Anatomy of a subduction complex: architecture of the Franciscan Complex,California, at multiple length and time scales

The Franciscan Complex of California records over 150 million years of continuous E-dipping subduction that terminated with conversion to a dextral transform plate boundary. The Franciscan comprises mélange and coherent units forming a stack of thrust nappes, with significant along-strike variability, and downward-decreasing metamorphic grade and accretion ages. The Franciscan records progressive subduction, accretion, metamorphism, and exhumation, spanning the extended period of subduction, rather than events superimposed on pre-existing stratigraphy. High-pressure (HP) metamorphic rocks lack a thermal overprint, indicating continuity of subduction from subduction initiation at ca. 165 Ma to termination at ca. 25 Ma. Accretionary periods may have alternated with episodes of subduction erosion that removed some previously accreted material, but the complex collectively reflects a net addition of material to the upper plate. Mélanges (serpentinite and siliciclastic matrix) with exotic blocks have sedimentary origins as submarine mass transport deposits, whereas mélanges formed by tectonism comprise disrupted ocean plate stratigraphy and lack exotic blocks. The former are interbedded with and grade into coherent siliciclastic units. Palaeomegathrust horizons, separating nappes accreted at different times, appear restricted to narrow zones of <100 m thickness. Exhumation of Franciscan units, both coherent and mélange, was accommodated by significant extension of the hanging wall and cross-sectional extrusion. The amount of total exhumation, as well as exhumation since subduction termination, needs to be considered when comparing Franciscan architecture to modern and ancient subduction complexes. Equal dextral separation of folded Franciscan nappes and late Cenozoic (post-subduction) units across strands of the (post-subduction) San Andreas fault system shows that the folding of nappes took place prior to subduction termination. Dextral separation of similar clastic sedimentary suites in the Franciscan and the coeval Great Valley Group forearc basin is approximately that of the San Andreas fault system, precluding major syn-subduction strike-slip displacement within the Franciscan.     

花岗岩残积土动态冲击性能的SHPB试验研究

为研究花岗岩残积土的动态冲击性能,开展了高速冲击下的分离式霍普金森压杆（SHPB）试验,与常规应变率下的试验结果比较,分析了高应变率对花岗岩残积土的应力?应变特性和强度的影响。结果表明：低、高应变率下的花岗岩残积土的?-?a（轴向应力?轴向应变）曲线均呈现出软化型。随着应变率 增加,?-?a曲线向?a增大的方向移动,破坏应变?af增加。但高应变率下?af增加的程度更加明显。花岗岩残积土的峰值强度普遍具有应变率依赖性,二者可用直线关系拟合,但低、高应变率下的拟合关系并不一致。提出了率敏性因子m定量评价依赖性强弱。研究发现,随着应变率的提高,强度的应变率依赖性减弱,低应变率下的m为26.694,而高应变率下仅为0.013。相关试验结果指出,高速冲击荷载对土体总体有害。工程中应该采取合理措施控制冲击荷载的危害。该研究有助于深化花岗岩残积土动态冲击性能的理解,为相关工程的施工与设计提供技术参考。     

地震资料在徐家围子断陷沙河子组潜在烃源岩预测中的应用

徐家围子勘探实践表明,沙河子组烃源岩的分布控制着烃类气藏的分布。通过比较各种勘探方法及在研究区的具体适用情况,以及在徐家围子断陷勘探程度和各种资料综合分析的基础上,确定以地震相法为主要预测方法。根据钻遇沙河子组地层的单井沉积相并结合井点地震反射特征,总结出4 类沙河子组潜在烃源岩的地震反射特征,并在全断陷对沙河子组的烃源岩品质进行整体评价。结合沙河子组地层厚度、有机碳指标、Ｒo 值、泥地比值和地震相特征等烃源岩品质评价的依据,将沙河子组烃源岩有利区划分为I 类区、II1 类区和II2 类区以及III 类区。     

冻结粉土动强度的荷载效应及长期极限动强度

荷载效应包括速率效应和疲劳效应两部分．速率效应使冻土的动强度和退荷回弹动弹模随应变速率加快而提高;疲劳效应使冻土的动强度随振频增加而下降,但在低应变速率下却使动强度略有提高．在高应变速率下动强度大于静强度,在低应变速度下动强度小于静强度,其间存在一个临界应变速率．通过动强度－破坏振次关系,可确定长期极限动强度．     

地震荷载作用下温度和围压对冻土强度影响的试验研究

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。     

利用地震属性解释煤层冲刷带

把地震属性技术和地震相分析技术应用于煤层冲刷带的解释工作中。首先从煤层反射波中提取了多种地震属性;然后分析对比地震属性与煤层冲刷带的响应特征;最后利用响应特征明显的地震属性对煤层冲刷带进行了综合解释,确定了煤层冲刷带的范围。与传统钻探解释方法相比,地震属性方法能够更准确地圈定煤层冲刷带的边界。     

A Step Towards Evaluation of the Seismic Response Reduction Factor in Multistorey Reinforced Concrete Frames

A seismic nonlinear time-history analysis was made for four-, six-, and eight-storey reinforced concrete buildings. These buildings were made as three-dimensional space frame structures with shear walls in both orthogonal directions. They have five bays with 4.8 m spacing each in the horizontal direction, and three bays with 4.2 m spacing each in the transversal direction. The frames were designed according to the Jordanian Seismic Code of practice for Seismic Zones 4, 3, 2, and 1 as proposed for Jordan by several authors. Time-history analysis was made using the El Centro (N-S) earthquake record of May 1940 as an actual earthquake excitation. The response reduction factor (R) that primarily consists of two factors that are the ductility reduction (Rµ) and the overstrength (), is obtained. It has been seen that the seismic zoning has a slight effect on the ductility reduction factor for different buildings, since it ranges from Zone 4 to Zone 1 as 2.37 to 2.52, 1.72 to 1.78, and 1.14 to 1.18 for four-, six-, and eight-storey buildings, respectively. Moreover, it is observed that, for different buildings and different seismic zones, the ductility reduction factor (Rµ) is slightly different from the system ductility factor (µ) especially for higher values of µ (i.e., Rµ µ). The response reduction factor, called overstrength (), was evaluated. The overstrength factor was found to vary with seismic zones (Z) , number of stories, and design gravity loads. However, the dependency on seismic zones was the strongest. The average overstrength of these buildings in Zones 4 and 1 was 2.61 and 6.94, respectively. The overstrength increased as the number of storeys decreased: overstrength of a four-storey building was higher than an eight-storey building by 36% in Zone 4, and 39% in Zone 1. Furthermore, buildings of the three heights had an average overstrength 165.9% higher in Zone 1 than in Zone 4. These observations have a significant implications for the seismic design codes which currently do not take into account the variation of the response reduction factor, R (i.e., ductility reduction factor times overstrength).     

跨孔条件下椭球模型的视电阻率异常特征

在跨孔条件下，利用积分方程法计算了孔区内外不同位置、不同产状的三维椭球体模型视电阻率异常。根据所得的典型数值模拟结果，借助视电阻率异常信息剖面图，对异常进行研究，总结了异常特征及其变化规律，并以此为基础分析和认识了其他模型的异常特征。     

苏鲁超高压变质岩中地震波速随围压的变化规律

我们在10~800MPa的静水压力下测量了中国大陆科学钻探(CCSD)主孔岩心和采自苏鲁地区地表露头上的共68块典型超高压变质岩试样的地震波速,并建立了波速和围压的定量关系,成功地解释了描述这一定量关系方程中4个参数的物理意义。笔者相信,本文将为超高压变质岩地区以及新老俯冲带地震波资料的解释提供必不可少的理论和实验支撑。     

极震区岩体地震动力破坏研究体系框架浅析

极震区岩体地震动力破坏是造成极震区严重的地震地质灾害和次生灾害的根本原因。汶川地震中因此而导致的交通工程结构损坏、中断和次生崩滑流、堰塞湖等地质灾害,不仅加剧了灾害损失,并给震后的灾区恢复重建和对外交通遗留了较多的安全隐患。从岩体稳定、山体稳定和区域稳定的层次,分别对有关极震区岩体地震动力破坏的主要研究成果进行了系统总结,分析了其现状和存在的问题。结合对研究思路和方法论的讨论,构建了极震区岩体地震动力破坏研究的体系框架,提出了极震区岩体地震动力破坏研究的主要内容和方向,以期明晰概念,理清思路,为有关问题的深入研究提供有益的参考。