Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.     

Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.     

海浪周期关系的研究

本文利用现场观测数据、实验室风浪槽观测数据和由文氏谱及JONSWAP谱生成的模拟数据,研究了有效周期与谱平均周期、谱峰周期与谱平均周期以及有效周期与谱峰周期的关系,通过数据拟合给出了相应的关系式.研究发现,有效周期与由谱的负阶矩计算的平均周期之间的关系更加稳定,并且有效周期与负2阶矩计算的平均周期几乎相等,均代表了海浪主导波对海浪平均周期的贡献.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Locomotor activity rhythm in the Japanese eel Anguilla japonica elvers

Under artificial LD cycles(6,12,18 L),the elvers of Japanese eel,Anguilla japonica,showed a 24 h cycle of locomotor activity rhythm being most active at light transitions:the eels' activity rose to a primary peak after lights-off,followed by a quiescent period during which they buried into the shelters or lying motionlessly on sand for most of the time,and then reached a secondary peak before lights-on.Elvers could resynchronize their activity rhythm with a new photo cycle within 4 d.Moreover,their activity level at dark phase significantly increased as the light period was prolonged:higher activity levels during shorter dark period.However,the elvers did not display clearly the existence of a circadian rhythm under constant light or dark conditions.The timing of daily activity rhythm evidenced in the Japanese eels may occur through the action of the LD cycles with a weak participation of an endogenous circadian system.In all the LD cycles,over 99% of the activity occurred in the dark phase,indicating that the eels were always nocturnally active no matter what time of day it might be.Under 12 L conditions,the eels' activity level and the time outside sand were significantly elevated both at light and dark phases as temperature increased from 10~15 to 20~25 ℃.The activity rhythm pattern(i.e.,two peaks occurring around light transitions) did not apparently change among temperatures.However,in contrast with the primary activity peaks immediately after lights-off at 20 and 25 ℃,the timing of the primary peaks at 10 and 15 ℃ showed a latency of a few hours following lights-off,indicating the inhibiting effect of low temperature on the eels' activity.     

中国对虾镰刀菌病的细胞病理研究

本文报导中国对虾养成期病原体茄类镰刀菌Fusarium solani(Mart)的细微结构及其引起宿主的细胞病理变化,以便为该病的正确诊断和有效防治提供依据。     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

油田高含水期基于微观渗流机理的宏观岩心水驱油数值模拟研究

建立地层孔隙网络模型描述微观孔喉特征,利用逾渗方法计算基于微观渗流机理的相对渗透率曲线,并将之应用到数值模拟计算中,给出考虑微观渗流特征的方程,并进行数值求解,得到地层中流体分布特征。实例分析表明该方法可以得到基于微观特征的剩余油分布数量和形式,为调剖堵水、化学驱提供技术参数,实现微观渗流机理与宏观计算的结合。     

仿刺参水溶性海参皂苷的分离制备及抗真菌活性的研究

利用海洋生物资源进行天然抗真菌新药的开发,从冻干海参加工废液中提取了水溶性海参皂苷,并对其抗真菌活性进行了研究。采用大孔吸附树脂法提取水溶性海参皂苷,经Libermann Burchard反应等对提取物的性质进行鉴定后,利用管碟法对所得提取物的抗菌活性进行了测定,并利用琼脂稀释法测定了所得水溶性海参皂苷对6株供试真菌的最低抑菌浓度(MIC)。提取物在Molish反应、沉淀反应和泡沫实验中均为阳性,说明提取物中确含有皂苷类成分;在Libermann Burchard反应中,液体的颜色处在红色与紫色之间,显示提取物可能是1种三萜类皂苷。水溶性海参皂苷对6株供试真菌均具有显著的抑制作用,且在浓度为0.5~4 mg/mL的范围内,其抑菌活性与所用浓度之间呈明显的正相关性;在浓度为4 mg/mL时,水溶性海参皂苷对6株供试真菌抑制活性的大小依次为裂殖酵母菌、啤酒酵母菌、白色念珠菌、葡萄炭疽病原菌、黄瓜枯萎病原菌和黑曲霉,海参皂苷对6株真菌的MIC值依次分别为0.002,0.016,0.063,0.063,0.125,0.250 mg/mL。     

广东红海湾、珠江口及电白—阳江近海第四纪沉积

根据物探和钻探资料，研究区内第四纪沉积物可分为两部分，下部地震反射结构复杂，斜层理发育，粒度较粗，为晚更新世产物；上部的地震反射结构简单，呈水平状或近水平状结构，粒度较细，为全新世沉积。