Numerical Investigation of Submarine Hydrodynamics and Flow Field in Steady Turn

This paper presents numerical simulations of viscous flow past a submarine model in steady turn by solving the Reynolds-Averaged Navier?Stokes Equations (RANSE) for incompressible, steady flows. The rotating coordinate system was adopted to deal with the rotation problem. The Coriolis force and centrifugal force due to the computation in a body-fixed rotating frame of reference were treated explicitly and added to momentum equations as source terms. Furthermore, velocities of entrances were coded to give the correct magnitude and direction needed. Two turbulence closure models (TCMs), the RNG model with wall functions and curvature correction and the Shear Stress Transport (SST) model without the use of wall functions, but with curvature correction and low-Re correction were introduced, respectively. Take DARPA SUBOFF model as the test case, a series of drift angle varying between 0° and 16° at a Reynolds number of 6.53×106 undergoing rotating arm test simulations were conducted. The computed forces and moment as a function of drift angle during the steady turn are mostly in close agreement with available experimental data. Though the difference between the pressure coefficients around the hull form was observed, they always show the same trend. It was demonstrated that using sufficiently fine grids and advanced turbulence models will lead to accurate prediction of the flow field as well as the forces and moments on the hull.     

基于UDF的水平轴潮流能水轮机被动旋转水动力性能研究

针对水平轴潮流能水轮机被动旋转问题,基于Fluent 17.0,运用UDF(User Defined Function)控制滑移网格对网格进行动态调整,仿真研究水轮机在不同安放角下被动旋转的水动力特性。通过仿真分析,结果表明:潮流能水轮机随着叶片安放角度的增加,尖速比、输出功率、捕能系数都是先增大后减小,叶片安放角为6°时,叶轮前后速度差最大,对潮流能利用充分,且各项性能均达到最佳;通过分析叶片受力,叶尖叶素在安放角为2°时阻力最大,3°时升力最大,升阻比在6°时最大,此时叶尖叶素升阻比C_L/C_D=6.27、攻角α=3.06°。由仿真结果可知水平轴潮流能叶轮的自启动过程由5个阶段组成,即加速度增大的加速运动段—加速度减小的加速运动段—加速度反向增大的减速运动段—加速度反向减小的减速运动段—稳定运行段,这对潮流能水轮机的设计具有重要的指导意义。     

三维旋转扫描测量平台设计与实现

本设计主要用于360°旋转的三维扫描,实现角度数据的实时获取。设计中采用单片机控制交流伺服电机进行自定的角度、速度与方向的旋转并实时上传时间、角度数据至上位机进行处理,实现了对平台旋转精度的控制与检测,着重研究了该传感器误差源的产生,对实际应用中的误差进行了定量分析,利用偏心改正、4分频等方法减少了误差,提高了参数精度。角度范围为360°,角度分辨率为0.01°。     

Convection in a rotating annulus having sidewalls of height-dependent thermal conductance

Abstract

Thermal convection in a vertically-mounted, rotating annulus of a particular design proposed by Davies and Walin (1977) is investigated. The annulus used in the present study differs from the conventional type in some important aspects: the sidewalls are finitely conducting, and the thermal conductance of the sidewalls is height-dependent. The theoretical model due to Davies and Walin is briefly recounted. The present study aims to verify the theoretical model; we have acquired numerical solutions to the governing Navier-Stokes equations. The numerical results are supportive of the theoretical contentions. The near-linear dependence of the isothermal slope on the parameter D, which is a function of Ω and ΔT, is corroborated within reasonable limits. New data on the vertical and radial structures of the meridional and azimuthal flows are presented. The numerical results also confirm that the shape of the sidewall thickness has a substantial influence on the meridional flow patterns. In the bulk of the interior flow field, the dominant azimuthal flow field and the temperature field are linked by the thermal wind relation.     

Two-and three-dimensional linear convection in a rotating annulus

Abstract

An exceptional case to the model-independent theory of Knobloch (1995) is presented, by investigating a rotating cylindrical annulus of height H and side wall radii r _o and r _i, with non-slip, perfectly thermally conducting side walls and thermally insulating stress-free ends. Radial heating permits the possibility of either two- or three-dimensional convective solutions being the preferred mode. An analytical solution is obtained for the two-dimensional case and a numerical solution for the three-dimensional solution, which is also applied to the two-dimensional solution. It is shown that both two- and three-dimensional solutions can be realized depending on the aspect ratio, γ = H/d, where d = r _o-r _i is the thickness of the annulus, the radii ratio λ = r _i/r _o and the rotation rate of the model. For γ = O(1) and λ = 0.4, the preferred convective solution is three-dimensional when the Taylor number, T < 10² and two-dimensional for T > 10². For small aspect ratios, γ ? 1, the preferred mode is two-dimensional for all rotation rates.     

旋转流体物理实验中见到的大气环流特征

在合适的实验参数下(热力Rossby数R_(OT)=0.1,Taylor数T_a=2.2 ×10~7),在旋转斜压流中,大尺度地形强迫造成低频振荡以及大气环流中的“阻塞”流型。这是由于地形强迫造成的准静止波与行进波的相互作用及共振引起的。地形把波数单一的流动变成多波数的流动。地形强迫使波数减少。     

高能射线工业CT最新进展

本文主要介绍了清华大学在高能射线工业CT研究及产业化方面的新进展,介绍了其中的多项成果:小体积、大功率的直线加速器,低噪声、高效率的阵列固体探测器,旋转极坐标反投影快速图像重建算法等.高能工业CT技术的研制成功及产业化,使我国高能工业CT技术达到国际先进水平,结束了我国无自主研制大型工业CT检测系统的历史,解决了我国大型工件无损检测难题,对提高我国高能无损检测技术水平具有重大意义.     

Thermal convection in a cylindrical annulus with a non-Newtonian outer surface

This study presents the results of numerical simulations of a model for lithospheremantle coupling in a terrestrial type planet. To first order, a geologically active terrestrial type planet may consist of a metallic core, silicate mantle and lithosphere, with the lithosphere being rheologically different from the mantle. Therefore we have developed a numerical model consisting of a thin non-Newtonian fluid hoop that is dynamically coupled to a thick Newtonian fluid cylindrical annulus. Thus the rheological dichotomy between mantle and lithosphere is built into the model. Time-dependent calculations show the existence of at least two regimes of behaviors. In one regime, the behavior of the hoop switches between periods characterized by low or high speeds, in response to changes in convective vigor and planform. This regime may apply to the planet Venus where the available evidence indicates that prior to 500 myr ago, the planet was resurfaced on a time scale of <100 myr. Since that time, large-scale tectonic activity on Venus has been sharply curtailed. In the other regime, which is more like plate tectonics on Earth, the hoop speeds rise and fall on short time scales.     

Optical depth effects on the formation of spectral lines in rotating and expanding spherical atmospheres

We have investigated the effects of increasing optical depths on spectral lines formed in a rotating and expanding spherical shell. We have assumed a shell whose outer radius is 3 times the inner radius, with the radial optical depths equal to 10, 50, 100, 500. We have employed a constant velocity with no velocity gradients in the shell. The shell is assumed to be rotating with velocities varying as 1/_ρ, where_ρ is the perpendicular distance from the axis of rotation, implying the conservation of angular momentum. Two expansion (radial) velocities are treated: (1)V = 0 (static case) and (2)V = 10 mean thermal units. The maximum rotational velocities areV _rot = 0, 5, 10 and 20. In the shell where there are no radial motions, we obtain symmetric lines with emission in the wings forV _rot = 0 and 5 while forV _rot ≥ 10 we obtain symmetric absorption lines. In the case of an expanding shell, we obtain lines with central emission.     

On a Physically Realistic Fast Dynamo

As a step towards a physically realistic model of a fast dynamo, we study numerically a kinematic dynamo driven by convection in a rapidly rotating cylindrical annulus. Convection maintains the quasi-geostrophic balance whilst developing more complicated time-dependence as the Rayleigh number is increased. We incorporate the effects of Ekman suction and investigate dynamo action resulting from a chaotic flow obtained in this manner. We examine the growth rate as a function of magnetic Prandtl number Pm, which is proportional to the magnetic Reynolds number. Even for the largest value of Pm considered, a clearly identifiable asymptotic behaviour is not established. Nevertheless the available evidence strongly suggests a fast dynamo process.