上扬子盆地西南缘上组合气藏成藏过程分析

通过对代表上扬子盆地西南缘上组合气藏特征的平落坝、白马庙和观音寺3个典型气藏进行解剖,明确了中侏罗统沙溪庙组天然气分布特征。结合输导体系、流体包裹体成藏期次和构造演化研究成果,分析了气藏成藏过程,总结其成藏模式,以期为有利勘探目标区的选择及评价提供地质依据。上扬子盆地西南缘沙溪庙组气藏以构造-岩性和岩性气藏为主,天然气主要分布在沙溪庙组Ⅰ、Ⅱ、Ⅲ段,主要聚集于构造高点。油气成藏时间集中在93～72 Ma,发生过至少2幕油气充注。燕山运动是气藏形成的主要时期,其形成的断层是沟通气源的主要通道;喜山运动是气藏天然气调整的主要时期,喜山期逆冲断层的活动及构造高点的迁移是天然气调整的主要原因。不同构造区域成藏具有差异性：西部褶皱带断-砂匹配、构造、砂体物性是主要控藏因素,构造高点、断层封闭性控制其含气丰度;东部斜坡带断-砂匹配、构造、封闭断层是主要控藏因素,构造高点、砂体物性控制其含气丰度。     

平湖油气田低渗透储层测井评价研究

平湖油气田P11储层开发是平湖油气田增储提产的重要目标,也是当前平湖油气田开发面临的难题之一。由于埋藏深,储层物性条件差,试油自然产能低下,储层流体性质复杂,气油比低,凝析油含量高,密度大,储层温度高,压力系数高,给测井解释和评价带来很大困难,对开发方案的实施提出了挑战。根据岩心分析资料,从成岩作用、沉积作用等方面对平湖组放鹤亭P11储层低渗原因进行了分析;对P11储层的测井响应特征进行了总结,对P11储层＂四性＂关系、孔隙度结构进行剖析,对储层孔隙度、渗透率、饱和度等参数进行了研究,得到一套适合P11储层测井解释评价的方法,为P11储层的开发提供参数依据和测井解释服务。     

下扬子区下古生界油气有利勘探区带探讨

下扬子区下古生界具有良好的油气地质条件,具备形成大型油气藏的物质基础,但一直未获得油气勘探的突破。本文通过地质、地球物理综合解释,结合部分地质露头、钻井资料及上扬子勘探成果,重点对下扬子区下古生界构造地质特征与油气地质条件等开展了综合分析研究。从构造沉积充填角度将下扬子区分为4个二级构造单元,中部地区的无锡-黄山断隆带构造相对稳定,分析认为其西北部的无锡-黄桥低褶带为油气勘探的有利区带,具有形成下古生界弱改造型油气藏的勘探前景。     

Diagenesis and origin of calcite cement in the Flemish Pass Basin sandstone reservoir (Upper Jurassic): Implications for porosity development

The Flemish Pass Basin is a deep-water basin located offshore on the continental passive margin of the Grand Banks, eastern Newfoundland, which is currently a hydrocarbon exploration target. The current study investigates the petrographic characteristics and origin of carbonate cements in the Ti-3 Member, a primary clastic reservoir interval of the Bodhrán Formation (Upper Jurassic) in the Flemish Pass Basin.The Ti-3 sandstones with average Q_86.0F_3.1R_10.9 contain various diagenetic minerals, including calcite, pyrite, quartz overgrowth, dolomite and siderite. Based on the volume of calcite cement, the investigated sandstones can be classified into (1) calcite-cemented intervals (>20% calcite), and (2) poorly calcite-cemented intervals (porous). Petrographic analysis shows that the dominant cement is intergranular poikilotopic (300–500 μm) calcite, which stared to form extensively at early diagenesis. The precipitation of calcite occured after feldspar leaching and was followed by corrosion of quartz grains. Intergranular calcite cement hosts all-liquid inclusions mainly in the crystal core, but rare primary two-phase (liquid and vapor) fluid inclusions in the rims ((with mean homogenization temperature (T_h) of 70.2 ± 4.9 °C and salinity estimates of 8.8 ± 1.2 eq. wt.% NaCl). The mean δ¹⁸O and δ¹³C isotopic compositions of the intergranular calcite are −8.3 ± 1.2‰, VPDB and −3.0 ± 1.3‰, VPDB, respectively; whereas, fracture-filling calcite has more depleted δ¹⁸O but similar δ¹³C values. The shale normalized rare earth element (REE_SN) patterns of calcite are generally parallel and exhibit slightly negative Ce anomalies and positive Eu anomalies. Fluid-inclusion gas ratios (CO₂/CH₄ and N₂/Ar) of calcite cement further confirms that diagenetic fluids originated from modified seawater. Combined evidence from petrographic, microthermometric and geochemical analyses suggest that (1) the intergranular calcite cement precipitated from diagenetic fluids of mixed marine and meteoric (riverine) waters in suboxic conditions; (2)the cement was sourced from the oxidation of organic matters and the dissolution of biogenic marine carbonates within sandstone beds or adjacent silty mudstones; and (3) the late phases of the intergranular and fracture-filling calcite cements were deposited from hot circulated basinal fluids.Calcite cementation acts as a main controlling factor on the reservoir quality in the Flemish Pass reservoir sandstones. Over 75% of initial porosity was lost due to the early calcite cementation. The development of secondary porosity (mostly enlarged, moldic pores) and throats by later calcite dissolution due to maturation of organic matters (e.g., hydrocarbon and coals), was the key process in improving the reservoir quality.     

Significance of vertical flux as a sink for surface water DMSP and as a source for the sediment surface in coastal zones of northern Europe

In April 1997 and 1998 the significance of sedimentation as a sink for epipelagic dimethylsulphoniopropionate (DMSP) production and as a source for marine sediments was reassessed using a newly designed sediment trap. The behaviour of the traps in immersion was monitored continuously and the collection efficiency was evaluated with ²³⁴Th measurements. Net DMS(P) fluxes were corrected for some physical and biological losses during the whole sedimentation process providing reliable estimates of gross DMSP fluxes. It is shown that daily losses by sedimentation account for between 0.1% and 16% of seawater particulate DMSP (DMSPp) standing stocks, and between 3% and 75% of daily DMSPp production. In the Malangen fjord we observed temporal increases of DMSP production and standing stocks which resulted also in increases of DMSP vertical fluxes and DMS(P) concentrations at the sediment surface. This result illustrates how tight the coupling can be between pelagos and benthos, and confirms that DMS(P) concentration in the sediment was a reliable diagnostic indicator of vertical export from overlying waters in Malangen fjord. In Ullsfjord, however, DMS(P) concentrations in the sediment were poorly indicators of Phaeocystis pouchetii export during the early stage of growth of a bloom. The high load of DMS(P) in Balsfjord's sediments could neither be attributed to local vertical sedimentation nor to short-term lateral advection of fresh DMSP-containing phytoplanktonic material, and provides indication that this tracer sometimes also can be misleading. The highest loads of DMS(P) in sediments and the fastest rates of sedimentation occurred in the Southern Bight of the North Sea.     

High resolution characterization of a core from the Lower Jurassic Gordondale Member,Western Canada Sedimentary Basin

The Gordondale Member is a hydrocarbon source rock and potential unconventional reservoir that extends across northeastern British Columbia and central-northwestern Alberta. It is an organic-rich, calcareous, fossiliferous mudstone with a median total organic carbon value of 6.0 wt%. A total of 230 samples were collected from approximately 25 m of Gordondale Member core for organic matter analysis using Rock-Eval 6 analysis and organic petrology. Detailed core logging provides sedimentological context for organic matter characterization. The predominant organic material in the samples is solid bitumen and liptinite with lesser zooclast and inertinite. Most kerogen is Type II, autochthonous marine biomass, with minimal dilution by inert organic carbon. Rock-Eval T_max values and random reflectance measurements of solid bitumen indicate the samples are within the oil generation window. Solid bitumen contributes a substantial amount of hydrocarbon potential to the interval. A micro-reservoir structure within the core is produced by thin intervals of impermeable displacive calcite that act as barriers to the upward migration of free hydrocarbons. These free hydrocarbon accumulations could make excellent targets for horizontal wells within the Gordondale Member.     

Simulation of paleotectonic stress fields and quantitative prediction of multi-period fractures in shale reservoirs: A case study of the Niutitang Formation in the Lower Cambrian in the Cen'gong block,South China

Reservoirs where tectonic fractures significantly impact fluid flow are widespread. Industrial-level shale gas production has been established from the Lower Cambrian Niutitang Formation in the Cen'gong block, South China; the practice of exploration and development of shale gas in the Cen'gong block shows that the abundance of gas in different layers and wells is closely related to the degree of development of fractures. In this study, the data obtained from outcrop, cores, and logs were used to determine the developmental characteristics of such tectonic fractures. By doing an analysis of structural evolution, acoustic emission, burial history, logging evaluation, seismic inversion, and rock mechanics tests, 3-D heterogeneous geomechanical models were established by using a finite element method (FEM) stress analysis approach to simulate paleotectonic stress fields during the Late Hercynian—Early Indo-Chinese and Middle-Late Yanshanian periods. The effects of faulting, folding, and variations of mechanical parameters on the development of fractures could then be identified. A fracture density calculation model was established to determine the quantitative development of fractures in different stages and layers. Favorable areas for shale gas exploration were determined by examining the relationship between fracture density and gas content of three wells. The simulation results indicate the magnitude of minimum principal stress during the Late Hercynian — Early Indo-Chinese period within the Cen'gong block is −100 ∼ −110 MPa with a direction of SE-NW (140°–320°), and the magnitude of the maximum principal stress during the Middle-Late Yanshanian period within the Cen'gong block is 150–170 MPa with a direction of NNW-SSE (345°–165°). During the Late Hercynian — Early Indo-Chinese period, the mechanical parameters and faults play an important role in the development of fractures, and fractures at the downthrown side of the fault are more developed than those at the uplifted side; folding plays an important role in the development of fractures in the Middle-Late Yanshanian period, and faulting is a secondary control. This 3-D heterogeneous geomechanical modelling method and fracture density calculation modelling are not only significant for prediction of shale fractures in complex structural areas, but also have a practical significance for the prediction of other reservoir fractures.     

New insights into the carbonate karstic fault system and reservoir formation in the Southern Tahe area of the Tarim Basin

As worldwide hydrocarbon exploration has extended from shallowly to deeply buried strata, reservoir quality has attracted substantial and persistent interest in petroleum geology. In particular, deeply buried strata (>5500 m) in the Tarim Basin have attracted considerable attention because carbonate reservoirs that have experienced fracture or dissolution have also been shown to demonstrate considerable hydrocarbon potential. Therefore, it is necessary to determine how these reservoirs are developed and distributed in detail from both scientific and practical standpoints.In this paper, we address this issue using a case study in the southern Tahe area, which is contained within the largest Palaeozoic marine oilfield in China. In the northern Tahe area, mega-paleokarst systems developed in the Ordovician strata; however, the reservoir quality in the southern part of the Tahe area is relatively poor because it is covered by insoluble formations during karstification. Observations of cores and analyses of images of well logging demonstrate that these reservoirs are dominated by caves, vugs and fractures that have developed near faults. We speculate that the faults penetrating insoluble formations represent the main dissolution passages that originally developed these karstic fault systems. Additionally, we analyse a series of outcrops, seismic data, and structures to characterize the spatial geometry of these major faults and their surrounding fractures in detail. Most of these are strike-slip faults, and their subsequent reservoirs can be divided into three categories based on their development, including dendritic, sandwich and slab reservoirs. Recent studies demonstrate that karstic fault reservoirs are most common traps in the study area. Although various types of carbonate karstic fault reservoirs are represented in this region, the dendritic karstic fault reservoir is the most hydrocarbon-rich.Guided by these initial results, 108 wells were drilled from 2013 to 2014, producing 485 thousand tons of oil and yielding success ratios greater than 89%. The average production of dendritic reservoirs is 37.4 tons per day (t/d), while those of sandwich and slab types are 20.2 t/d and 14.0 t/d, respectively. These results represent significant references for future hydrocarbon exploration and the development of similar deeply buried karstic fault reservoirs in the Tarim Basin and elsewhere.     

埃及Bakr—Amer油田古近系Eoc组储层特征

储层特征研究是评价碳酸盐岩储层物性、寻找油气富集区和落实剩余油分布的基础,通过对区域构造、地层和沉积特征的研究,利用统计和数学方法对Bakr-Amer油田Eoc储层物性、储集空间类型和控制因素进行了分析,认为受构造运动影响,储层在深部残余厚度大,但物性相对也较差,以压实、胶结和溶蚀作用为主。高部位残余厚度小,但受风化、淋滤和构造运动的影响,裂缝发育,储层物性好,以压实和溶蚀作用为主。     

Invasive Spartina alterniflora-induced factors affecting epibenthos distribution in coastal salt marsh, China

Artificially introduced cordgrass, Spartina alterniflora, rapidly colonized the intertidal flats of the Jiangsu coast, eastern China. The epibenthos on an intertidal flat invaded by S. alterniflora were studied, to identify how local epibenthos species react to an altered environment. Epibenthic samples and surficial sediment samples were collected along a shore-normal profile in 50 quadrats at ten stations across the Spartina salt marsh; and five control quadrats for a station located on the barren sandy-mud flat. The grain size parameters of the surficial sediments show that S. alterniflora altered the grain size gradient along the profile of the intertidal zone by trapping fine-grained sediments. Spartina alterniflora could inhabit lower elevations than indigenous salt marsh vegetation, thus creating larger areas of finer surficial sediments, which was suitable for not only native epibenthic species but also species which do not exist on the barren sandy-mud flat. Correlation analyses show that the epibenthos were sensitive to sediment grain size and type, on the invaded S. alterniflora salt marsh. Further, there was an interspecific relationship affecting the distribution of epibenthos. The results show that epibenthos preferred ecological niches, within the Spartina salt marsh, even in the same sampling station.