Relationship between the seismicity and geologic structure of the Blanco Transform Fault Zone

Morphologic studies of an oceanic transform, the Blanco Transform Fault Zone (BTFZ), have shown it to consist of a series of extensional basins that offset the major strike-slip faults. The largest of the extensional basins, the Cascadia Depression, effectively divides the transform into a northwest segment, composed of several relatively short strike-slip faults, and a southeast segment dominated by fewer, longer faults. The regional seismicity distribution (m _b 4.0) and frequency-magnitude relationships (b-values) of the BTFZ show that the largest magnitude events are located on the southeast segment. Furthermore, estimates of the cumulative seismic moment release and seismic moment release rate along the southeast segment are significantly greater than that of the northwest segment. These observations suggest that slip along the southeast segment is accommodated by a greater number of large magnitude earthquakes. Comparison of the seismic moment rate, derived from empirical estimates, with the seismic moment rate determined from plate motion constraints suggests a difference in the seismic coupling strength between the segments. This difference in coupling may partially explain the disparity in earthquake size distribution. However, the results appear to confirm the relation between earthquake size and fault length, observed along continental strike-slip faults, for this oceanic transform.     

Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.     

Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.     

Risk-based decision-making for drilling waste discharges using a fuzzy synthetic evaluation technique

Offshore petroleum drilling wastes contain toxic substances that are potentially harmful to the marine ecosystem. Despite environmentally benign characteristics, wastes associated with synthetic-based fluids still contain a certain amount of pollutants due to contamination with formation oil and the presence of trace heavy metals in barite, which may pose risk when discharged into the marine environment. A framework is presented here for a decision support system for the selection of the best drilling waste discharge option. Uncertainties in the quantification of risk, cost and technical feasibility are expressed by fuzzy numbers. An analytical hierarchy process with a technique called fuzzy synthetic evaluation is employed to determine the best management alternative (discharge scenario).     

关于海水网箱养殖系统风险评估的基础研究

随着海水网箱养殖业的迅速发展,制约海水网箱养殖发展的种种因素也逐步显露出来(风暴潮等恶劣气候、环境污染、人为的破坏等等),海水网箱养殖在预期获得丰厚利润的同时也面临遭受巨大损失的风险。本文对海水网箱养殖系统风险评估的可操作性进行了基础研究,提出了一套适合海水网箱养殖系统的风险评估方法,并就数据的收集和专家评审表做了一些研究,以此客观的反映系统的安全性和可靠性,使决策者实现对养殖系统生命周期的最佳控制。     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Damage Detection Methods for Offshore Platforms Based on Wavelet Packet Transform

1 .IntroductionInthe whole service period of the platforms ,some damage is unavoidable due to the corrosion,impact ,fatigue and so on.The damage whould cause the structures’ultimate capacity and safety de-crease .Presently,it is generally acceptedthat the detection of damage involes considerable statisticaluncertainties,thus lot of efforts is made for the damage probalility model ,for example Song and Lu(1996) usedthefuzzy-settheoryto estimatethe humanerrorsthroughthe definitionof inspection…     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

运用德尔菲调查—灰色统计法确立水库鱼产力综合评价中的指标权重体系

本文运用德尔菲方法对水库鱼产力综合评价中指标权重的合理分配问题作了专家调查,并采用灰色统计法对调查结果进行归纳处理,从而确立了一个水库鱼产力影响因素诸层次各方面的评价指标权重体系,可供今后的评价工作参考使用。