Relationship between the seismicity and geologic structure of the Blanco Transform Fault Zone

Morphologic studies of an oceanic transform, the Blanco Transform Fault Zone (BTFZ), have shown it to consist of a series of extensional basins that offset the major strike-slip faults. The largest of the extensional basins, the Cascadia Depression, effectively divides the transform into a northwest segment, composed of several relatively short strike-slip faults, and a southeast segment dominated by fewer, longer faults. The regional seismicity distribution (m _b 4.0) and frequency-magnitude relationships (b-values) of the BTFZ show that the largest magnitude events are located on the southeast segment. Furthermore, estimates of the cumulative seismic moment release and seismic moment release rate along the southeast segment are significantly greater than that of the northwest segment. These observations suggest that slip along the southeast segment is accommodated by a greater number of large magnitude earthquakes. Comparison of the seismic moment rate, derived from empirical estimates, with the seismic moment rate determined from plate motion constraints suggests a difference in the seismic coupling strength between the segments. This difference in coupling may partially explain the disparity in earthquake size distribution. However, the results appear to confirm the relation between earthquake size and fault length, observed along continental strike-slip faults, for this oceanic transform.     

Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.     

Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

辽东湾两侧砂质海岸侵蚀灾害与防治

自20世纪60年代至90年代，由于多种原因，辽东湾东西两侧的初始沙质海岸侵蚀范围逐年扩大，侵蚀不断加剧，给当人民的生产和生活带来严重危害。由多年监测资料发现，侵蚀严重的熊岳岸线以2～4m／a的速率而大幅度后退，特别严重的地区最大后退达10km；辽西绥中某些岸段平均每年后退1～2m。20世纪90年代后期，由于一些海域管理措施的出台和相应的海岸防护工程的建设，海岸侵蚀逐渐减弱。通过现场调查和多年监测，分析了辽东湾东西两侧砂质海岸侵蚀的特点，认为海岸组成物质松散与海岸动力作用强烈是本区现代海岸侵蚀的基本条件，人为活动是关键因素，并提出了海岸侵蚀灾害的防治对策。     

喀斯特荒漠化是一种地质—生态灾难

ＫＤＮ是一种ＧＥＯＬ－ＥＣＯＬ灾难,是发生潮湿的碳酸盐岩区的土壤侵蚀、土地退化与生态系统凋萎,致使人类很难生活在其中。ＫＤＮ是我国四大ＧＥＯＬ－ＥＣＯＬ灾害中最难整治、最难摆脱贫困的地区。本文按国际公认的原则为准,认定“石山化”≠ＫＤＮ,从地质结构性气候、物候和生态系统多因子厘定了ＫＤＮ术语,认定人为扰动与人口超载是其产生的序参量。其过程最迟也是３００多年前明清朝代屯垦开始,近半个世纪加速衰竭,森     

风暴潮灾与月相

本文以实测资料为依据,统计分析了风暴潮灾、风暴潮、登陆台风、天文高潮等与月相的关系。统计资料表明,登陆台风和台风风暴潮发生在大(小)潮期的次数相对较多,略大于平均数,但它们与月相没有明显的因果关系,它们相对于月相的分布大致上是随机的,如果台风在天文大潮期间登陆,台风引起的暴潮与天文潮叠加后成灾的概率明显增大,但也不一定成灾;成了灾的,往往是风暴潮峰值适逢当日的天文高潮所致。     

广东红海湾、珠江口及电白—阳江近海第四纪沉积

根据物探和钻探资料，研究区内第四纪沉积物可分为两部分，下部地震反射结构复杂，斜层理发育，粒度较粗，为晚更新世产物；上部的地震反射结构简单，呈水平状或近水平状结构，粒度较细，为全新世沉积。     

Southern Segment of the European Geotraverse — a wide-angle seismic refraction experiment in the Sardinia Channel

The Sardinia Channel dataset was collected as part of the European Geotraverse (EGT)—a 4000 km seismic refraction line running from Northern Norway to the Sahara, designed to investigate the structure of the lithosphere beneath Europe. Wideangle seismic data recorded by ocean bottom seismometers deployed in the Sardinia Channel as part of the Southern Segment of the EGT, together with gravity data, were used to constrain the final crustal model. In the centre of the Channel the crust is identified as thinned continental in nature, with a crystalline thickness of 10 km overlain by 4 km of sediments and 2.5 km of water in the most extended region. High velocities in the lower crust in the central region are thought to represent an area of underplating or intrusion by igneous material caused by extension related to the opening of the Tyrrhenian Sea. The crust overlies an anomalously low velocity upper mantle.