基于抗震性态的设防标准研究

以基于性态的抗震设计为出发点,并以我国为例,针对目前国内外抗震设防标准的若干问题和不足,提出了基于性态抗震设计的三环节抗震设防方法．将现有的设防内容改为确定结构的抗震设计类别、确定设计烈度或设计地震动参数、确定建筑的重要性等级３个方面,并分别在每一方面进行具体深入的研究,从而形成了一套完整的基于性态的抗震设防标准确定的原则、方法和框架,可以直接用来编制规范供抗震设计使用．      

利用高频地震波检测混凝土构件完整性的方法

大型混凝土构件（如高层建筑基础的地梁,桩承台等）在施工过程中可能造成局部松散,空洞,蜂窝或离析等质量问题。为检测混凝土构件的的完整性,采用地震勘探方法中的地震映象法（又称地震共偏移距法）。通过在模拟裂缝,空洞模型上的试验,获得了存在异常体时,地震映象时间剖面的波形特征;测得偏移距,点距等参数变化时,对地震映象时间剖面的影响。模型实验和实测工作证明;在合理选择震源各种测量参数条件下,高频地震映象方法可有效检测混凝土构件完整怀,实现对混凝土构件质量新的监测。     

福建省地震重点监视防御区城市防震减灾体系工程简介

福建省地震重点视防御区城市防震减灾体系工程以中国地震局关于建立健全地震监测预报、震灾预防和紧急救援三大体系为主要目标 ,以国家和福建省确定的地震重点监视防御区为主要目标区 ,尤以切实加强重点监视防御内城市的防震减灾措施 ,强化城市对地震灾害的综合防御能力为主要建设内容。该项目得到中国地震局、福建省委、省政府和有关地市大力支持 ,已列为福建省“十五”重点项目 ,省委、省政府为民办实事重点项目     

Effect of near-fault earthquake on bridges: lessons learned from Chi-Chi earthquake

The objective of this paper is to describe the lessons learned and actions that have been taken related to the seismic design of bridge structures after the Chi-Chi, Taiwan earthquake. Much variable near-fault ground motion data was collected from the rupture of Chelungpu fault during the Chi-Chi earthquake, allowing the seismic response of bridge structures subjected to these near-fault ground motions to be carefully examined. To study the near-fault ground motion effect on bridge seismic design codes, a two-level seismic design of bridge structures was developed and implemented. This design code reflects the near-fault factors in the seismic design forces. Finally, a risk assessment methodology, based on bridge vulnerability, is also developed to assist in decisions for reducing seismic risk due to failure of bridges. Director of Center for Research on Earthquake Engineering. Supported by: the Science Council, Chinese Taipei, under grant no. SC 90-2211-E-002-028.     

井间地震层析成像分辨率研究

通过大量数值模型试验,并根据射线密度、射线正交性和点扩散函数,对井间地震层析成像的分辨率问题进行了研究。结果表明,井间地震层析成像的分辨率在空间上是可能性变的,垂直方向的分辨率好于水平方向,而且高速异常体和低速异常体的图像形态和分辨率是非一致的。高速异常体波形CT的图像水平方向最小分辨率距离为1/2波长,垂直分辨率最小分辨率距离为3/10波长;而低速异常体的波形CT图像的水平方向的最小分辨率约为2/5波长,垂向最小分辨率约1/5个波长;走时CT的图像水平方向最小分辨率为3个像元,垂直方向的最小分辨率距离为2个像元;当井深与井间距之比为2时,图像分辨率最高。     

澜沧-耿马Ms7.6级地震前兆综合加权信息量的变化

在地震综合信息量的基础上,改进了地震前兆异常的出现概率的计算方法,得到地震前兆综合加权信息量.利用"地震预报专家系统"的思想对每一异常事件进行综合评估.考虑到异常的可靠性、有效性、显著性及相互关联性,给予不同的权重,以每一异常事件的最可能发震时间来估算异常出现的概率,计算了澜沧-耿马地震的地震前兆综合加权信息量,并对这种信息量变化的特点进行了分析.     

地震安全性评价和高层建筑的地震动输入

本文根据现行的中国地震烈度区划图中烈度的含义,指出在使用现行“建筑抗震设计规范”时存在的一些问题和与《中华人民共和国防震减灾法》的不协调之处。根据多年参加工程场地地震安全性评价的经验,总结了目前进行地震安全性评价过程中存在的一些问题。文中建议：针对高层建筑进行新的场地分类方法的研究;对高层建筑工程场地作地震安全性评价时,可根据高度的不同,适当简化安全性评价过程。     

Two attempts of study of seismic source from teleseismic data by simulated annealing non-linear inversion

Two seismic source studies usingteleseismic data are performed by Simulated Annealing(SA), a non-linear inversion method. The Very FastSimulated Annealing (VFSA) algorithm is used and onlyteleseismic data are inverted. We have designed a fastand efficient way of multiple direct problemevaluation, which is based on pre-calculating theelementary Green's function. During the process we setthe values of the inversion control parameters(temperature, number of iterations) and modified thecooling schedule. In the current version, theinversion seeks for the point source mechanism, thedepth of the source, the scalar moment and the sourcetime function (STF). The method is applied to twoearthquakes: 18 Nov. 1992 in Greece, M 5.9 and 14 Sep.1995 in Mexico, M7.3. The calculation is performed ona simple 1D model of the structure. For the firstearthquake the inversion recovered the solution fairlywell; for the second the solution was less acceptable.However, we do not consider this fact to be a failureof the method, but a consequence of an inadequatemodel of the source and of the medium structure. Acasual attempt of reliability determination was alsoperformed; the obtained values of errors arereasonable, except for a few cases when the methodfailed.     

隧道掘进中掌子面前方岩石结构的超前预报

以地球物理勘探方法进行隧道掘进中前方岩石结构的超前预报,具有快捷、准确和实时处理及显示的优点。通过该方法可及时、详细地了解开挖掌子面前方岩石结构情况,为施工单位合理安排施工进度和减少工程隐患提供依据。以吉林省白山市石碑岭隧道掘进中所进行的超前预报为例,介绍了地质雷达和地震反射波法在这一领域里的应用。     

Modelling considerations in probabilistic performance‐based seismic evaluation: case study of the I‐880 viaduct

Limitations associated with deterministic methods to quantify demands and develop rational acceptance criteria have led to the emergence of probabilistic procedures in performance‐based seismic engineering. The Pacific Earthquake Engineering Research performance‐based methodology is one such approach. In this paper, the impact of certain modelling decisions made at different stages of the evaluation process on the performance assessment of a typical multi‐bent viaduct is examined. Modelling, in the context of this paper, covers hazard modelling, structural modelling and loss modelling. The specific application considered in this study is a section of an existing viaduct in California: the I‐880 interstate highway. Several simulation models of the viaduct are developed, a series of nonlinear time‐history analyses are carried out to predict demands, measures of damage are evaluated and the probability of closure of the viaduct is estimated using the specified hazard for the site. It is concluded that the methodology offers several advantages over existing deterministic performance‐based procedures. Results of the investigation indicate that the assessment methodology is particularly sensitive to the reliability of decisions made by bridge inspectors following a seismic event, and to the dispersion in the demand estimation, which in turn is influenced by several factors including soil–structure interaction effects and ground motion scaling procedures. Copyright © 2005 John Wiley & Sons, Ltd.