岳阳及周边地区地震构造与地震活动性研究

陈述了岳阳市及周边地区的主要断裂带及其地震活动，归纳了发震部位。认为利用小震条带预报本区地震具有积极意义，并运用数理统计法预测了本区今后50及100年内的地震活动水平。     

Study of crustal structure with S—wave data from Maqen—Jingbian profile

2-D crustal velocity structure and vp/vs are obtained by processing and interpretation of S-wave data from Maqen-Jingbian deep seismic sounding(DSS)profile.The result shows that there exist obvious differences in 2-D S-wave velocity structure and vp/vs ratio structure along the profile.The S-wave velocities are low and vp/vs ration is high for the westem section of the profile and Haiyuan region,while they are normal for the middle and eastern sections.The changes in lithologic characters of two major anomalous zones are discussed according to lateral variation of S-wave velocity structure and vp/vs ratio structure.It is concluded that the development and occurrence of the Haiyuan strong earthquake is not only related to tectonic activities,but also to lithologic characters of the region.     

Statistical tests for regional seismic phase characterizations

In seismic analysis some assumptions are often made aboutthe data, e.g. stationarity and Gaussianity. This is not obvious for all realseismic data. Here, we use statistical tests for characterization of regionalseismic data. We apply tests for stationarity, symmetry, linearity, andtime-reversibility. In the analysis we use twelve regional seismic events inFennoscandia recorded with the seismic small-aperture arrays NORESS,ARCESS and FINESA at hypocentral distances in the range from 160 to1580 km. For the tests we use the regional phases Pn, secondary P, Sn and Lg-phases and the preceding noise. Two of the eventsare explosions, two are rockbursts and eight are earthquakes. Theperformance and possibilities of using statistical tests based on bispectra, asa complementary tool for conventional analysis of seismic phases isdemonstrated. The preceding noise recorded before the first onset of theP-wave for the twelve events is tested to be spatially stationarybetween each channel within each array and temporal stationary in 21consecutive time windows of 3.2 sec each. Also, the preceding noise issymmetric and linear. The seismic phases defined by the symmetry test asnon-Gaussian (not symmetric) are all linear. This means a linear model canbe used to characterize both the noise and the phases. The first P-phase for the two explosions is characterized as non-Gaussian at thethree arrays. For all 36 possibly first P-phase arrivals at the three arraystations, 23 are non-Gaussian. The second P-phase is non-Gaussian at13 of 36 data records, the S-phase at eleven of 36 and the Lg-phase at nine of 36. For all the four phases more than 32 of possible36 are time-reversible.     

Crustal structure beneath the Songpan—Garze orogenic belt

The Benzilan-Tangke deepseismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE.Based on the travel times and the related amplitudes of phases in the record sections,the 2-D P-wave crustal structure was ascertained in this paper.The velocity structure has quite strong lateral variation along the profile.The crust is divided into 5layers,where the first,second and third layer belong to the upper crust,the forth and fifth layer belong to the lower crust.The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile,and it integrates into the overlying low velocity basement in the area to the north of Ma‘erkang.The crustal structure in the section can be divided into 4parts:in the south of Garze-litang fault,between Garze-Litang fault and Xianshuihe fault,between Xianshuihe fault and Longriba fault and in the north of Longriba fault,which are basically coincided with the regional tectonics division.The crustal thickness decreases from southwest to northeast along the profile,that is ,from62km in the region of the Jinshajiang River to 52km in the region of the Yellow River.The Moho discontinuity does not obviously change across the Xianshuihe fault basesd on the PmP phase analysis.The crustal average velocity along the profile is lower,about 6.30 km/s.The Benzilan-Tangke profile reveals that the crust in the study area is orogenic.The Xianshuihe fault belt is located in the central part of the profile,and the velocity is positive anomaly on the upper crust,and negative anomaly on the lower crust and upper mantle.It is considered as a deep tectonhic setting in favor of strong earthquake‘s accumulation and occurrence.     

Nonlinear Rate Dependent Model of High Damping Rubber Bearing

The accurate analysis of the response of isolated structures requires the application of appropriate models of isolation devices. The purpose of this paper is to analyse a nonlinear strain rate dependent model of a high damping rubber bearing which simulates the horizontal behaviour of the device under specified vertical load using a nonlinear elastic spring-dashpot element. The effectiveness of the model is checked by fitting the experimental data concerning three different rubber bearings. The results of the study show that the model can simulate the bearing behaviour over a wide shear strain range with small simulation errors. This revised version was published online in July 2006 with corrections to the Cover Date.     

Inelastic dynamic analysis of RC bridges accounting for spatial variability of ground motion,site effects and soil–structure interaction phenomena. Part 1: Methodology and analytical tools

During strong ground motion it is expected that extended structures (such as bridges) are subjected to excitation that varies along their longitudinal axis in terms of arrival time, amplitude and frequency content, a fact primarily attributed to the wave passage effect, the loss of coherency and the role of local site conditions. Furthermore, the foundation interacts with the soil and the superstructure, thus significantly affecting the dynamic response of the bridge. A general methodology is therefore set up and implemented into a computer code for deriving sets of appropriately modified time histories and spring–dashpot coefficients at each support of a bridge with account for spatial variability, local site conditions and soil–foundation–superstructure interaction, for the purposes of inelastic dynamic analysis of RC bridges. In order to validate the methodology and code developed, each stage of the proposed procedure is verified using recorded data, finite‐element analyses, alternative computer programs, previous research studies, and closed‐form solutions wherever available. The results establish an adequate degree of confidence in the use of the proposed methodology and code in further parametric analyses and seismic design. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic response predictions of multi‐span steel bridges through pushover analysis

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.     

Flat mantle reflectors in Eastern China: possible evidence of lithospheric thinning

Recent 24 s deep seismic reflection records revealed five flat reflectors in the lithospheric mantle in Eastern China. With increasing depth, they are named M1 to M5 and can be seen on both field single-shot and stacked records. Reflector M1 corresponds to the Moho discontinuity, whereas M5 may be the reflection from the bottom of the current lithosphere, which is about 78 km deep according to geothermal measurements. The other three reflectors seem peculiar and might result from interactions between the lithosphere and deeper mantle. Based on lithological and geochemical data, it is suggested that the lithosphere has been thinned from about 150 km to about 60 km in the Late Mesozoic, and then has been thickened to about 78 km during the Cenozoic. The thinning process produced a granulite layer in the old lower crust caused by magmatic underplating, whereas an eclogite layer formed beneath owing to the subduction of the Paleo-Tethys and Yangtze Craton during the Permian and Early Mesozoic. Reflector M2 at about 12 s two-way traveltime (TWT) might result from the Paleozoic Moho, which represents the boundary between the previous granulite and eclogite facies. Reflector M3 at about 14 s might correspond to the bottom of the eclogite layer, beneath which the old lithospheric mantle remained. The old and the newly developed mantle may have different compositions, resulting in reflector M4. The multi-layered mantle reflectors demonstrate a mantle structure that possibly correlates with the lithospheric thinning process that occurred in Eastern China during the Late Mesozoic. The discovery of multi-layered mantle reflectors in the studied areas indicates a high heterogeneity of the upper mantle. Reflection seismology with improved technology, together with velocity and resistivity imaging and rock-physics measurements, can provide more details of the heterogeneity and related dynamic processes that occurred in the lithospheric mantle.     

MASS系统数据库的建立

根据地震数据资料的特点和系统服务功能的要求，采用当今先进的大型网络关系数据库模型构造了辽宁省数字遥测地震台网管理和服务系统数据库。本文对该数据库的总体设计和建立等做了较详细的介绍。     

两结构高效阻尼控制体系试验研究

本文通过模拟地震动振动台试验，研究了两个相邻结构模型的地震响应，结构模型采用一种高效阻尼装置(High Efficient Damper for Multi—Structure System即HEDMS)连接。非线性时程分析与振动台试验结果都证明了该阻尼装置能高效发挥软钢阻尼器的耗能能力，从而显著减轻两结构模型的地震响应。同时，研究还指出了进行阻尼装置设计时应该注意的一些问题。