Hydrodynamic characteristics of rill flow on steep slopes

Rill erosion is a dominant sediment source on sloping lands. However, the amount of soil loss from rills on steep slopes is vastly more than that on gentle slopes because of differences in rill shape and hydraulic patterns. The aims of this paper are to determine the hydrodynamic characteristics of rills and the friction coefficients in steep slope conditions and to propose modifications of some hydraulic parameters used in soil loss prediction models. A series of inflow experiments was conducted on loess slopes. The results show that the geometric and hydraulic properties of rill on the steep loess slopes, which are characterized by the mean width of cross sections, mean velocity and mean depth of flow, are related to discharge and slope gradient in power functions. However, the related exponents to discharge are 0.26, 0.48 and 0.26, respectively, which are different from the exponents derived in previous studies, which were conducted on gentle slopes. The Manning roughness coefficient ranged from 0.035 to 0.071, with an average of 0.0536, and the Darcy–Weisbach friction coefficients varied from 0.4 to 1.9. The roughness coefficients are closely related to the Reynolds numbers and flow volumes; however, the correlations vary with slope gradient. The roughness coefficients are directly proportional to the Reynolds number and the flow volume on steep slopes, in contrast with the roughness coefficients found on gentle slopes, which decrease as the Reynolds number and flow volume increase. This difference is caused by the interactions among the hydraulics of the flow, the shape of the rills and the sediment concentrations on steep slopes. The results indicate that parameters used in models to predict rill erosion have to be modified according to slope gradient. Copyright © 2015 John Wiley & Sons, Ltd.     

Sediment load change with erosion processes under simulated rainfall events

Journal of Geographical Sciences - It is of great significance to quantify sediment load changing with erosion processes for improving the precision of soil loss prediction. Indoor rainfall...     

Rill development and soil erosion: a laboratory study of slope and rainfall intensity

A total of 15 rainfall simulation experiments were conducted in a 1 m by 2 m box varying slope (10, 20, 30%) and rainfall intensity (60, 90, 120 mm h^?1). The experiments were performed to study how rill networks initiate and evolve over time under controlled conditions with regard to the treatment variables considered, and to allow for input in a computer simulation model. Runoff and sediment yield samples were collected. Digital elevation models were calculated by means of photogrammetry for several time steps of most experiments. The soil used in the experiments was a basal till derived Cambisol typical for the Swiss Plateau. While significant differences were found for sediment yield, runoff did not vary significantly with treatment combinations. Increasing rainfall intensity had a larger effect on sediment yield than increasing slope. Rill density and energy expenditure decreased with time, suggesting that energy expenditure was a useful parameter to describe the emergence of rill network at the laboratory scale. Copyright © 2010 John Wiley & Sons, Ltd.     

Soil erosion by surface water flow on a stony,semiarid hillslope

Soil erosion on hillslopes occurs by processes of soil splash from raindrop impacts and sediment entrainment by surface water flows. This study investigates the process of soil erosion by surface water flow on a stony soil in a semiarid environment. A field experimental method was developed whereby erosion by concentrated flow could be measured in predefined flow areas without disturbing the soil surface. The method allowed for measurements in this study of flow erosion at a much wider range of slopes (2·6 to 30·1 per cent) and unit discharge rates (0·0007 to 0·007 m2 s−1) than have been previously feasible. Flow velocities were correlated to discharge and hydraulic radius, but not to slope. The lack of correlation between velocity and slope might have been due to the greater rock cover on the steeper slopes which caused the surface to be hydraulically rougher and thus counteract the expected effect of slope on flow velocity. The detachment data illustrated limitations in applying a linear hydraulic shear stress model over the entire range of the data collected. Flow detachment rates were better correlated to a power function of either shear stress (r2 = 0·51) or stream power (r2 = 0·59). Published in 1999 by John Wiley & Sons, Ltd.     

Factors affecting connectivity and sediment yields following wildfire and post-fire salvage logging in California's Sierra Nevada

Sediment delivery following post-fire logging is a concern relative to water quality. While studies have assessed the effect of post-fire logging on sediment yields at different spatial scales, none have explicitly identified sediment sources. Our goal was to quantify post-fire and post-salvage logging sediment yields and use rill patterns to identify sediment sources. We measured the extent and type of logging disturbance, length of rills per unit area or “rill density”, ground cover, and sediment yields in nine logged and five control small catchments or “swales”, 0.09 to 0.81 ha, for 5 years after the 2013 Rim Fire in California's Sierra Nevada. The logged swales had a mean ground disturbance of 31%. After the first wet season following logging, there was no difference in either mean rill density (0.071 and 0.088 m m⁻², respectively) or mean transformed, normalized sediment yields between the control and logged swales. Untransformed mean sediment yields across three sites ranged from 0.11–11.8 and 1.1–3.2 Mg ha⁻¹ for the controls and salvage-logged swales, respectively. Rill density was strongly related to sediment yield and increased significantly with the amount of high-traffic skid trail disturbance in logged swales. Rill density was not significantly related to the amount of bare soil despite a significant relationship between sediment yields and bare soil. Rills usually initiated in bare soil and frequently connected high traffic skid trails to the drainage network after being diverted by waterbars. Rill connectivity and sediment yields decreased in control and logged swales where vegetation or other surface cover was high, suggesting this cover disconnected rills from the drainage network. Increasing ground cover on skid trails and between areas disturbed by post-fire logging and stream channels may reduce sediment yields as well as the hydrologic connectivity between hillslopes and the drainage network.     

Testing assumptions and procedures to empirically predict bare plot soil loss in a Mediterranean environment

Empirical prediction of soil erosion has both scientific and practical importance. This investigation tested USLE and USLE‐based procedures to predict bare plot soil loss at the Sparacia area, in Sicily. Event soil loss per unit area, A_e, did not vary appreciably with plot length, λ, because the decrease in runoff with λ was offset by an increase in sediment concentration. Slope steepness, s, had a positive effective on A_e, and this result was associated with a runoff coefficient that did not vary appreciably with s and a sediment concentration generally increasing with s. Plot steepness did not have a statistically detectable effect on the calculations of the soil erodibility factor of both the USLE, K, and the USLE‐M, K_UM, models, but a soil‐independent relationship between K_UM and K was not found. The erosivity index of the USLE‐MM model performed better than the erosivity index of the Central and Southern Italy model. In conclusion, the importance of an approach allowing soil loss predictions that do not necessarily increase with λ was confirmed together with the usability of already established and largely applied relationships to predict steepness effects. Soil erodibility has to be determined with reference to the specific mathematical scheme and conversion between different schemes seems to need taking into account the soil characteristics. The USLE‐MM shows promise for further developments. The evolutionary concept applied in the development of the USLE should probably be rediscovered to improve development of soil erosion prediction tools. Copyright © 2014 John Wiley & Sons, Ltd.     

人工模拟降雨下细沟与细沟间流速的沿程分布

径流流速不仅是坡面径流的重要水动力学特性,而且是计算其他水力特性及侵蚀产沙的重要参数,本文目的在于研究坡面细沟流和细沟间薄层水流流速沿坡面的变化过程,比较细沟和细沟间径流流速的差别。实验选取1m、2．5m、4m、5．5m、7m、8．5m和10m共7个坡长的小区（均为5。）,装填粉壤土,采用历时2h、总雨量121mm的变...     

Estimating flow resistance in steep slope rills

Recent research recognized that the slope of 18% can be used to distinguish between the ‘gentle slope’ case and that of ‘steep slope’ for the detected differences in hydraulic variables (flow depth, velocity, Reynolds number, Froude number) and those representatives of sediment transport (flow transport capacity, actual sediment load). In this paper, using previous measurements carried out in mobile bed rills and flume experiments characterized by steep slopes (i.e., slope greater than or equal to 18%), a theoretical rill flow resistance equation to estimate the Darcy-Weisbach friction factor is tested. The main aim is to deduce a relationship between the velocity profile parameter Γ, the channel slope, the Reynolds number, the Froude number and the textural classes using a data base characterized by a wide range of hydraulic conditions, plot or flume slope (18%–84%) and textural classes (clay ranging from 3% to 71%). The obtained relationship is also tested using 47 experimental runs carried out in the present investigation with mobile bed rills incised in a 18%—sloping plot with a clay loam soil and literature data. The analysis demonstrated that: (1) the soil texture affects the estimate of the Γ parameter and the theoretical flow resistance law (Equation 25), (2) the proposed Equation (25) fits well the independent measurements of the testing data base, (3) the estimate of the Darcy-Weisbach friction factor is affected by the soil particle detachability and transportability and (4) the Darcy-Weisbach friction factor is linearly related to the rill slope.     

黄土坡面汇沙对细沟侵蚀的影响与贡献

细沟侵蚀是黄土高原坡面极其重要的侵蚀过程之一,汇沙对细沟侵蚀强弱具有重要影响,阐明汇沙对细沟侵蚀的影响与贡献,可以揭示坡面细沟侵蚀过程机理,并为治理坡面水土流失提供科学依据.采用定流量人工放水的组合小区模拟降雨的方法,对不同降雨强度与不同坡度下黄土坡面汇沙对细沟侵蚀的影响及贡献进行了研究,结果表明:细沟上方汇沙、细沟间汇沙、细沟径流剪切力对细沟侵蚀的影响,在不同降雨强度、不同坡度、不同降雨强度及坡度下皆可用三元对数方程描述;细沟上方汇沙、细沟间汇沙、细沟径流剪切力,以及细沟上方汇沙与细沟间汇沙及细沟径流剪切力三者的交互作用对细沟侵蚀的贡献率,在不同降雨强度下分别为13.18％、4.98％、61.2％及8.26％,在不同坡度下分别为4.73％、1.19％、73.65％及5.4％,在不同降雨强度及坡度下分别为10.84％、0.44％、65.22％及6.97％.     

Measurements of rill and gully erosion in Sicily

This article reports the results of a field investigation aimed to characterize the morphology of both rills monitored at Sparacia experimental area and two ephemeral gullies (EGs) located in the Tremamargi basin, Sicily, Italy. At first, the available literature data together with the measurements carried out in this investigation were used to show that the EG length is a key parameter for the estimation of the eroded volume. Then, the comparison among the pairs length and volume corresponding to measured rills, EGs and gullies showed that the exponent of the power relationship is independent of the channelized erosion type (rill, EG and gully), while a different scale factor has to be used for each erosion process. Finally, a single relationship applicable to all channelized erosion processes was deduced applying the dimensional analysis and the self‐similarity theory. Copyright © 2011 John Wiley & Sons, Ltd.