New national seismic zoning map of China

1 Background of the new national seismic zoning map The policy of seismic disaster mitigation in the Chinese mainland is prevention first. According to the law, the earthquake design for ordinary structures must fit the demand of national seismic zoning map. Seismic zoning map is the basis of the earthquake design (TANG, 1998; WU, et al, 1998). The seismic zoning map must be updated with the progress in methodology and accumula-tion of the data. There are three generations of national seis…     

3-D rheologic model of earthquake preparation (I)—Displacement field

Introduction The rock medium shows mainly elastic character under low-temperature, low-pressure and external force for short duration, yet it shows rheologic property under high-temperature, high-pressure and long-time external force. It is reasonable that the rapid earthquake generating process lasted for tens seconds is analyzed by the elastic theory. As for the earthquake generating process for hundreds or thousand years, nevertheless, the rheologic property of rock must be taken into accou…     

Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

Predictive instantaneous optimal control of inelastic structures during earthquakes

A new inelastic structural control algorithm is proposed by incorporating the force analogy method (FAM) with the predictive instantaneous optimal control (PIOC) algorithm. While PIOC is very effective in compensating for the time delay for elastic structures, the FAM is highly efficient in performing the inelastic analysis. Unlike conventional inelastic analysis methods of changing stiffness, the FAM analyzes structures by varying the structural displacement field, and therefore the state transition matrix needs to be computed only once. This greatly simplifies the computation and makes inelastic analysis readily applicable to the PIOC algorithm. The proposed algorithm compensates for the time delay that happens in practical control systems by predicting the inelastic structural response over a period that equals the magnitude of the time delay. A one‐story frame with both strain‐hardening and strain‐softening inelastic characteristics is analyzed using this algorithm. Results show that the proposed control algorithm is feasibile for any inelastic structures. While the control efficiency deteriorates with the increase in magnitude of the time delay, the PIOC maintains acceptable performance within a wide range of time delay magnitudes. Finally, a computer model of a six‐story moment‐resisting steel frame is analyzed to show that PIOC has good control results for real inelastic structures. Copyright © 2003 John Wiley & Sons, Ltd.     

时间谱电阻率法中的剩余电磁效应研究

根据频谱激电（SIP）法或复电阻率（CR）法中研究剩余电磁（REM）效应的思想，通过分析时间谱电阻率（TSR）法中场的基本特征，在TSR法中建立了与SIP（或CR）法中参数Φmax/Φ0max相类似的参数－Emax/E0，用来描述了TSR法中的REM效应。通过对一维可极化大地模型的REM效应的理论计算，验证了用Emax/E0表示的REM异常可用来形象地反映地电断面电阻率的高低。     

GPS精密定位中的海潮位移改正

根据海洋负荷潮理论，利用NAO99b全球海潮模型，计算了中国部分IGS站的海潮位移改正，并将海潮位移改正应用到GPS数据处理当中。在GAMIT软件的解算过程中，分别按加入和不加入海潮位移改正，对GPS基线分量和测站坐标分别进行了计算和比较分析。结果表明，海潮位移改正无论是对GPS基线分量还是对测站坐标，都有一定的影响。     

特定基准下的异常位移诊断

针对地壳运动和变形研究中存在的位移资料的参考基准、异常位移等问题，主要讨论了位移资料特定基准的转换和异常位移诊断的数学模型——特定基准转换模型为七参数相似变换模型，转换保持了变形体内部相对位置关系不变，并使转换后的位移矢量更能体现区域内的相对运动信息；异常位移诊断采用拟准检定法(QUAD)，在选定拟准观测的情况下，使得位移真误差具有明显的分群性；模拟算例结果显示，本文采用的线性变换模型、粗差拟准检定法都表现出很好的效果。     

岩体边坡工程中的位移监测及分析

边坡工程的监测取决于监测人员对岩(土)体介质的认识程度和选择相应的方法和手段。通过对江西德兴铜矿大山村选矿厂东部边坡和北部楔形地质结构体稳定状况的监测,阐述了在边坡工程中位移监测的应用及有关分析。     

黄壁庄水库副坝塌坑Ⅳ76+1槽段安全监测

介绍了黄壁庄水库副坝塌坑Ⅳ76+1槽段进行的安全监测设计及根据此设计进行的安全监测实施,根据取得的监测资料解决了一直未能确定的主要变形地层的问题,为水库的加固施工和后期的运行安全提供了一定的依据。     

高层建筑深基坑支护施工技术

深圳某高层建筑原基坑已作支护,但一直废弃作鱼塘用。新的基坑支护采用土钉墙和树根桩施工,支护完成后监测结果较好,没有发生明显的位移和沉降。