古冲沟冲积扇体地震反射资料研究

利用地震资料研究古冲沟冲积扇体的反射特征、内部结构、剖面特征和分布特征等问题,研究结果为识别和确认古冲沟冲积扇体油气藏提供依据     

海底地震仪广角地震试验

介绍了海底地震仪(OBS)的基本原理、结构和海上调查方法,针对解决东海冲绳海槽地壳结构及性质等目的,利用大容量气枪枪阵震源和海底地震仪在东海冲绳海槽首次开展人工地震深部地球物理探测试验。本次试验布设一条NNW—SSE向垂直构造走向的勘测线,共投放海底地震仪40台,回收成功36台。获得了有效的深部地震数据,可识别到Pg、PmP、Pn等多种震相。此次试验是我国在冲绳海槽深部探测中的成功示范,有效填补了该地区深部地震数据的空白,为解决冲绳海槽深部地质问题奠定了坚实的基础。     

南黄海盆地二叠系地震地层特征与识别

南黄海盆地钻遇二叠系的井仅有4口,对大面积无井区(如崂山隆起)的地层特征认识不统一。从二叠系岩性特征和海陆钻井地层对比为出发点,结合二叠系内部及其上下地层的地震波组和速度特征,认为南黄海盆地二叠系分上下2段。上段为大隆—龙潭组含煤碎屑岩地层,煤系地层较薄且分布不稳定,存在相变特征,使得该组地层在地震反射特征上的规律性变差,地震上表现为较连续、中—高频反射和低速特征;下段为栖霞组灰岩夹泥页岩地层,地震上表现为较连续、中—低频反射和高速特征。在无井区识别二叠系时,抓住二叠系地层界面极性为"2负+1正"的强反射特征。下二叠统—中、上石炭统地震波组特征相似,由4~5个同相轴组成,厚度稳定(时间约为200 ms),地震波极性表现为"上正下负"的地层界面反射特征,可作为全区追踪的标准层。     

大陆边缘沉积盆地流体逸散管道地震特征及其成因机制

流体逸散管道是深部流体向上运移所形成的通道,在大陆边缘沉积盆地中广泛发育。由地震资料显示,流体逸散管道主要由根部、过路区和末端3部分组成。由于形成机制、起源和流体成分的不同,其组成三要素有不同的表现形式,因此,流体逸散管道类型多样,具有不同的地震反射特征。水力压裂是文献中最常见的一种有关流体逸散管道形成机制的解释,但是,随着地震勘探的发展和研究的不断深入发现,水力压裂不足以解释所有类型的流体逸散管道,还存在其他的成因机制,包括流化侵蚀作用、局部空洞坍塌及同沉积模式等。从流体逸散管道组成三要素的角度描述了不同类型流体逸散管道的地震反射特征,并详细论述了其4种成因机制下的形成过程。     

Seismic Stability of Gravity Retaining Structures by Pseudo-Dynamic Method

An analytical expression of a gravity retaining wall's seismic stability against sliding and overturning is proposed in this article. The derivation, aiming at the cohesionless soil with inclined backfill surface and nonvertical wall back, is based on limit equilibrium analysis and the pseudo-dynamic method. The variations of the sliding and overturning stability safe factors with the horizontal seismic acceleration are investigated for different seismic amplification factors, soil friction angles, wall friction angles, vertical seismic acceleration coefficients, wall back inclination angles, and backfill surface inclination angles. The results indicate that the soil friction and horizontal seismic action significantly impact the seismic stability. The increase of vertical earthquake action changes the curvature of stability factor curves. The wall friction and back inclination strengthen the gravity retaining wall's resistance to sliding and overturning failure while the backfill surface inclination plays a negative role in the seismic stability. We also found that the seismic stability safe factors calculated by the proposed method are larger but more reasonable than those by the Mononobe-Okabe method.     

JGN型耐高温建筑结构胶抗震加固性能研究

为有效增强建筑结构的抗震性能、提高建筑抗震水平,对JGN型耐高温建筑结构胶抗震加固性能展开研究。将高活性酚醛胺(T－31)作为主固化剂、聚酰胺树脂(PA)为辅助固化剂,结合气相白炭黑、超细石英砂、石棉纤维、纳米材料、环氧树脂等材料,制备JGN型耐高温建筑结构胶。在高温环境下,使用万能试验机分析不同配比条件对结构胶抗震加固性能的影响。测试主要以拉伸强度、压缩强度以及压缩弹性模量为指标。测试结果表明：当固化剂质量比为45∶15、气相白炭黑掺量为4.5%、超细石英砂掺量为10%、石棉纤维掺量为10.5%、纳米SiO₂掺量为3.5%、纳米CaCO₃掺量为2.5%时,JGN型耐高温建筑结构胶的拉伸强度和压缩强度更大,压缩弹性模量得到优化,结构胶的抗震加固性能达到最佳状态。     

Large aperture seismic imaging at a convergent margin: Techniques and results from the Costa Rica seismogenic zone

In March and April 1995 a cooperative German, Costa Rican, and United States research team recorded onshore-offshore seismic data sets along the Pacific margin of Costa Rica using the R/V Ewing. Off the Nicoya Peninsula we used a linear array of ocean bottom seismometers and hydrophones (OBS/H) with onshore seismometers extending across much of the isthmus. In the central area we deployed an OBS/H areal array consisting of 30 instruments over a 9 km by 35-km area and had land stations on the Nicoya Peninsula adjacent to this marine array and also extending northeast on the main Costa Rican landmass. Our goal in these experiments was to determine the crustal velocity structure along different portions of this convergent margin and to use the dense instrument deployments to create migrated reflection images of the plate boundary zone and the subducting Cocos Plate. Our specific goal in the central area was to determine whether a subducted seamount is present at the location of the 1990, M 7 earthquake off the Nicoya Peninsula and can thus be linked to its nucleation. Subsequently we have processed the data to improve reflection signals, used the data to calculate crustal velocity models, and developed several wide-aperture migration techniques, based on a Kirchhoff algorithm, to produce reflection images. Along the northern transect we used the ocean bottom data to construct a detailed crustal velocity model, but reflections from the plate boundary and top and bottom of the subducting Cocos plate are difficult to identify and have so far produced poor images. In contrast, the land stations along this same transect recorded clear reflections from the top of the subducting plate or plate boundary, within the seismogenic zone, and we have constructed a clear image from this reflector beneath the Nicoya shelf. Data from the 3-D seismic experiment suffer from high-amplitude, coherent noise (arrivals other than reflections), and we have tried many techniques to enhance the signal to noise ratio of reflected arrivals. Due to the noise, an apparent lack of strong reflections from the plate boundary zone, and probable structural complexity, the resulting 3-D images only poorly resolve the top of the subducting Cocos Plate. The images are not able to provide compelling evidence of whether there is a subducting seamount at the 1990 earthquake hypocenter. Our results do show that OBS surveys are capable of creating images of the plate boundary zone and the subducting plate well into the seismogenic zone if coherent reflections are recorded at 1.8 km instrument spacing (2-D) and 5 km inline by 1 km crossline spacing for 3-D acquisition. However, due to typical high amplitude coherent noise, imaging results may be poorer than expected, especially in unfavorable geologic settings such as our 3-D survey area. More effective noise reduction in acquisition, possibly with the use of vertical hydrophone arrays, and in processing, with advanced multiple removal and possibly depth filtering, is required to achieve the desired detailed images of the seismogenic plate boundary zone.     

南海中央海盆之东部次海盆后扩张期地层特征与影响因素

海底扩张形成的边缘海盆构造演化可划分为前扩张期、同扩张期与后扩张期等阶段。南海中央海盆巨厚的沉积地层大部分是扩张结束之后形成的,尤以东部次海盆地层厚度为最大。因受到不同因素的影响,在该次海盆不同的区域后扩张期发育的地层特征差别较大。这些现象反映海底扩张结束之后所发育的厚层地层中蕴含了大量南海构造演化的信息,因此深入分析该次海盆后扩张期的地层特征与影响因素是南海构造演化研究中不容忽略的环节。利用若干大洋钻孔年代地层资料,在过井剖面上进行合成地震记录标定、划分层序地层并确定其年代属性,并以此为依据分析讨论了本区的地层特征和相关的影响因素。结果表明,东部次海盆北部持续均衡的基底沉降和充足的陆缘物质形成厚度稳定的地层沉积;东部以微板块向马尼拉海沟俯冲为主要影响因素,使不同年代的地层各具特征;中部和西部岩浆活动是主要的影响因素,形成以火山碎屑物质为主的地层沉积;南部因当时的陆坡沉积环境和浊流活动的影响形成具有沉积物波特征的地层沉积。     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.