浙江省电子沙盘气象应用系统

用高程数据建立电子沙盘表面模型,并对高程数据、矢量数据和影像数据进行三维可视化处理,在三维场景中建立了渲染过的浙江省电子沙盘模型;以Microsoft.NET为开发平台,基于ArcGIS Engine构建了浙江省电子沙盘显示平台,实现电子沙盘的集成显示、基本地图操作、自动站叠加显示、属性查询、MICAPs第4类网格资料...     

CASM: a unified state parameter model for clay and sand

The purpose of this paper is to present a simple, unified critical state constitutive model for both clay and sand. The model, called CASM (Clay And Sand Model), is formulated in terms of the state parameter that is defined as the vertical distance between current state (v, p′) and the critical state line in v–ln p′ space. The paper first shows that the standard Cam-clay models (i.e. the original and modified Cam-clay models) can be reformulated in terms of the state parameter. Although the standard Cam-clay models prove to be successful in modelling normally consolidated clays, it is well known that they cannot predict many important features of the behavior of sands and overconsolidated clays. By adopting a general stress ratio-state parameter relation to describe the state boundary surface of soils, it is shown that a simple, unified constitutive model (CASM) can be developed for both clay and sand. It is also demonstrated that the standard Cam-clay yield surfaces can be either recovered or approximated as special cases of the yield locus assumed in CASM. The main feature of the proposed model is that a single set of yield and plastic potential functions has been used to model the behaviour of clay and sand under both drained and undrained loading conditions. In addition, it is shown that the behaviour of overconsolidated clays can also be satisfactorily modelled. Simplicity is a major advantage of the present state parameter model, as only two new material constants need to be introduced when compared with the standard Cam-clay models. © 1998 John Wiley & Sons, Ltd.     

深层砂泥岩储层继承性裂缝发育特征

西部挤压盆地内低渗性含油气砂泥岩储层构造运动期次多、埋藏深度大、泥质夹层多、高角度网状缝继承性发育,裂缝不仅是油气的有效运移通道,也是储层压裂开发效果的主要影响因素。选择西部天山山前某区块深层砂泥岩裂缝性气藏为研究区,以裂缝形成机制的探讨和研究为突破点,在岩心观察、CT层析成像扫描、成像测井解释的基础上,精细统计裂缝产状、开度、充填度,结合流体包裹体及古应力场划分裂缝发育期次,最后总结继承性裂缝的发育模式。研究结果表明,砂泥岩储层裂缝继承性缝的有利发育条件为多期次构造运动、低应力差、低逼近角度、适当泥质含量或低摩擦因数,岩性是内因,构造应力是外因。     

鄂尔多斯盆地北部塔巴庙地区与地层挠曲变形有关的构造裂缝分布定量预测

塔巴庙地区位于鄂尔多斯盆地北部伊陕斜坡构造带上,构造平缓,一般认为不具备裂缝发育条件.然而大量岩心观察、薄片分析、物性测试、测井及试井资料证实,研究区上古生界发育区域性分布的构造裂缝系统和与地层局部挠曲变形有关的局部构造裂缝系统.本文重点介绍与低幅度地层挠曲变形有关的裂缝预测方法,以及主要勘探层裂缝发育部位、发育程度和裂缝系统产状等成果.研究表明,地层挠曲变形主要发生于燕山期构造运动,喜马拉雅期对地层有一定改造作用.构造裂缝对致密储层储集性能作用意义不大,但对储层渗透率的改善作用明显.      

东海西湖凹陷平北地区表层沉积物特征及其成因初探

对研究区域的３７０个站位,１０８４个样品进行了粒度分析,对其中的部分样品进行了重矿物、古生物的分析和鉴定,发现东海西湖凹陷平片地区表层改造砂的特征与一般的规律有较大的差别,这种独特的表层沉积物特征的形成原因主要和所处的地貌部位有关。     

沉积物孔隙毛细管压力与甲烷水合物饱和度关系研究

To better understand the relationship between the pore capillary pressure and hydrate saturation in sediments, a new method was proposed. First, the phase equilibria of methane hydrate in fine-grained silica sands were measured. As to the equilibrium data, the pore capillary pressure and saturation of methane hydrate were calculated. The results showed that the phase equilibria of methane hydrates in fine-grained silica sands changed due to the depressed activity of pore water caused by the surface group and negatively charged characteristic of silica particles as well as the capillary pressure in small pores together. The capillary pressure increased with the increase of methane hydrate saturation due to the decrease of the available pore space. However, the capillary-saturation relationship could not yet be described quantitatively because of the stochastic habit of hydrate growth.     

Stability Study of a Tide Embankment Subjected to Sea Level Variations Using Centrifugal Model Tests

To investigate the behavior of dredged-sea-sand fill compacted inside tide embankments with a damaged geosynthetic mat, centrifugal model tests and numerical simulation were conducted, both considering variations in sea level. The results from the three centrifugal model tests demonstrate that the subsidence of the dredged-sea-sand fill inside tide embankments with a damaged geosynthetic mat was strongly affected by the loss of dredged-sea-sand into the filter layers with large particles and a decrease in the bearing capacity of the filter layers with small particles. In addition, a comparison of the test and simulation results confirms that the loss of sand into the filter layer and the subsidence of the dredged-sea-sand fill were well reproduced by the numerical simulation.     

HD-1注汽井新型防砂材料的研究与应用

孤岛油田属稠油疏松砂岩油藏,生产过程中油井出砂严重,现有的涂敷砂人工井壁防砂注蒸汽后强度较低,造成防砂成功率低,注汽后高强度采液生产周期较短。为此,通过室内试验,优选出耐高温树脂、高强度骨架颗粒、偶联剂、固化剂,进行室内配方优化试验,评价固结体耐高温性能,测定其渗透率,研制出一种适用于疏松砂岩油藏注蒸汽热采井的HD-1注汽井新型防砂材料。在孤岛油田稠油注蒸汽热采区共试验72口井,成功率为91.0%,截止目前,累计产油为121 572 t,单井平均有效期为233 d。现场应用表明：HD-1注汽井新型防砂材料耐高温、强度高,防砂成功率高,有效期长,能够有效改善注蒸汽热采井的防砂效果。     

秦皇岛A油田河流相储层展布特征

秦皇岛A油田位于渤海中部海域,区内油气藏主要发育在新近系的明化镇组。明化镇组下段为曲流河沉积地层,具有很强的非均质性,使得注水开发收效不均匀,平面矛盾突出。选取Ⅲ2砂体为研究对象,利用40余口钻井资料和覆盖油田的三维地震资料对储层内部结构和平面展布特征进行了系统的分析。研究认为,Ⅲ2砂体是由两期点坝砂体叠置而成,每一期砂体在平面上由4~5个单一点坝顺向组合而成,点坝之间的溢岸沉积是导致储层非均质性强的主要因素,控制了剩余油的分布。油田的生产动态证实,注入水流动规律与点坝砂体的平面展布具有良好的对应关系,部分井区水驱效果不均衡,个别单井产能低下都能从中找到原因。     

珠江磨刀门水道咸潮上溯加剧的原因

对磨刀门水道不同年份地形资料和多年枯季潮位资料进行了对比分析,结果表明:大规模的河床采砂,引起磨刀门上游河段河床大幅下切,河道深泓平均加深0.59~2.25 m,河槽容积平均增加8.91×106~12.11×106m3,使该河段枯季潮差增大,进潮量增加,潮汐动力增强,导致咸水界向上游河段推移;口门围垦整治后,磨刀门口门区由众多岛屿环抱而成的内海区变成人工导堤控制的一主一支两条水道,水域面积减少了80%,河槽容积减少了40%,深槽趋于顺直加深,使口门区的调淡作用消失,这是咸潮上溯的重要原因;根据多年水文频率分析,发生严重咸潮灾害时,西、北江枯季流量并非都是枯水流量,因此枯季上游来水量变化并不是近年来咸潮灾害加剧的主要原因。