水库鱼产力评价标准与模式的研究

本文在总结国内外已有成果的基础上,运用专家系统和灰色统计方法,初步建立了一套水库鱼产力评价的指标体系、指标权重体系和指标标准体系,首次给出了比较系统和具有普适意义的评价方案;并运用模糊数学方法建立了综合定量评价模式,从而在很大程度上解决了以往评价中由于多指标重迭、交错造成的难判、误判问题,为水库渔业资源的合理开发利用提供了比较科学的依据。     

Fatigue Behavior of Plain Concrete Under Biaxial Compression: Experiments and Theoretical Model

The effects of different lateral confinement stress on the fatigue behavior of and cumulative damage to plain concrete are investigated experimentally. Eighty 100 mm x 100 mm x 100 mm specimens of ordinary strength concrete are tested under constant- or variable-amplitude fatigue loading and lateral confinement pressure in two orthogonal directions. A fatigue equation is developed by modifying the classical Aas-Jakobsen S-N equation for taking into account the effect of the confined stress on fatigue strength of plain concrete. The results of variable-amplitude fatigue tests indicate that the linear damage theory proposed by Palmgren and Miner is unreasonable in the biaxial stress state. A nonlinear cumulative damage model that could model the effects of the magnitude and sequence of variable-amplitude fatigue loading and lateral confinement pressure is proposed on the basis of the evolution laws of the residual strains in the longitudinal direction during fatigue tests. The residual fatigue life predic     

城市建设中的地震小区划与浅层地震探测

简要阐述地震小区划在现代城市建设中的重要性以及在实施地震小区划的研究中浅层地震探测的重要作用及其方法原理,并给出应用浅层地震探测在城市地震小区划中的实例。     

Documenting hurricane impacts on coral reefs using two-dimensional video-mosaic technology

Four hurricanes impacted the reefs of Florida in 2005. In this study, we evaluate the combined impacts of hurricanes Dennis, Katrina, Rita, and Wilma on a population of Acropora palmata using a newly developed video‐mosaic methodology that provides a high‐resolution, spatially accurate landscape view of the reef benthos. Storm damage to A. palmata was surprisingly limited; only 2 out of 19 colonies were removed from the study plot at Molasses Reef. The net tissue losses for those colonies that remained were only 10% and mean diameter of colonies decreased slightly from 88.4 to 79.6 cm. In contrast, the damage to the reef framework was more severe, and a large section (6 m in diameter) was dislodged, overturned, and transported to the bottom of the reef spur. The data presented here show that two‐dimensional video‐mosaic technology is well‐suited to assess the impacts of physical disturbance on coral reefs and can be used to complement existing survey methodologies.     

随机载荷下的疲劳损伤计算公式

本文推导了随机载荷下的疲劳损伤计算公式。数值计算结果表明：Ｐ．Ｈ．Ｗｉｒｓｃｈｉｎｇ给出的公式在宽带情况下与实际情况不符；Ｇ．Ｃｈａｕｄｈｕｒｙ给出的公式在窄带情况下与实际不符；本文绘出的公式不仅适合于窄带，也适合于具有各种不同带宽的宽带随机载荷。     

The petroleum evaluation of a tectonically complex area: The western margin of the Southeast Basin (France)

The Southeast Basin of France is the thickest onshore French sedimentary basin which contains locally as much as 10 km of Mesozoic-Cenozoic sediment. Basin development occurred in several stages between late Carboniferous and late Cretaceous times. Partial tectonic inversion took place during two compressive events, the so-called ‘Pyrenean’ and ‘Alpine’ phases of late Cretaceous-early Tertiary and late Tertiary ages respectively. They are separated by an intervening stretching event of Oligocene age, which further south resulted in the opening of the western Mediterranean oceanic basin. As a result of this complex tectonic history, structural traps were difficult to image on the seismic data shot during the first phase of exploration prior to 1980. Oil and gas natural seeps, and shows in several wells, indicate that some petroleum systems are, or have been active, at least in some places.The present erosional western margin of the basin is more or less superimposed on the initial Triassic-Jurassic margin. Margin subsidence and Tertiary inversion are discussed using regional sections on which the polyphase history of the entire basin is well shown. These sections are located on three major segments where the Mesozoic margin is either partly preserved (Ardèche), or has been partly inverted in late Tertiary times (Vercors-Chartreuse), or has been completely inverted in early Tertiary times (Corbières-eastern Pyrenees). 1-D ‘Genex’ basin modelling on the Ardèche segment, and 2-D ‘Thrustpack’ structural-maturity modelling in the Vercors-Chartreuse segment are used to further assess the remaining petroleum plays.     

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.     

废弃海洋桩基平台拆除方案的系统决策研究

海洋平台拆除是一项复杂的、受多种因素制约的、涉及许多技术领域的综合性系统工程。采取适当的拆除方案是工程安全、经济、环保地进行的基础和保证。针对这一问题，文章对拆除方案的评估进行了系统的研究，从环境、工艺、安全、经济、工期的角度建立了拆除方案评估指标体系，并综合运用群决策层次分析理论和模糊数学理论对拆除方案进行系统的评估。经实例验证，所建立的评估指标体系，可科学、公正、快捷地对方案进行评估，为决策者提供科学的决策基础。     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.