Equipment and procedure improvements for a lightweight,inexpensive, percussion core sampling system

This paper describes improvements for an inexpensive, lightweight percussion core sampling system and presents examples of recovered core. The system has proven most effective in remote settings where the weight of a coring system may be a constraint. Cores of up to 5.5 m in length have been recovered and the system has functioned successfully in water depths to 200 m. The system weighs approximately 25 kg and costs less than $450.00 (US).The percussion corer is designed for operation from a stable ice-pack surface. The core barrel assembly is lowered through the water column and driven into sediment with a weighted driver. A secondary line is used to raise and drop the driver. The driver is guided to the core barrel assembly by the main line. Cores are retrieved by a simple pulley system anchored to the ice pack.     

Distribution coefficients of210Pb and210Po in laboratory and natural aquatic systems

We have measured the distribution coefficient (Kd) of²¹⁰Po and²¹⁰Pb in laboratory systems and in natural freshwater systems. In the laboratory systems, an inverse relationship was observed between the particle concentration of sand or lake sediment, and the distribution coefficients of²¹⁰Po and²¹⁰Pb. The slope of the log-linearK _d vs particle concentration relation is consistent with existingK _d-particle concentration theories. These laboratory observations are consistent with similar measurements in two lakes. TheK _d values of Po and Pb for the bottom sediment-pore water system with a high particle concentration were 10 to 100 times lower than those for dilute concentrations of particles suspended in the lake water. TheK _d of²¹⁰Pb in the sediments was >10⁴ so that the diffusive transport of²¹⁰Pb has only a small influence on the interpretation of²¹⁰Pb concentration-depth profiles and the²¹⁰Pb dating of these sediments.This is the second of a series of papers to be published by this journal following the 20^th anniversary of the first application of²¹⁰Pb dating of lake sediments. Dr P. G. Appleby is guest editing.     

Interpretation of210Pb profiles and verification of the CRS dating model in PIRLA project lake sediment cores

This paper reports results and analysis of²¹⁰Pb-activity measurements in 51 lake-sediment cores from 32 lakes in the four PIRLA (Paleoecological Investigations of Recent Lake Acidification) project regions (Adirondack Mountains [New York], Northern New England, Northern Florida, and the Northern Great Lakes States). General application of the Constant Rate of Supply (Constant Flux) model for²¹⁰Pb dating is valid for lakes in the PIRLA study, although application of the model is equivocal in a few lakes.²¹⁰Pb inventories and profiles are replicable among closely spaced cores within a lake. Specific²¹⁰Pb activity in surface sediments is negatively correlated with bulk sediment accumulation rate in seepage lakes, but not in drainage lakes. Drainage lakes with lower pH have lower unsupported²¹⁰Pb inventories in sediments, but the relationship does not occur in seepage lakes.²¹⁰Pb profiles in only seven of the cores, all from either the Adirondacks or the northern Great Lakes states, exhibit exponential decay curves. Deviations from an exponential profile include a flattening of the profile in the top few cm or excursions of one or a few measurements away from an exponential curve.²¹⁰Pb dates typically agree with other chronostratigraphic markers, most of which are subject to greater uncertainty. Several hypotheses, including sediment mixing, hydrologic regime, sediment focusing, and acidification, are proposed to explain variation of²¹⁰Pb distribution among lakes and regions. Hydrologic factors exert control on unsupported²¹⁰Pb inventories in PIRLA lakes, and there is a strong focusing effect in drainage lakes but a weak focusing effect in seepage lakes.This is the third of a series of papers to be published by this journal following the 20^th anniversary of the first application of²¹⁰Pb dating of lake sediments. Dr P. G. Appleby is guest editing this series.     

Spatial uniformity of sediment accumulation in varved lake sediments in northern Sweden

As part of an investigation aimed at assessing the potential of northern Swedish varved lake sediments for fine-resolution reconstruction of past climatic conditions, the following questions were addressed; how representative is a single core, does the appearance of varves change as the sediment ages, and how can varve thickness and within-varve structures be digitized? Analyses of replicate cores from Kassjön, using sample sequences of seasonal, annual and centennial time resolution, show that spatial variability of sediment accumulation in the varved sediment is very low. Comparisons of intensity curves from image analysis of freeze cores of recent sediments from Lake Nylandssjön, sampled in 1980 and 1985, indicate that the varves acquire their appearance at the sediment-water interface during sedimentation and that the varve structures are preserved during diagenetic processes. Measurement of varve thicknesses with a tree-ring microscope and with image analysis gave similar results. However, with image analysis, within-varve structures such as colour variations and thicknesses of seasonal layers, can also be recorded, increasing the possibilities for palaeolimnological and palaeoclimatic inferences.     

SETTLING PROPERTIES OF COHESIVE AND NON-COHESIVE PARTICULATE MIXTURES IN WATER

1. INTRODUCTIONAs a wide range of size distirbution including usually a certain POrtion of cohesive material is thecommon feature of the sediment constituting hyperconcentrated flows. it is desirable to study the settling properties of mixtures of cohesive and non--cohesjve sediment particles at high concentrations.Past studies on the settling of discrete particles in a suspension of fine cohesjve sediment is scarcein the literature. The Sediment Research Laboratory of Tsinghua Universi…     

Mapping and geochemical characterization of the Toarcian organic matter in the Mediterranean Tethys and Middle East

Organic matter from Toarcian outcrops and boreholes in several basins around the Mediterranean Sea and Middle East has been studied. Rock-Eval pyrolysis, elemental analyses of kerogens and gas chromatography of chloroform extracts within these different basins have been used to determine the amount, petroleum potential and type of the organic matter. The results have been used to compile a mapping of the organic matter for the Toarcian stage, which shows heterogeneities in the distribution and type of organic matter:

1. (1) Marine organic matter (type II) occurs in different environments of deposition. Whereas high contents (>5% total organic carbon) correspond to thick deposits within the West European realm (Great Britain, North Sea, Paris Basin and Germany), the organic matter is less abundant in the Mediterranean area where lower concentrations (1–2% TOC), preserved in Lower Toarcian thin levels, are limited only to restricted basins (northern Italy, Greece).

2. (2) The predominance of continental organic matter (type III) along the northern margin of the Tethys corresponds to a deltaic environment.

3. (3) There is a predominance of altered organic matter within the carbonated platforms around the Mediterranean Tethys.

These results, supplemented with the data issuing from the literature, add a geochemical dimension to the paleogeography of the Tethys.     

Assessment of reliability in water distribution networks using entropy based measures

Entropy based expressions for measurement of reliability and redundancy have recently been reported. These measures approach assessment of the reliability of the distribution network from the intrinsic redundancy of the network layout. The paper extends earlier work on entropy functions by including a more explicit statement of the alternate paths available in the network and by recognizing that under certain circumstances, e.g., failure of some part of the network work, an outflow link from a node under normal working condition may become an inflow link to the same node. The measures are assessed by comparison with parameters measuring Nodal Pair Reliability and percentage of flow supplied at adequate pressure for a range of networks and link failure conditions in this networks. The entropy measures are shown to reflect changes in the network reliability, as measured by these two comparative parameters, very well.     

On the distribution of flood volume in partial duration series analysis of flood phenomena

A methodology based on the theory of stochastic processes is applied to the analysis of floods. The approach will be based on some results of the theory of extreme values over a threshold. In this paper, we focus on the estimation of the distribution of the flood volume in partial duration series analysis of flood phenomena, by using a bivariate exponential distribution of discharge exceedances and durations over a base level.     

The first and the second e of the extreme value distribution,EV1

In the peak over threshold model resulting in the Extreme-value distribution, type I, (EV1) the firste of the distribution function is based on the Poisson number of exceedances, and the seconde arises from the Exponentially distributed magnitudes.This paper, on the one hand, generalises the Poisson model to the (positive and negative) Binomial distribution, and, on the other hand, the Exponential distribution is generalised to the Generalised Pareto distribution. Lack of fit with respect to the Poisson and Exponential distribution is measured by statistics derived from those which would be locally most powerful if the estimates of the location and scale parameter were equal to the true parameter values. Ways of combining both statistics are discussed.