海底玄武岩中次生组分HCl溶解实验研究

次生组分沉淀是海底岩石中普遍存在的现象,次生组分去除是减少次生组分干扰、获取海底岩石高质量数据的关键。选择西太平洋麦哲伦海山区MK海山相对新鲜的玄武岩作为研究对象,经研磨、均一化后将粉末样品分为49份,其中48份分别以0.25,0.50,1.00,1.50,2.00,2.50 mol/L六种浓度的足量HCl溶解0.5,1,2,4,8,16,32和64 h后,选取溶解残渣测定主要氧化物和特征微量元素质量分数,确定HCl溶解法在去除次生组分的同时不会对海底新鲜玄武岩中原生组分造成影响的HCl浓度-时间组合。结果表明,在HCl浓度为1.00～2.50 mol/L,溶解时间为0.5～2 h的12种HCl浓度-时间组合均可保证海底玄武岩中原生组分的安全,并可有效去除次生组分。综合海底蚀变玄武岩次生组分去除实验研究,推荐使用1.00～2.00 mol/L HCl,溶解时间在0.5～1 h的实验方案。     

低电阻率油气层物理参数变化机理研究

研究了淡水环境下富含粘土矿物、细颗粒砂岩低电阻率油气层. 分析了粘土的附加导电性,认为粘土质量百分数高且富含伊利石和蒙脱石的地层中,若地层水质量浓度小于15g/L等效NaCl盐溶液时,粘土的附加导电性是造成油气层电阻率低的首要原因. 同时分析了细颗粒、粘土质量百分数不高的储层,高的毛细管压力使束缚水饱和度很高,同样能形成低电阻率油气层. 储层中粘土质量百分数的多少对储层岩石电性特征(I-Sw曲线形态)有重要影响,可用于指导测井资料解释模型的选择.     

石榴石橄榄岩的熔融实验及其地质意义

在20×10~9Pa和25×10~9Pa条件下,对石榴石橄榄岩进行的14次高温高压熔融实验研究表明,在1600℃时石榴石橄榄岩开始熔融(初熔),熔体中的SiO_2>70％,Na_2O+K_2O>8％,类似于A型花岗岩成分。本实验为地幔花岗岩的成因提供了证据。     

氢化物发生-原子荧光光谱法则定锑精矿中的微量砷

使用氢化物发生—原子荧光光谱法测定锑精矿中的微量砷在国内外报道较少。文章在锑干扰状况试验、高锰酸钾溶液消除干扰的最佳条件选择试验、锑精矿中共存元素的干扰和消除试验的基础上,对样品进行了实测,并就其灵敏度、准确度和精密度进行了讨论。研究表明,该方法是测定锑精矿中微量砷的有效方法。     

便携式高频地波雷达台湾海峡浪高观测

As an important equipment for sea state remote sensing, high frequency surface wave radar(HFSWR) has received more and more attention. The conventional method for wave height inversion is based on the ratio of the integration of the second-order spectral continuum to that of the first-order region, where the strong external noise and the incorrect delineation of the first- and second-order Doppler spectral regions due to spectral aliasing are two major sources of errors in the wave height. To account for these factors, two more indices are introduced to the wave height estimation, i.e., the ratio of the maximum power of the second-order continuum to that of the Bragg spectral region(RSCB) and the ratio of the power of the second harmonic peak to that of the Bragg peak(RSHB). Both indices also have a strong correlation with the underlying wave height. On the basis of all these indices an empirical model is proposed to estimate the wave height. This method has been used in a three-months long experiment of the ocean state measuring and analyzing radar, type S(OSMAR-S), which is a portable HFSWR with compact cross-loop/monopole receive antennas developed by Wuhan University since 2006. During the experiment in the Taiwan Strait, the significant wave height varied from 0 to 5 m. The significant wave heights estimated by the OSMAR-S correlate well with the data provided by the Oceanweather Inc. for comparison, with a correlation coefficient of 0.74 and a root mean square error(RMSE) of 0.77 m. The proposed method has made an effective improvement to the wave height estimation and thus a further step toward operational use of the OSMAR-S in the wave height extraction.     

基于兰利法的泥石流临界雨量实验研究

分析了目前泥石流临界雨量确定常用方法存在的问题 ,以及泥石流临界雨量实验研究中实验降雨量确定的随意性和盲目性 ,提出以兰利 ( Langlie)法为指导进行实验 ,使实验降雨量的确定有了理论依据 ,减少了取得可靠实验结果所需实验次数 ,从而使泥石流临界雨量实验研究更趋完善和可行     

典型岩溶模型的高密度电法正反演研究及应用

高密度电法在岩溶勘察中发挥着重要的作用,可对岩溶发育带的位置、形态、规模、填充等情况进行有效探测。本文建立几种典型岩溶地电模型,计算其高密度电法响应并分析其特征,结合工程实例,认为将实测数据的拟断面图和定量的反演断面图相结合分析的方法,能提高对异常体的识别。     

锂辉石在花岗质熔体中溶解度及其成矿意义

本次研究利用快速淬火高温高压实验装置, 在100MPa和650~850℃条件下, 开展了锂辉石在简单花岗质熔体中溶解度及其影响因素的高温高压实验。实验结果表明温度是影响锂辉石在简单花岗质熔体中溶解度最为重要的因素, 其次为铝饱和指数(ASI), 而熔体的Na/K比值对锂辉石的溶解度几乎没有影响。结合已有的数据, 建立了锂辉石溶解度与温度、铝饱和指数的关系:其中T为绝对温度。该关系式可以用来量化锂辉石的结晶温度或评价花岗伟晶岩的成矿潜力。本次研究结果表明, 伟晶岩矿床中锂的成矿潜力受限于初始岩浆中锂的含量和伟晶岩的结晶温度。     

渤海结冰海区溢油行为数值模拟

基于溢与海冰,水,大气的相互作用原理,建立了渤海结冰海区溢油行为数据模式,该模式模拟子结冰海区中油的输运过程,与国外有关模式相比更加重视冰场和冰速场的作用。海冰及潮流模式及采被实况检验过的渤海海冰数值预报模式。     

Orbit injection error analysis for the Lageos III mission

An analysis is presented of the orbital injection errors for the Lageos III satellite mission. Several methods are introduced for the solution of the Inverse Problem in the Theory of Errors. The novelty of the present approach consists in the use of the full geopotential covariance matrix in the error propagation equations. The GEM-T1 covariance matrix is used. It is found that by properly accounting for the correlation among the even zonal harmonic coefficients the acceptable error bounds increase by an order of magnitude with respect to the case when only the variances are used. The most stringent constraint, even when using the full covariance, is on inclination, whose nominal value must be realized within approximately 0.1° for the recovery of the Lense-Thirring precession to be successful at the 3% level (accounting only for injection errors). The associated tolerance in the semimajor axis is about 30 km while that in eccentricity is approximately 0.2. However, if the errors in semimajor axis and eccentricity can be kept to the routinely achievable levels respectively of 10 km and 0.004, then the tolerance in inclination can be relaxed to 0.2°.