地震台网信号传输方式的设计

介绍了地震信号传输的常用方式及各自的优缺点，提出了数字遥测地震台网信号传输方式设计的总原则和基本原则。实际应用表明，兰州数字遥测地震台网信号传输方式的是符合要求的，提出的数字遥测地震台网信号传输方式的总原则和基本原则，对数字遥测地震台网建设有直接的借鉴作用。     

地震前兆仪器嵌入TCP/IP协议的初步试验

根据“十五”总体设计方案的要求，对TCP／IP协议在地震前兆仪器上的实现进行了试验，在有关设备上进行了程序开发，取得了预期的效果。     

安宁河-则木河-小江带强震趋势的预测依据和应用问题

分析了近年沿安宁河一则木河一小江断裂带和大凉山断裂带出现的突出地震活动性、跨断层地壳形变和宏、微观异常现象。根据这些异常依据分析了强震趋势及预测应用问题，并进行了有益的思考。     

岳阳及周边地区地震构造与地震活动性研究

陈述了岳阳市及周边地区的主要断裂带及其地震活动，归纳了发震部位。认为利用小震条带预报本区地震具有积极意义，并运用数理统计法预测了本区今后50及100年内的地震活动水平。     

Study of crustal structure with S—wave data from Maqen—Jingbian profile

2-D crustal velocity structure and vp/vs are obtained by processing and interpretation of S-wave data from Maqen-Jingbian deep seismic sounding(DSS)profile.The result shows that there exist obvious differences in 2-D S-wave velocity structure and vp/vs ratio structure along the profile.The S-wave velocities are low and vp/vs ration is high for the westem section of the profile and Haiyuan region,while they are normal for the middle and eastern sections.The changes in lithologic characters of two major anomalous zones are discussed according to lateral variation of S-wave velocity structure and vp/vs ratio structure.It is concluded that the development and occurrence of the Haiyuan strong earthquake is not only related to tectonic activities,but also to lithologic characters of the region.     

Statistical tests for regional seismic phase characterizations

In seismic analysis some assumptions are often made aboutthe data, e.g. stationarity and Gaussianity. This is not obvious for all realseismic data. Here, we use statistical tests for characterization of regionalseismic data. We apply tests for stationarity, symmetry, linearity, andtime-reversibility. In the analysis we use twelve regional seismic events inFennoscandia recorded with the seismic small-aperture arrays NORESS,ARCESS and FINESA at hypocentral distances in the range from 160 to1580 km. For the tests we use the regional phases Pn, secondary P, Sn and Lg-phases and the preceding noise. Two of the eventsare explosions, two are rockbursts and eight are earthquakes. Theperformance and possibilities of using statistical tests based on bispectra, asa complementary tool for conventional analysis of seismic phases isdemonstrated. The preceding noise recorded before the first onset of theP-wave for the twelve events is tested to be spatially stationarybetween each channel within each array and temporal stationary in 21consecutive time windows of 3.2 sec each. Also, the preceding noise issymmetric and linear. The seismic phases defined by the symmetry test asnon-Gaussian (not symmetric) are all linear. This means a linear model canbe used to characterize both the noise and the phases. The first P-phase for the two explosions is characterized as non-Gaussian at thethree arrays. For all 36 possibly first P-phase arrivals at the three arraystations, 23 are non-Gaussian. The second P-phase is non-Gaussian at13 of 36 data records, the S-phase at eleven of 36 and the Lg-phase at nine of 36. For all the four phases more than 32 of possible36 are time-reversible.