2D stabilised analytic signal method in DC pole-pole potential data interpretation

Using analytic signal method, interpretation of pole-pole secondary electric potentials due to 2D conductive/resistive prisms is presented. The estimated parameters are the location, lateral extent or width and depth to top surface of the prism. Forward modelling is attempted by 2D-Finite Difference method. The proposed stabilised analytic signal algorithm (RES2AS) uses Tikhonov’s regularization scheme and FFT routines. The algorithm is tested on three theoretical examples and field data from the campus of Roorkee University. The stability of RES2AS is also tested on synthetic error prone secondary pole-pole potential data.     

路用探地雷达的应用技术研究进展

有效、无损、快捷、简便是公路检测技术发展的方向，当前国内外先进的浅层勘探技术——路用探地雷达检测，以其无损、快捷以及浅层高分辨率的优势被迅速应用于公路检测。本文对近年来路用探地雷达技术的发展及应用情况进行了介绍，详细分析了探地雷达的工作原理、系统组成结构。就探地雷达在公路建设、维护过程中的应用情况进行了系统总结。     

Surface chemical analysis in coal preparation research: complementary information from XPS and ToF-SIMS

The application of X-ray photoelectron spectroscopy (XPS) to coal surface characterisation for preparation research is described. Progress towards the acquisition of complementary surface chemical information by time-of-flight secondary ion mass spectrometry (ToF-SIMS) is also discussed. Surface-based beneficiation techniques such as flotation are assuming greater importance as the proportion of fines in raw coal increases due to the proliferation of high capacity mining methods. A necessary condition for the floatability of a coal particle is adequate hydrophobicity, and the degree of hydrophobicity of the flotation concentrate is one factor influencing the ease with which its dewatering can be affected. The hydrophobicity of a coal is very difficult to measure directly because of microporosity, and it is often necessary to deduce the degree of hydrophobicity from a knowledge of the surface chemistry. XPS is able to provide sufficient analytical data to allow relative levels of hydrophobicity to be estimated. In principle, ToF-SIMS should be able to supply additional information enabling refinement of such estimates; however, there are insufficient data at present to allow the ionic fragments detected to be related to specific functional groups at the coal surface.     

A Study on Organic Inclusions in Clastic Reservoir Rocks and Their Application to the Assessment of Oil and Gas Accumulations

Terrigenous clastic reservoir rocks are widespread in China,and nearly all the industrial oil and gas accumulations in eastern China occur in the clastic rocks.The study shows that organic inclusions are mostly distributed in the secondary fissures and pores which were ormed in the process of oil-rock interaction,rather than in the cements or secondary enlargements. The organic inclusions are dominantly organic gas-rich or are composed of pure hydrocarbons.Homogenization temperatures range mainly from 120℃ to 130℃，which shows a relatively high maturity of organic matter.Vertical and horizontal temperature changes provide the grounds for the investigation of basin evolution and thermal fluid-kinetics-model.Fluorescence spectral characteristics o the organic inclusions indicate that oils and gases in the area studied probably have experienced two-stage or two-time migration.Micro-fluorescence rescearch is one of the effective approaches to oil/source correlation and oil migration-stage determination.The abundance and occurrence of organic inclusions is one of the indicators of oil and gas abundance and accumulation in rock layers.With the help of other informatio,organic inclusions can provide the basis for the prospective assessment of oil and gas in clastic reservoir rocks.     

Simulations of a coupled hydro-chemo-mechanical system in rocks

A coupled hydro-chemo-mechanical numerical model is developed for these coupled phenomena in many engineering fields. The model has been applied to predicting the response of a stressed rockmass column to an injected reactive fluid (reagent) flow. The response includes evolutions of porosity, permeability, reagent and mineral concentrations during dissolution. In the model, the progress of dissolution is defined by the change in porosity ratio and the porosity increases with dissolution assuming there is no precipitation. The numerical evolutions of porosity, permeability, reagent and mineral concentrations during dissolution are validated against steady state solutions. The model results show that these evolutions are regulated to a certain extent by the applied external loadings: an applied extensional stress enhances the progress of the dissolution process while an applied compression stress slows the progress of the dissolution process. This revised version was published online in July 2006 with corrections to the Cover Date.     

The role of moisture cycling in the weathering of a quartz chlorite schist in a tropical environment: findings of a laboratory simulation

Long‐term weathering of a quartz chlorite schist via wetting and drying was studied under a simulated tropical climate. Cubic rock samples (15 mm × 15 mm × 15 mm) were cut from larger rocks and subjected to time‐compressed climatic conditions simulating the tropical wet season climate at the Ranger Uranium Mine in the Northern Territory, Australia. Fragmentation, moisture content and moisture uptake rate were monitored over 5000 cycles of wetting and drying. To determine the impact of climatic variables, five climatic regimes were simulated, varying water application, temperature and drying. One of the climatic regimes reproduced observed temperature and moisture variability at the Ranger Uranium Mine, but over a compressed time scale. It is shown that wetting and drying is capable of weathering quartz chlorite schist with changes expected over a real time period of decades. While wetting and drying alone does produce changes to rock morphology, the incorporation of temperature variation further enhances weathering rates. Although little fragmentation occurred in experiments, significant changes to internal pore structure were observed, which could potentially enhance other weathering mechanisms. Moisture variability is shown to lead to higher weathering rates than are observed when samples are subjected only to leaching. Finally, experiments were conducted on two rock samples from the same source having only subtle differences in mineralogy. The samples exhibited quite different weathering rates leading to the conclusion that our knowledge of the role of rock type and composition in weathering is insufficient for the accurate determination of weathering rates. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of suction on the mechanical behaviour of iron ore rock

The effect of suction on the behaviour of iron ore has been studied from both physical and mechanical points of view. The porosity and the suction phenomena have been analysed using different experimental techniques. Uniaxial compressive tests on partially saturated samples have shown that the suction is responsible for strength and cohesion improvement. Considering the theory of partially saturated porous soils of Coussy and Dangla (Mécanique des sols non saturés (2002 edn). Hermès Science: 2002; 390), we have proposed a constitutive law for partially saturated iron ore. The real increase in the apparent cohesion due to the capillary attraction forces is overestimated if the yield function is written in terms of effective stresses. The effect of the capillary cohesion has been modelled with a function in the expression of the apparent cohesion of the yield function. The effect of suction on the mechanical behaviour has been represented in the effective stresses space and in the total stresses space like the Alonso model (Géotechnique 1990; 40 :405–430). Copyright © 2005 John Wiley & Sons, Ltd.     

低孔低渗储层渗透率测井解释模型研究

采用岩心分析数据与测井曲线相结合的方法,引入泥质含量参数配合声波时差进行多元线性回归分析。建立鄂尔多斯盆地研究区低孔低渗储层渗透率测井解释模型。根据泥质含量特征二次分类后进行多元线性回归,建立两个渗透率测井解释模型相关性良好,对应于研究区两种不同的沉积微相特征;测井解释渗透率与岩心实测渗透率匹配良好,解释模型满足研究区精度要求。在沉积微相背景约束条件下,对研究区储层选择合理参数多元线性回归建立渗透率测井解释模型,可以使低孔低渗储层渗透率解释达到良好应用效果。