Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

哀牢山-红河断裂带中段应变分析

对哀牢山—红河断裂带中段和平—水塘剖面、墨江—元江剖面和其它地段的岩石应变及磁组构进行了分析，表明应变强度的校正磁各向异性度PJ从断裂带向西至三叠系明显降低，变形强度向西迅速减弱。磁化率椭球体主轴展布反映出剪切带内、外变形方式的改变。剪切带内，以水平走滑运动为主；向西则以水平缩短为主。在应变分析中，对断裂带内的S—C组构两组面理夹角、杏仁体和石榴石应变标志体进行了测量，结果显示，剪切带内的磁组构和岩石组构间关系较差。此外，还对这两条剖面中的三叠系进行了应变和磁组构分析，找出了它们与磁化率椭球体对应轴率间的相关性。     

广东红海湾、珠江口及电白—阳江近海第四纪沉积

根据物探和钻探资料，研究区内第四纪沉积物可分为两部分，下部地震反射结构复杂，斜层理发育，粒度较粗，为晚更新世产物；上部的地震反射结构简单，呈水平状或近水平状结构，粒度较细，为全新世沉积。     

Southern Segment of the European Geotraverse — a wide-angle seismic refraction experiment in the Sardinia Channel

The Sardinia Channel dataset was collected as part of the European Geotraverse (EGT)—a 4000 km seismic refraction line running from Northern Norway to the Sahara, designed to investigate the structure of the lithosphere beneath Europe. Wideangle seismic data recorded by ocean bottom seismometers deployed in the Sardinia Channel as part of the Southern Segment of the EGT, together with gravity data, were used to constrain the final crustal model. In the centre of the Channel the crust is identified as thinned continental in nature, with a crystalline thickness of 10 km overlain by 4 km of sediments and 2.5 km of water in the most extended region. High velocities in the lower crust in the central region are thought to represent an area of underplating or intrusion by igneous material caused by extension related to the opening of the Tyrrhenian Sea. The crust overlies an anomalously low velocity upper mantle.     

A technique for conducting seismic refraction experiments on the ocean bed using bottom shots

A technique has been devised for firing arrays of bottom shots on the ocean bed in depths upto 4000 m or more. Ten kilogram explosive charges are dropped from the surface while the shooting ship is navigated acoustically. They are detonated at preset times by an electronic timer which initiates an electrical detonator, detonating cord and cast PETN/TNT explosive. Ranges to ocean bottom seismographs, and the shot instants, can be calculated from the arrival-time differences of the direct and surface-reflected water waves. The accuracy, which is dependent on water-depth and range, was better than 22 m in range and 14 msec in shot instant for our experiments.     

冲绳海槽天然气水合物BSR的地震研究

根据多道地震反射资料分析,在冲绳海槽南部和中部发现了拟海底反射层(BSR)现象。通过对海底异常反射层的振幅特征、速度异常和AVO属性分析,说明该BSR可能反映了天然气水合物的存在,并发现冲绳海槽断层与天然气水合物的形成有密切关系。     

东营北部凸起带古冲沟储层分布规律研究

在油田勘探与开发中 ,充分认识古冲沟油气藏的勘探与开发是十分重要和有意义的。本文利用东营北部凸起带的地质、钻井、航磁和地震等资料 ,对古冲沟在地震剖面上的特征和古冲沟储层预测方法等进行了研究与探讨     

GPS技术在山区石油地震勘探测量中的应用

针对GPS技术在山区石油地震勘探测量中的工作方式,结合2007年度南盘江一桂中地区二维地震大剖面资料采集应用GPS的工程实例,介绍GPS技术应用的新进展。通过GPS静态测量和应用RTK技术放样物理点,从测前准备、数据处理、精度分析等方面,阐述提高作业精度、有效进行质量控制的方法,旨在最大限度地发挥GPS技术在山区施工中的作用。     

东海陆坡及邻近槽底天然气水合物成藏条件分析及前景

在西太平洋边缘海中,东海是唯一没有获得天然气水合物样品的边缘海。利用已有的地震资料、海底温度资料等,从沉积物来源、沉积地层厚度、烃源岩条件、沉积速率、海底温度—压力条件等方面对东海水合物成藏条件进行了分析。认为冲绳海槽沉积物源丰富,沉积厚度大,且发育烃源岩地层。冲绳海槽较高的沉积速率主要分布于冲绳海槽槽底沉积中心,以及西部陆坡连接海底峡谷底部的三角洲区域。根据冲绳海槽实测的海底温度数据,整个冲绳海槽地区600m以深的范围都能够满足水合物发育的温度、压力条件。以温度梯度为30℃/km计算,冲绳海槽中水合物稳定域的最大厚度为650m。冲绳海槽盆地中普遍发育的底辟构造、背斜构造等局部构造,以及网格状断裂系统,为烃类气流体的向上及侧向运移创造了有利条件,成为天然气水合物发育的有利区带。根据已经发现的BSR特征来看,东海地区天然气水合物前景广阔。