基本气流在局域流型演化过程中的作用

用一个β平面准地转正压模式,实施了5组时间积分为72个模式日的试验,分析了不同基本气流对局域流型演化特征的作用。结果指出:强的基本气流相应于持续性干旱流型;弱的基本气流相应于间歇性的干旱流型。     

晶体及矿物颗粒大小对岩土材料力学性质的影响

岩石常见较大的晶体或者矿物颗粒,混凝土中是骨料,通过团簇模拟大颗粒的力学行为、团簇可以破裂。根据设计的相同数量、相同位置、不同半径的大颗粒数值单轴压缩试验,在虚拟试验条件下,考察了颗粒大小对材料力学响应的影响。通过分析颗粒材料的破裂形态、裂纹扩展过程、应力-应变曲线和破裂能量演化规律发现：大颗粒具有明显的增强特性,有阻止裂纹扩展的作用,破裂多绕大颗粒发展;增强幅度随颗粒半径的增加呈单增趋势,半径较小时,增强效果不明显。     

Investigation of a longfin inshore squid's swimming characteristics and an underwater locomotion during acceleration

In the present study, locomotion of a real longfin inshore squid (Doryteuthis pealeii) was numerically investigated. Geometry of a real squid was obtained using computed tomography (CT) images. In addition to a two-dimensional axisymmetric squid model, a modified squid model with no cavities around her head and an ellipse shaped model were generated with a fineness ratio (the ratio of body length to maximum body diameter) of 7.56. These numerical models were exposed to an acceleration with two different velocity programs. Added mass and basset forces on bodies were calculated during acceleration of the squid models starting from rest. Pressure and viscous drag forces were also calculated due to pressure variation along the squid models and friction on the surface of the models. The effect of a nozzle diameter on jet velocities and propulsive efficiency at all bodies were evaluated when time dependent velocity profiles (from 0 to 10 m/s in 0.5 and 1 s time durations) were set for the inlet of computational domain. The modified squid model required least thrust force during acceleration phase of time dependent velocity profile compared to the other models while the 0.02 m nozzle diameter provided largest propulsive efficiency for all models.     

黄河入海口径流量和输沙量对黄河三角洲生态环境的影响

20世纪后期黄河入海口的径流量减少和多次断流。这对流域下游地区的经济发展、尤其是农业产生明显影响。特别应注意的是,与径流量减少的同时,输沙量也明显减少,致使20世纪90年代以来入海口造陆面积锐减,在1996年和1997年甚至造陆停滞、出现海侵。黄河入海口的径流量、输沙量减少可能引发的一系列生态环境问题中,造陆面积的减少和海水的侵入可能关系到黄河三角洲的经济发展前途,近期则危及胜利油田的安全,应引起有关部门的关注。文中还探讨了用地球物理测井方法检测生态环境的变化。     

含沙浑水体的黏度测量及应用分析

含沙浑水体的高速冲击会对海底构筑物造成破坏,在计算浑水体对构筑物的作用力时,黏度是一项重要参数。本文利用落球试验和流变仪测试试验,测定了不同浓度含沙浑水体的黏度,给出其起始黏度与动力作用后的稳定黏度。结果表明:含沙量在大于400g/L时,浑水体为可用赫巴模型描述的非牛顿流体,并可简化为宾汉体;在含沙量小于400g/L时,浑水体仍可用宾汉体模型描述,在忽略较小的初始剪切应力时,可简化为牛顿流体。浓度大于400g/L的浑水体的起始黏度约为稳定黏度的100倍。文中讨论了含沙浑水体起始黏度与稳定黏度在工程计算应用中的适用情况。     

不同开口比人工鱼礁体水动力特性及礁体稳定性研究

为研究方型人工鱼礁体开口比的变化对其水动力特性的影响,利用Fluent软件模拟了边长为3m、开口比为0～0.6之间7种不同方型鱼礁体周围水流场,通过分析水流场变化规律得到了礁体流场效应、阻力系数随开口比的变化情况;基于Morison方程计算了礁体在波流作用下的受力及其抗滑移、抗倾覆安全系数。研究结果表明:当礁体开口比小于0.2时,背涡区范围较大,流场效应明显;随着开口比的增大,礁体产生的上升流范围及竖直向最大速度分量逐渐减小;对于方形开口礁体,阻力系数与开口比的关系式为Cd=0.875φ+1.088(R2=0.963,P<0.01);随着开口比的增大,礁体所受最大波流作用力、抗滑移及抗倾覆安全系数逐渐减小,但礁体不会发生滑移和倾覆,可为实际礁体结构的设计提供参考。     

Numerical flow and performance analysis of a water-jet axial flow pump

The purpose of the present study is to investigate the performance and three-dimensional flow fields in a water-jet pump. TASCflow is employed to simulate the rotator-stator coupling flow field. A standard k-ε turbulence model combined with standard wall functions is used. In order to investigate the effect of a rear stator on flow fields, the flows in two water-jet pumps with and without a rear stator are studied. Computational fluid dynamics (CFD)-predicted overall performances are in good agreement with the experimental results. Then the flow fields, such as the pressure distribution on the blade surfaces, and the axial and tangential velocity distribution, especially the radial loading distribution, are investigated at different flow rates. In addition, the effects of a rear stator and different spacings between the rotor and the stator on the overall performance and the flow fields of the water-jet pump are also investigated.     

Numerical modelling of deep sea air-lift

Deep sea air-lifting of solid particles from depth of 1600 m is simulated with a mathematical model of the three-phase flow in an upward pipe. The computations are carried out for an axisymmetric domain in a transient way. Phase distributions, pressure and velocity profiles together with flow rates for all phases are presented and analysed. The influence of the pipe diameter on the air-lift efficiency was studied for air-lift pipes of different lengths and found to be significant. The lifting efficiency increases with the increase of the pipe diameter due to the reduction of the wall friction influence on the flow. In addition, the efficiency also increases with the increase of the solid particles volume fraction at the inlet. The presented numerical model can be utilized during various stages of the design of the air-lift pumps to help answer fundamental questions on the process, and during their operation to select optimal process parameters and to address possible problems.     

Gradients in coral reef communities exposed to muddy river discharge in Pohnpei,Micronesia

This study analyzed how coral communities change along a gradient of increasing exposure to a mud-discharging river in the Enipein Catchment, Pohnpei, Micronesia. Using video transects, we quantified benthic communities at five sites along a gradient moving away from the river mouth towards the barrier reef. The most river-impacted site was characterized by a high accumulation of mud, low coral cover and low coral diversity. Although coral cover leveled off at ∼400 m from the river mouth to values found at the outer-most sites, coral diversity continued to increase with increasing distance, suggesting that the most distant site was still impacted by the river discharges. Fungiidae, Pavona, Acropora, Pachyseris and Porites rus all significantly increased in cover with distance from the river, while Turbinaria decreased. The combined presence and abundance of these six species groups, together with coral species richness, may help to indicate the effects of terrestrial runoff in similar runoff-exposed settings around Micronesia, whereas coral cover is not a sensitive indicator for river impact. Coral reefs are important resources for the people of Pohnpei. To prevent further degradation of this important resource, an integrated watershed approach is needed to control terrestrial activities.     

A predictive numerical model for potential mapping of the gas hydrate stability zone in the Gulf of Cadiz

This paper presents a computational model for mapping the regional 3D distribution in which seafloor gas hydrates would be stable, that is carried out in a Geographical Information System (GIS) environment. The construction of the model is comprised of three primary steps, namely: (1) the construction of surfaces for the various variables based on available 3D data (seafloor temperature, geothermal gradient and depth-pressure); (2) the calculation of the gas function equilibrium functions for the various hydrocarbon compositions reported from hydrate and sediment samples; and (3) the calculation of the thickness of the hydrate stability zone. The solution is based on a transcendental function, which is solved iteratively in a GIS environment.The model has been applied in the northernmost continental slope of the Gulf of Cadiz, an area where an abundant supply for hydrate formation, such as extensive hydrocarbon seeps, diapirs and fault structures, is combined with deep undercurrents and a complex seafloor morphology. In the Gulf of Cadiz, the model depicts the distribution of the base of the gas hydrate stability zone for both biogenic and thermogenic gas compositions, and explains the geometry and distribution of geological structures derived from gas venting in the Tasyo Field (Gulf of Cadiz) and the generation of BSR levels on the upper continental slope.