华北陆块北缘西段中元古代与裂谷作用有关的铁、稀土、多金属矿床特征及成因

华北陆块北缘西段狼山—白云鄂博裂谷系中元古代形成的大型多金属矿床 ,是我国重要的铁、稀土、铜、铅、锌矿产地。矿床为产于沉积岩中热水沉积型多金属矿床。其形成受地层、构造控制 ,与裂谷作用有着密切的关系。裂谷系内外分支的地质环境及矿床矿种不同 ,导致矿床特征及成因具有一定差异。白云鄂博铁、稀土矿床为钾、钠、磷等含量较高的热水沉积型 ,霍各乞铜、铅、锌多金属矿床为与中基性火山岩有关的过渡热水沉积型 ,东升庙和甲生盘等铅、锌多金属矿床为热水沉积型。文中将对上述矿床分别进行论述。     

Contrasting rifted margin styles south of Greenland: implications for mantle plume dynamics

We present new and reprocessed seismic reflection data from the area where the southeast and southwest Greenland margins intersected to form a triple junction south of Greenland in the early Tertiary. During breakup at 56 Ma, thick igneous crust was accreted along the entire 1300-km-long southeast Greenland margin from the Greenland Iceland Ridge to, and possibly 100 km beyond, the triple junction into the Labrador Sea. However, highly extended and thin crust 250 km to the west of the triple junction suggests that magmatically starved crustal formation occurred on the southwest Greenland margin at the same time. Thus, a transition from a volcanic to a non-volcanic margin over only 100–200 km is observed. Magmatism related to the impact of the Iceland plume below the North Atlantic around 61 Ma is known from central-west and southeast Greenland. The new seismic data also suggest the presence of a small volcanic plateau of similar age close to the triple junction. The extent of initial plume-related volcanism inferred from these observations is explained by a model of lateral flow of plume material that is guided by relief at the base of the lithosphere. Plume mantle is channelled to great distances provided that significant melting does not take place. Melting causes cooling and dehydration of the plume mantle. The associated viscosity increase acts against lateral flow and restricts plume material to its point of entry into an actively spreading rift. We further suggest that thick Archaean lithosphere blocked direct flow of plume material into the magma-starved southwest Greenland margin while the plume was free to flow into the central west and east Greenland margins. The model is consistent with a plume layer that is only moderately hotter, 100–200°C, than ambient mantle temperature, and has a thickness comparable to lithospheric thickness variations, 50–100 km. Lithospheric architecture, the timing of continental rifting and viscosity changes due to melting of the plume material are therefore critical parameters for understanding the distribution of magmatism.     

Subducted slabs beneath the eastern Indonesia-Tonga region: insights from tomography

Tomographic images of mantle structure beneath the region north and northeast of Australia show a number of anomalously fast regions. These are interpreted using a recent plate tectonic reconstruction in terms of current and former subduction systems. Several strong anomalies are related to current subduction. The inferred slab lengths and positions are consistent with Neogene subduction beneath the New Britain and Halmahera arcs, and at the Tonga and the New Hebrides trenches where there has been rapid rollback of subduction hinges since about 10 Ma. There are several deeper flat-lying anomalies which are not related to present subduction and we interpret them as former subduction zones overridden by Australia since 25 Ma. Beneath the Bird’s Head and Arafura Sea is an anomaly interpreted to be due to north-dipping subduction beneath the Philippines-Halmahera arc between 45 and 25 Ma. A very large anomaly extending from the Papuan peninsula to the New Hebrides, and from the Solomon Islands to the east Australian margin, is interpreted to be the remnant of south-dipping subduction beneath the Melanesian arc between 45 and 25 Ma. This interpretation implies that a flat-lying slab can survive for many tens of millions of years at the bottom of the upper mantle. In the lower mantle there is a huge anomaly beneath the Gulf of Carpentaria and east Papua New Guinea. This is located above the position where the tectonic model interprets a change in polarity of subduction from north-dipping to south-dipping between 45 and 25 Ma. We suggest this deep anomaly may be a slab subducted beneath eastern Australian during the Cretaceous, or subducted north of Australia during the Cenozoic before 45 Ma. The tomography also supports the tectonic interpretation which suggests little Neogene subduction beneath western New Guinea since no slab is imaged south of the New Guinea trench. However, one subduction zone in the tectonic model and many others, that associated with the Trobriand trough east of Papua New Guinea and the Miocene Maramuni arc, is not seen in the tomographic images and may require reconsideration of currently accepted tectonic interpretations.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

华北板内深部构造

华北板块的形成经历了早前寒武纪、燕山期及喜马拉雅期3个主要构造发展期，由于华北板块自身运动及所受应力场的作用，加之上地幔岩石圈的不均一性等因素，在中、新生代形成许多特殊的板内构造块。综合应用地质、地球物理和地球化学的成果，对华北板内深部结构进行了研究。从深部构造角度划分出6个金及金金属成矿带、4个金刚石成矿带，并对华北地区的地震及地热资源与新生事大陆裂谷的关系进行了探讨。     

Establishment of a Non-Permanent GPS Network to Monitor the Recent NE-SW Deformation in the Granada Basin (Betic Cordillera,Southern Spain)

The Granada Basin (Central Betic Cordillera), one of the most seismically active areas of the Iberian Peninsula, is currently subjected to NW-SE compression and NE-SW extension. The present day extension is accommodated by normal faults with various orientations but particularly with a NW-SE strike. At the surface, these active NW-SE normal faults are mainly concentrated on the NE part of the Basin. In this part we have selected a 15-km long segment where several active normal faults crop out. Using the marine Tortonian rocks as a reference, we have calculated a minimum extensional rate of 0.15-0.30 mm/year. The observed block rotation, the listric geometry of faults at depth and the distribution of seismicity over the whole Basin, indicate that this rate is a minimum value. In the framework of an interdisciplinary research project a non-permanent GPS-network has been established in the central sector of Betic Cordillera to monitor the crustal deformations. The first two observation campaigns were done in 1999 and 2000.     

Le Bassin lusitanien (Portugal) à l'Aptien supérieur–Albien : organisation séquentielle,proposition de corrélations, évolutionThe Lusitanian Basin (Portugal) during the late Aptian–Albian: sequential arrangement,proposal of correlations,evolution

. Three transgressive–regressive 2nd-order cycles were identified in the Upper Aptian–Albian fluvial and marine deposits of the Lusitanian Basin. Its widespread nature, probably including eustatic origin, allows correlation between the southern package, with precise stratigraphic positioning, and the northern series with a poorly constrained age. The main unconformities can be related to the onset of an oceanic crust, in the western margin of Galicia during the Late Aptian, in the bay of Biscay during the Early Albian, and, to the northwest of the Galicia triple point, during the Middle to Late Albian transition, and, at the Albian–Cenomanian boundary, to a probable compressive event with Africa due to the rotation of Iberia. To cite this article: J. Dinis et al., C. R. Geoscience 334 (2002) 757–764.     

Is there any detachment in the Lower Dolpo (western Nepal)?Y a-t-il un détachement dans le bas Dolpo (Népal occidental) ?

A structural transect in the Lower Dolpo highlights that the deformation and metamorphism of the Tibetan Zone (TZ) increase toward the bottom of the sequence. The contact with the underlying HHC is marked by a metamorphic jump from amphibolite facies in the carbonatic rocks of the upper part of the HHC to greenschist facies marbles in the TZ. Moreover, the HHC and the TZ show different metamorphic histories. The contact zone shows a strain increase accompanied by asymmetric folds with a top-to-the-northeast vergence, connected to a down-to-the-northeast tectonic transport. The contact is interpreted as an extensional shear zone, connected to the South Tibetan Detachment System. To cite this article: R. Carosi et al., C. R. Geoscience 334 (2002) 933–940.