加蓬海岸盆地南、北次盆成藏特征对比

加蓬海岸盆地属于被动大陆边缘盆地。盆地沉积盖层主要由白垩系、古近系和新近系组成,沉积地层组合具有明显的三分性,包括早白垩世盐下层系、早白垩世晚期阿普特期盐膏层和晚白垩世至新近纪盐上层系。根据目前的油气发现,北加蓬主要富集盐上油气资源,南加蓬主要富集盐下油气资源。从构造沉积背景、油气地质条件、油气发现规模、油气平面分布、油气勘探潜力5方面对南、北次盆进行对比,分析南、北次盆的油气聚集差异,结合勘探现状分析其勘探潜力,并指出南加蓬次盆勘探难点为圈闭识别,北加蓬次盆的勘探难点是砂体预测。     

不同介质底床上的波浪衰减

采用近年来的研究成果比较了良在不同介质底床上传播时的波浪衰减规律,对不同介质底床上的波浪衰减机理进行了总结,推荐了计算波浪衰减的公式和方法,根据实验和计算结果解释淤泥质海岸可能存在的波浪传播现象。     

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.     

辐射沙脊主要水道的演变特征及其水动力机制研究

近四十年来的水下地形资料对比显示：南黄海辐射沙洲区水道普遍存在逐渐向南偏移的趋势（西洋主槽冲深、南延,南翼烂沙洋水道、小庙洪水道向南逼进）。有关辐射沙洲整体南移的原因及机理虽有诸多猜想,但至今没有统一可靠的认识,这种趋势性过程的驱动力成为辐射沙洲区海岸冲淤动态研究及港口建设过程中亟待解决的问题。在恢复黄河北归以来苏北黄河三角洲海岸不同发育阶段的岸线位置和水下地形的基础之上,通过所建立的潮波数学模型,研究了在苏北黄河三角洲不同演变阶段南黄海潮波系统的特征及水动力变化。研究表明,随着岸线后退和水下三角洲的夷平,辐射沙洲地区潮差不断增大;水动力不断加强,而且加强的区域逐渐向南偏移,这种大范围区域性水动力主轴的向南偏移就有可能是导致辐射沙洲整体南移的主导因素之一。     

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.     

Evaluation of Liquefaction Potential Index Along Western Coast of South Korea Using SPT and CPT

For South Korea, liquefaction potential along the western coast has not been widely assessed because South Korea is considered to be a low seismic hazard. However, recent earthquake events and historical records indicate that the seismic hazard of South Korea should not be ignored. Moreover, as artificial fills are extensively used along the western coast for development, liquefaction evaluation of the soils in this area is necessary. In this paper, we present: (1) the seismic characteristics of the study area; (2) procedures for evaluating liquefaction potential, focusing on the liquefaction potential index (LPI) approach; and (3) LPI distributions at several representative locations along the western coast of South Korea under various seismic scenarios. The liquefaction potential index represents the liquefaction potential over the upper 20 m of a boring or sounding. Using cone penetration test (CPT) and standard penetration test (SPT) data from two coastal sites, we compare and discuss CPT-based and SPT-based LPI values, particularly values computed in nonplastic, silt-rich soils. In these soils, it appears that the CPT yields lower liquefaction resistance, resulting in large LPI values. Finally, discussion and suggestions are provided for CPT- and SPT-based liquefaction assessment of low plasticity and high fines content soils.     

Seismic geomorphology,architecture and genesis of Miocene shelf sand ridges in the Pearl River Mouth Basin,northern South China Sea

Multiple stages of large-scale shelf sand ridges, including the shoreface-attached and the offshore types, have developed in the Miocene successions on the mid-shelf region of the Pear River Mouth Basin, northern South China Sea. Utilizing a high-quality 3D seismic data set, accompanying 2D seismic profiles and well logs, the morphology, architecture and genesis of these shelf sand ridges have been systematically investigated in this study. The ridges are of very large scale, with the largest one having a maximum height of 64 m, a width of more than 20 km and a length of 37 km within the 3D survey area. Being mound-shaped, they also display obvious asymmetry character, with the ridge crest preferentially located on the SE side. Three main internal components, including the ridge front, central ridge and the ridge tail, have been recognized through careful anatomy analysis of the two most well-imaged ridges, each displaying distinct expressions on seismic amplitudes and geometries. In the plan view, most of the shelf sand ridges are generally NE–SW oriented and widening to the SW direction. Scouring features can also be clearly observed along the SW direction, including scour depressions and linear sandy remnants. On well logs, the shelf sand ridges are represented by an overall coarsening-upward pattern. Intervals with blocky sandstones are preferentially present on higher locations due to a differential winnowing process controlled by shelf topography.Plenty of evidence indicates that these ridges were primarily formed by the reworking of forced regressive or lowstand deltaic deposits under a persistent southwesterly flowing current during the subsequent transgression. This very current is a composite one, which is speculated to consist of winter oceanic current, SCSBK (South China Sea Branch of Kuroshio) intrusion onto the shelf and internal waves propagating from the Luzon Strait. Tidal currents might have contributed to the SE growth of the ridge. In response to the reglaciation of Antarctic ice-sheet and the closure of Pacific-Indian ocean seaway in the middle Miocene, the intensification of the North Pacific western boundary current was considered to have potential links to the initiation of the shelf sand ridges at ∼12 Ma. The development of shelf ridges was terminated and replaced by rapid deltaic progradation at ∼5.5 Ma.     

淤泥质、粉沙质及沙质海岸航道回淤统一计算方法

根据20世纪80年代初提出的淤泥质海岸航道回淤计算方法的基础上,开展了拓展研究,使之统一适用于淤泥质海岸、粉沙质海岸及沙质海岸。主要研究内容有,在波浪和潮流综合作用下挟沙力含沙量研究中引入了特定的泥沙因子F1/F,从而挟沙力含沙量公式不仅适用于淤泥质泥沙,也适用于非淤泥质泥沙;在动力因素方面,除了一般寻常潮和波浪动力外,进一步考虑了风暴潮和破波的巨大掀沙能力造成航道骤淤的可能性。并结合连云港30万吨级主航道扩建及徐圩港区10万吨级航道的回淤问题(包括骤淤可能性问题),京唐港外航道和黄骅港外航道的骤淤问题,进行预测计算及校验计算,结果都是良好的。此外,对杭州湾强潮和涌潮情况下的挟沙力含沙量也进行了校验计算,结果也非常满意。     

Effects of Mudstone Particle Content on Shear Strength of a Crushed Sandstone–Mudstone Particle Mixture

The present study focuses on the shear strength, deformation, and particle crushing of sand which is mixed by crushed sandstone and mudstone particles. Two triaxial tests—one for unsaturated specimens and the other for saturated specimens—were performed, along with sieve analysis tests. Results obtained from the triaxial tests indicate that, with the increment of the mudstone particle content by weight, the angle of internal friction decreases, the cohesion increases and then decreases, and both the initial angle of shearing resistance at the atmospheric pressure and decremental angle increase and then decrease. Compared to the unsaturated specimens, the deviator stress or normalized deviator stress of the saturated specimens at the same axial stress may decrease due to the wetting action. Thus, the shear strength of the tested materials may be reduced by the wetting action. Results of sieve analysis tests indicate that the mixing of some mudstone particles into the sandstone particle mixture may reduce the amount of particle crushing, but the wetting action may increase the amount. The amount of the crushed particle may arrive at a minimum of 40% of mudstone particle content by weight.     

泥浆含砂率对桩基质量的影响

本文通过对泥浆中颗粒的沉降特性分析，从量上得出泥浆性能对泥浆中颗粒的悬浮携渣能力。泥浆是一流变性的流体，对泥浆性能的把握，应综合考虑，而不偏向于某个指标。提出了在实践中对泥浆的正确使用和泥浆性能取用的建议。