南黄海辐射沙洲主要潮沟的变迁

利用1966年和1977年海图、1995年和2000年合成孔径雷达影像,结合1980年以来的陆地卫星影像和2000年的岸滩实测剖面资料对南黄海辐射沙洲区主要潮沟的位置进行了解译与分析,得出上述4个时期研究区内主要潮沟深泓线位置图。对不同时期潮沟深泓线位置图进行几何校准与叠加,对比潮沟深泓线的迁移。结果表明：潮沟具有往返周期性摆动的特点,短期摆动速度明显快于长期摆动,主沟槽最大变动速度达127m／a,而支沟槽变动速度更大。潮沟摆动与沙洲变化有明显的相关性,但两者间的关系较为复杂。辐射沙洲目前处于破碎、萎缩阶段,除沙洲中心及陆岸岸滩仍有淤积外,大部分沙洲处于侵蚀状况,同时沙洲有整体向陆迁移的趋势。     

石家庄地面水回渗地下过程的氮行为影响试验研究

石家庄是我国北方地下水位下降较大的城市之一,利用其毗邻滹沱河宽阔河滩,地面水可直接入渗补给地下水的有利水文地质条件,实施地面水回渗地下工程,将具有现实意义.为探索地面水回渗后的水质变化,该文针对地面水在回渗过程中对水质起限制性影响的氮行为作用进行了模拟试验研究.结果显示,利用2 m厚的滹沱河细砂土及与粘土按一定比例的混合砂土层,可对间歇式实施地面水回渗中的铵氮组分形成一定容量的截留去除,并且该截留量又在随回渗次数的增加而缓慢下降,当采用人工增加环境碱度及湿度的办法后可消除这种下降.同时,还显示对回渗水中硝酸氮的去除率不高,但若采用人工添加乙醇碳源和接种优势脱氮微生物菌种方法,硝酸氮的去除率将会得到较大提高.     

Ancient and modern cold-climate aeolian sand deposition: A review

Although partly active aeolian sand sheets and dunes cover large areas in the zones of (dis)continuous permafrost, little precise information is available about the influence of cold-climate conditions on modern aeolian processes. This means that palaeoenvironmental reconstructions in the stabilised, mainly Late Pleistocene dune fields and cover sand regions in the ‘sand belts’ of the European Lowlands and the Northern Great Plains of the USA and Canada, are necessarily still based on ancient evidence. Cold-climate wind deposits are typically derived from areas of abundant sediment supply like unvegetated flood plains, glacial outwash plains, till plains and lake shores. The common parabolic and transverse dune forms resemble those observed in temperate regions. Although a variety of periglacial features has been identified in Late Pleistocene dune and cover sands none of them indicate that permafrost is crucial to aeolian activity. Specific structures in aeolian strata permit tentative interpretation of the moisture content of depositional sand surfaces, the nature of annual sedimentation cycles and the processes by which strata were deposited and/or contorted. But surprisingly little is known about the role of vegetation in the process of sand accumulation. Dunes are most informative with respect to reconstructions of past wind regimes, which offer important data for verification of palaeoclimatic simulations.     

Effect of sand on the vacuum consolidation of dredged slurry

Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.     

Response and capacity of monopod caisson foundation under eccentric lateral loads

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.     

Lateral cyclic response of an aluminum model pile in sand

Lateral cyclic load tests were performed on an aluminum model pile in dry sand. Two levels of loading were adopted to represent different service load conditions. The maximum number of loading cycles was 1,000. From the test results, it was found that the even though in the service load condition, the pile response was still affected by cyclic effects and a larger load level would produce more significant influence. In a global point of view, the lateral displacement and maximum moment increased with loading cycles, while the secant stiffness within a cycle decreased with cycles. The cyclic effect was more significant on the lateral displacement than on the moment. In a local point of view, cyclic loading would degrade the equivalent subgrade stiffness for the soil shallower than about seven times diameter. In addition, the secant subgrade stiffness within a cycle increased with loading cycles. Some experimental relationships of lateral pile response and loading cycles were built and compared with those in the literature.     

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.     

Explicit stress–strain equations for modeling frictional materials

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.     

东濮凹陷岩性油气藏勘探方法初探

岩性油气藏已成为渤海湾盆地内各凹陷重要的勘探对象。笔者根据对东濮凹陷形成演化、沉积特征的研究，结合油田下洼勘探的需要，提出了断层分析法进行岩性油气藏勘探，总结出3种模式，经在多个地区应用取得了较好的效果。该方法立足于构造对沉积的控制作用和地震资料对断层的识别能力高于对砂体的分辨能力，操作简便、实用，对断陷盆地的深化勘探具有指导意义。     

珠江磨刀门水道咸潮上溯加剧的原因

对磨刀门水道不同年份地形资料和多年枯季潮位资料进行了对比分析,结果表明:大规模的河床采砂,引起磨刀门上游河段河床大幅下切,河道深泓平均加深0.59~2.25 m,河槽容积平均增加8.91×106~12.11×106m3,使该河段枯季潮差增大,进潮量增加,潮汐动力增强,导致咸水界向上游河段推移;口门围垦整治后,磨刀门口门区由众多岛屿环抱而成的内海区变成人工导堤控制的"一主一支"两条水道,水域面积减少了80%,河槽容积减少了40%,深槽趋于顺直加深,使口门区的"调淡"作用消失,这是咸潮上溯的重要原因;根据多年水文频率分析,发生严重咸潮灾害时,西、北江枯季流量并非都是枯水流量,因此枯季上游来水量变化并不是近年来咸潮灾害加剧的主要原因。