论三峡工程对洞庭湖区土壤潜育化和沼泽化的影响

三峡工程完工后，在坝下长江水位抬高的季节里，顶托洞庭湖的排泄，使东、西洞庭湖地段地表、地下水位相应抬高，对这些地区土壤的潜育化和沼泽化有明显影响，农业部门应引起重视。     

Permeability of stratified sands

Summary The permeability of graded sands was studied in the laboratory to determine the influence, if any, of stratification order on permeability (i.e. the position in which finer or coarser layers occur in the flow path). The evidence suggests that the order of stratification does not influence the order of magnitude of permeability of a sand. This order of magnitude is determined by the fine fraction of the sand. However, the order of stratification does have an influence on the finer details (i.e. variation within the same order of magnitude) of permeability. In this regard, an unsorted sand (all fractions mixed together) has the lowest permeability while a sorted one that has the fine fraction at the end of the sequence has the highest vertical permeability. It is also concluded that empirical formulae that use only the effective size, D ₁₀, to estimate permeability yield results that are comparable with those that incorporate sorting in their formulae. However, experimental results show that these formulae do not yield reliable results when used for more denser sands.     

中国红土的研究与地基承载力的评价

通过广泛的工作，着重研究了不同成因类型红土的物质组成和结构特征，决定红土工程地质性质的主要因素是游离氧化铁、由于不同种类、不同形态游离氧化物的大量存在使红土在高含水率和高孔隙比情况下具有较高的强度，因此红土的地基承载力标准值不能与一般粘性土等同时待，还介绍了如何提高地基承载和和确定标准值的方法。     

武夷山古环境的变迁与土壤发育的关系

在综合研究了武夷山主峰黄岗山的地质、地貌、植被、气候及第四纪孢粉分析资料后认为,黄岗山在晚第三纪至第四纪的数百万年间,曾经历了至少三次断块抬升运动,每次抬升幅度300—400m,总上升量可达千米之巨。黄岗山的土壤之所以在若干重要分类指标上产生变异,其原因很可能是古环境遗留的特征仍居主导地位,近代成土作用只不过是在原来脱硅富铝化基础上的附加成土过程。     

双峰县金坑冲金矿地质特征及找矿前景

本文概述了金坑冲金矿地质特征,并对其矿化规律作了总结。在此基础上,依据地质类比与土壤地球化学测量成果,指出王家湾一丫头山一带,是找石英脉一蚀变岩型金矿的远景区。     

关于固结度计算的一点看法

通过探寻渗透系数、压缩系数(或体积压缩系数)与孔隙比在固结过程中的变化规律来确定固结系数与固结时间的关系并将其用于固结度计算是无益的,原因在于固结度计算公式只在固结系数为常数时才成立。     

青海湖人湖沙质物的计算与水下沙堤的形成

青海湖流域沙漠以环湖分布为特点,又以ENE为集中。这一状态使多方向的风沙流入湖,而实际上入湖沙量是以W、N、E三个方向的流沙为主。根据入湖风沙公式计算,入湖风沙量为887.08×10~4t/a。并推算出河流泥沙入湖为35.77×10~4t/a,空中降尘为30.36×10~4t/a。入湖后的沙质物在湖流、波浪的作用下,由西向东运移,堆积成水下沙堤,逐渐增高加宽露出水面,分隔成子湖。同时在干燥的气候作用下,导致湖面收缩,生态环境恶化。     

BED FORMS AND RESISTANCE PROPERTIES OF LIGHT-WEIGHT BED MATERIAL

I. INTRODUCTIONResistance to flow in alluvial streams is one of the crucial problems in fluvial hydraulics. Despite that large amount of studies have been conducted for centuries, no perfectmethod describing and calculating the resistance to flow in alluvial streams is availablehll now. Investigation on bed forms and resistance properties of light--weight bed materials is even more scarce. USWES (1936) has conducted systematic experiments onlight--weight materials in a flume & m long an…     

Hydrofracture mechanisms in rock during pressure grouting

Summary Hydrofracture Mechanisms in Rock During Pressure Grouting. The paper examines the basic meachnisms controlling the initiation of fractures in rocks and layered soils during pressure grouting, and their subsequent propagation into the ground mass. Previous analyses of fracture initiation have tended to concentrate on simplified models in which the ground is treated as an impervious elastic or Mohr-Coulomb continuum. The present method allows for the porous or fissured nature of the ground by considering the effect of seepage forces induced by the pore pressure gradient. The effect is quantified by use of a parameterN such that the ratio of fluid force used in expanding the injection hole, to that used in forcing fluid through void spaces, isN to (1—N).Analysis of hydrofracture propagation is based on stress analysis of a borehole in an elastic continuum, the propagating fracture zone around the borehole being represented as a non-elastic material governed by the Mohr-Coulomb failure criterion. This is supplemented by an energy approach which equates the energy supplied to the ground from the injection pump, with the energy stored in the ground and the energy necessary to fracture it.

---

Zusammenfassung Brucherscheinungen im Fels bei Verprearbeiten. In der Arbeit wird der grundlegende Mechanismus untersucht, welcher bei Verpreßarbeiten in Fels und geschichtetem Boden zur Einleitung und Ausbreitung von Brüchen führt. Frühere Untersuchungen des Bruchbeginns stützten sich im wesentlichen auf vereinfachte Modelle, in denen der Untergrund als undurchlässiges Kontinuum angesehen wird, das entweder elastisch ist oder der Mohr-Coulombschen Bruchbedingung genügt. Die neue Methode berücksichtigt dagegen eine Porosität oder Klüftung des Untergrundes durch Ansatz der vom strömenden Medium auf das Gebirge ausgeübten Belastung. Diese Belastung wird aufgeteilt in einen Druckverlust an der Bohrlochwand (gleich ParameterN mal Verpreßdruck) und die entsprechende, über den gesamten durchströmten Bereich verteilte Belastung.Die Untersuchung der Bruchausbreitung geht von der Spannungsermittlung um ein Bohrloch in einem elastischen Kontinuum aus, wobei in der sich ausbreitenden Bruchzone um das Bohrloch herum nichtelastisches Material angenommen wird, das dem Mohr-Coulombschen Bruchkriterium genügt. Zur Ergänzung dient eine Energie-Betrachtung, bei der die von der Injektionspumpe abgegebene Energie gleichgesetzt wird der im Untergrund gespeicherten Energie und der aufgewendeten Brucharbeit.

---

Résumé Les mécanismes de la fracturation hydraulique dans les roches pendant les injections sous pression. Le mémoire examine les mécanismes fondamentaux qui gouvernent l'initiation des ruptures dans les roches et les sols stratifiés, au cours des injections et leur propagation dans les massifs. Les analyses antérieures de l'initiation de la rupture, se sont concentrées sur des modèles simplifiés où l'on considérait la roche comme un milieu élastique et imperméable, ou comme un milieu de Mohr-Coulomb. La présente méthode admet que le massif est poreux ou fissuré, en considérant l'action des forces de percolation engendrées par le gradient de pression interstitielle. Cette action est quantifiée par un paramètreN, tel que le rapport de la force du liquide employée à dilater le forage d'injection, à celle employée pour forcer le coulis à travers les vides soitN/(1—N). L'analyse de la propagation des ruptures se base sur l'analyse des contraintes autour d'un forage dans un milieu élastique, alors que la zone de la rupture qui se propage autour du forage est représentée par un milieu non-élastique admettant le critère de rupture de Mohr-Coulomb. Cette analyse est complétée par une approche énergétique, où l'énergie qui est fournie au massif par la pompe d'injection est égalée à l'énergie emmagasinée dans la roche et à l'énergie de rupture.

---

Nomenclature A area of new cracks created per unit volume of time t - E total work done by injection fluid - E _i irrecoverable component of energy - E _{i c} work done in fracturing rock or soil - E _{i l} work done to overcome various frictional forces in grouting system - E _{i p} work done to cause plastic deformation of fractured zone - E _{i s} work done to overcome shear strength of fluid during flow - E _{i v} work done to overcome frictional drag between fluid and rock in soil surfaces during flow - E _r recoverable component of energy - E _{r f} elastic strain energy stored in fluid - E _{r s} elastic strain energy stored in rock or soil - h height of overburden - i j 1, 2, 3 - K ₀ coefficient of horizontal earth pressure - k permeability of ground to grout - L length of cylindrical grout source - n rock or soil porosity - p average fluid pressure between timet and (t + t) - p ₀ injection pressure - R radius of grout front - r radial distance from borehole axis - r ₀ radius of borehole - r ₁ radius of fractured zone - S specific surface area of rock or soil - S _T tensile strength of rock or soil - t time - u grout seepage velocity - V volume of grout injected - v volumetric strain - specific surface energy of rock - bulk density of rock or soil - _{i j} ^e elastic strain increment tensor - _{i j} plastic strain increment tensor - v Poisson's ratio - _{i j} average stress tensor in the ground during timet and (t + t) - _R , _T, _Z radial, tangential and vertical stresses induced by grouting - _r , _t , _z radial, tangential and vertical stress around borehole before grouting - grout shear strength - angle of internal friction of rock or soil With 7 Figures     

红壤退化中的土壤质量评价指标及评价方法

土壤质量评价与监测是评价土壤退化的重要工作,也是重新设计持续性的土壤管理系统的基础。目前缺乏统一的评价指标以及将各项土壤性质与土壤管理措施结合起来的评价方法。本文首先提出了选择红壤质量评价指标的原则,并从化学、物理学和生物学三个方面初步探讨了评价红壤质量动态变化可资采用的指标体系,综述了国内在南方丘陵区红壤质量演化的研究中应用的指标;最后从土地评价方法中选择了可用于红壤质量评价的方法,并简要综述了国际上最新的土壤质量评价方法。