Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers

In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.     

Seismic structure and tectonics of the Shackleton Fracture Zone (Drake Passage,Scotia Sea)

The structural framework of the southern part of the Shackleton Fracture Zone has been investigated through the analysis of a 130-km-long multichannel seismic reflection profile acquired orthogonally to the fracture zone near 60° S. The Shackleton Fracture Zone is a 800-km-long, mostly rectilinear and pronounced bathymetric lineation joining the westernmost South Scotia Ridge to southern South America south of Cape Horn, separating the western Scotia Sea plate from the Antarctic plate. Conventional processing applied to the seismic data outlines the main structures of the Shackleton Fracture Zone, but only the use of enhanced techniques, such as accurate velocity analyses and pre-stack depth migration, provides a good definition of the acoustic basement and the architecture of the sedimentary sequences. In particular, a strong and mostly continuous reflector found at about 8.0 s two-way traveltime is very clear across the entire section and is interpreted as the Moho discontinuity. Data show a complex system of troughs developed along the eastern flank of the crustal ridge, containing tilted and rotated blocks, and the presence of a prominent listric normal fault developed within the oceanic crust. Positive flower structures developed within the oceanic basement indicate strike-slip tectonism and partial reactivation of pre-existing faults. Present-day tectonic activity is found mostly in correspondence to the relief, whereas fault-induced deformation is negligible across the entire trough system. This indicates that the E–W-directed stress regime present in the Drake Passage region is mainly dissipated along a narrow zone within the Shackleton Ridge axis. A reappraisal of all available magnetic anomaly identifications in the western Scotia Sea and in the former Phoenix plate, in conjunction with new magnetic profiles acquired to the east of the Shackleton Fracture Zone off the Tierra del Fuego continental margin, has allowed us to propose a simple reconstruction of Shackleton Fracture Zone development in the general context of the Drake Passage opening.     

Siltation Prediction for Navigation Channels and Harbour Basins on Muddy Beach

- This paper, after briefly reviewing the experimental research on sediment transport on muddy beach since the 1950s, improves and perfects the method for forecasting siltation in navigation channels and harbour basins which was first put forward in China by the authors. In consideration of silty sediment and sand, some factors in forecasting methods have been changed and modified. Consequently, the modified methods can be used either to compute siltation in navigation channels and harbour basins on muddy beach or to compute siltation and scouring in navigation channels and harbour basins on both silty beach and sandy beach. The verification of field data from eleven large, medium and small natural harbours shows a good agreement between the forecasting by the modified method and the natural conditions. Finally, the paper deals with the rational utilization of water area after the construction of the West Dyke in Lianyungang, the maintenance of water depth of the navigation channel at the entrance, siltation distribution, siltation in the navigation channel and harbour basin for ships of 100 thousand tonnnage. Results once again prove that the prospect of constructing Lianyungang Harbour into a deepwater harbour is bright.     

城市建设中的地震小区划与浅层地震探测

简要阐述地震小区划在现代城市建设中的重要性以及在实施地震小区划的研究中浅层地震探测的重要作用及其方法原理,并给出应用浅层地震探测在城市地震小区划中的实例。     

松辽盆地西部张裂缝预测的应力场方法

以松辽盆地地质资料为基础，介绍了应力场和张裂缝预测的计算方法。通过了各种岩性的张破裂概率隶属函数，预测松辽盆地酉部张裂缝区的分布。据此，为今后的油气勘探提出了几点认识和建议。     

Pressure prediction in the Bullwinkle Basin through petrophysics and flow modeling (Green Canyon 65, Gulf of Mexico)

Reservoir pressures within the Bullwinkle minibasin (Green Canyon 65, Gulf of Mexico continental slope) increase at a hydrostatic gradient whereas pressures predicted from porosity within mudstones bounding these reservoirs increase at a lithostatic gradient: they are equal at a depth 1/3 of the way down from the crest of the structure. Two- and three-dimensional steady-state flow models demonstrate that bowl-shaped structures will have lower pressures than equivalent two-dimensional structures and that if a low permeability salt layer underlies the basin, the pressure is reduced. We conclude that at Bullwinkle, pressure is reduced due to an underlying salt body and the bowl-shape of the basin. A geometric approach to predict sandstone pressure is to assume that the reservoir pressure equals the area-weighted average of the mudstone pressure. When the mudstone pressure gradient is constant, as at Bullwinkle, the reservoir pressure equals the mudstone pressure at the average depth (centroid) of the reservoir.     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

Filters for linear sea-wave prediction

Deterministic sea-wave prediction (DSWP) models are appearing in the literature designed for quiescent interval prediction in marine applications dominated by large swell seas. The approach has focused upon spectral methods which are straightforward and intuitively attractive. However, such methods have the disadvantage that while the sea is aperiodic in nature, the standard discrete spectral processing techniques force an absolutely periodic structure onto the resulting sea surface prediction models. As it is the shape of the sea surface that is important in such applications, particularly near the end of the domain which is important, the standard windowing techniques used in signal processing work to reduce leakage artifacts cannot be employed. This has necessitated the use of end matching methods that can be both inconvenient and may reduce the fraction of the time for which legitimate predictions are available. As a result, an investigation has been undertaken of the use of finite impulse response prediction filters to provide the necessary dispersive phase shifting required in DSWP systems. The present work examines the theoretical basis for such filters and explores their properties together with their application to both long and short crested swell seas. It is shown that wide band forms of such filters are only convergent in the sense of distributions having both infinite duration impulse responses and asymptotically divergent first derivatives. However, appropriate band limitation can produce useful finite impulse responses allowing implementation via standard discrete convolution methods. It is demonstrated that despite the prediction filters having a non-causal impulse response such filters can be used in practice due to a combination of the asymmetric nature of the impulse response and the fundamental nature of the prediction process. The findings are confirmed against actual sea-wave data.     

基于神经网络的平底结构砰击压力预报

对利用神经网络预报平底结构入水砰击压力的方法进行了探讨。首先利用仿真软件计算各种情况下平底结构入水所产生的砰击压力，以此形成训练神经网络的数据集。其次利用数据集对三层反馈式网络进行了训练，讨论了不同隐含层节点数对该非线性系统的拟合能力，并且对梯度下降法、动量修正法和基于优化的LM算法的有效性和精度进行了比较，最后得出了适合平底结构入水砰击系统的网络结构。