植物加固路堤边坡浅层土体分析及工程应用

在总结植物加固黄土路堤边坡浅层土体的机理之后,结合宝中铁路实际工程,对紫穗槐和柠条两种植物的加固效果进行了详细的分析。     

云南省祥(云)-临(沧)公路红土坡隧道变形原因及加固方案

云南省祥(云)-临(沧)公路红土坡隧道，在施工过程中变形严重，洞内数次冒顶、产生地面陷落，并诱发滑坡，严重影响了施工进度并造成较大经济损失。文章根据现场勘查及变形监控量测资料，详细论述了隧道变形特点，从地层岩性、构造、地应力条件、地下水作用、施工工艺、滑坡影响等方面综合分析了隧道变形原因。红土坡隧道变形是软弱的地层岩性、地应力条件改变、地下水作用、施工工艺以及滑坡偏压等各种因素共同作用的结果。且隧道变形诱发滑坡，滑坡又促使隧道进一步变形。基于此，文章提出了首先对滑坡进行支挡，再对隧道围岩进行加固的整治思路，并提出具体工程方案。整治工程实施后，红土坡隧道变形已得到完全控制，取得良好的治理效果。     

A multiphase approach for evaluating the horizontal and rocking impedances of pile group foundations

This paper advocates the use of a multiphase model, already developed for static or quasi‐static geotechnical engineering problems, for simulating the behaviour of piled raft foundations subject to horizontal as well as rocking dynamic solicitations. It is shown that such a model, implemented in a FEM code, yields appropriate predictions for the foundation impedance characteristics, provided that shear and bending effects in the piles are taken into account, thus corroborating the findings of the asymptotic homogenization theory. Besides, it is notably pointed out that such a multiphase‐based computational tool makes it possible to assess the dynamic behaviour of pile groups in a much quicker way than when using direct numerical simulations, which may face oversized problems when large pile groups are concerned. Copyright © 2016 John Wiley & Sons, Ltd.     

Analytical prediction of aggregates' effects on the ITZ volume fraction and Young's modulus of concrete

In order to evaluate analytically the ITZ volume fraction (f_ITZ) in concrete, a three phase model is proposed for the random concrete microstructure using the Voronoï tessellation. Within this model, the ITZ local thickness is a statistical variable depending on the local paste thickness available between each couple of neighbouring aggregates. The f_ITZ is found to not exceed 7% for typical concretes. Then, the concrete Young's modulus is predicted analytically using a four‐phase generalized self consistent model but in which the proposed f_ITZ is considered. It is found that the concrete Young's modulus increases when increasing aggregates volume fraction, aggregates maximum size and the proportion of coarse aggregates and when decreasing the ITZ thickness and Young's modulus. Finally, the validity of the proposed model is discussed based on a comparison between its predictions and three sets of experimental results related to normal and high strength concretes taken from literature. Copyright © 2016 John Wiley & Sons, Ltd.     

Material selection for the gas containment system of a compressed natural gas carrier fleet

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.     

Numerical simulation of the response of a reinforced wall to a high speed train passage

The dynamic response of a mechanically stabilized earth wall to the passing of a high‐speed train is modelled using the finite element method. A three‐dimensional analysis is carried out, using a specific framework that allows performing the analysis with a moderate computational effort. In the first place, a so‐called multiphase approach is used to take into account the reinforcing strips. The moving load is taken into account by performing the calculation in a mobile referential using the properties of symmetry of the train cars and a simplifying assumption of periodicity for the whole train. We also assume a steady state. A partial validation of the approach is obtained by means of a comparison with an analytical solution. The quick increase in displacements induced by the train passing when the speed comes close to the celerity of Rayleigh waves clearly appears in the results. The vertical displacements, vertical stresses in the backfill, tensile forces in the strips and the influence of the stiffness of the soil are discussed. Copyright © 2017 John Wiley & Sons, Ltd.     

An original semi‐discrete approach to assess gas conductivity of concrete structures

For civil engineering structures with a tightness role, structural permeability is a key issue. In this context, this paper presents a new proposition of a numerical modelling of leakage rate through a cracked concrete structure undergoing mode I cracking. The mechanical state of the material, considered in the framework of continuum mechanics based on finite element modelling, is described by means of the stress‐based nonlocal damage model which takes into account the stress state and provides realistic local mechanical fields. A semi‐discrete method based on the strong discontinuity approach to estimate crack opening is then considered in the post‐treatment phase. Using a Poiseuille's like relation, the coupling between the mechanical state of the material and its dry gas conductivity is performed. For validation purposes, an original experimental campaign is conducted on a dry concrete disc loaded in a splitting setup. During the loading, gas conductivity and digital image correlation analysis are performed. The comparison with the 3D experimental mechanical global response highlights the performance of the mechanical model. The comparison between crack openings measured by digital image correlation and estimated by the strong discontinuity method shows a good agreement. Finally, the results of the semi‐discrete approach coupled with the gas conductivity compared with experimental data show a good estimation of the structural conductivity. Consequently, if the mechanical problem is well modelled at the global scale, then the proposed approach provides good estimation of gas conductivity. Copyright © 2016 John Wiley & Sons, Ltd.     

Modelling the flow of self‐compacting concrete

A Lagrangian particle‐based method, smooth particle hydrodynamics (SPH), is used in this paper to model the flow of self‐compacting concretes (SCC) with or without short steel fibres. An incompressible SPH method is presented to simulate the flow of such non‐Newtonian fluids whose behaviour is described by a Bingham‐type model, in which the kink in the shear stress vs shear strain rate diagram is first appropriately smoothed out. The viscosity of the SCC is predicted from the measured viscosity of the paste using micromechanical models in which the second phase aggregates are treated as rigid spheres and the short steel fibres as slender rigid bodies. The basic equations solved in the SPH are the incompressible mass conservation and Navier–Stokes equations. The solution procedure uses prediction–correction fractional steps with the temporal velocity field integrated forward in time without enforcing incompressibility in the prediction step. The resulting temporal velocity field is then implicitly projected on to a divergence‐free space to satisfy incompressibility through a pressure Poisson equation derived from an approximate pressure projection. The results of the numerical simulation are benchmarked against actual slump tests carried out in the laboratory. The numerical results are in excellent agreement with test results, thus demonstrating the capability of SPH and a proper rheological model to predict SCC flow and mould‐filling behaviour. Copyright © 2010 John Wiley & Sons, Ltd.     

Review and enhancement of 3D concrete models for large‐scale numerical simulations of concrete structures

The present paper focuses on selected plasticity and damage‐plasticity models for describing the 3D material behavior of concrete. In particular, a plasticity model and a damage‐plasticity model are reviewed and evaluated. Based on the results of the evaluation, enhancements are proposed, aiming at improving the correspondence between predicted and observed material behavior and aiming at implementing a robust and efficient stress update algorithm in a finite element program for performing large‐scale 3D numerical simulations of concrete structures. The capabilities of the concrete models are demonstrated by 3D numerical simulations of benchmark tests with combined bending and torsional loading and combined compression and shear loading and by a large‐scale 3D finite element analysis of a model test of a concrete arch dam. Copyright © 2011 John Wiley & Sons, Ltd.     

混凝土灌注桩桩头渗水的处理及预防措施

混凝土灌注桩桩头渗水对桩体混凝土受力和基底防水产生影响,对混凝土结构中的钢筋造成腐蚀。结合工程实例,对桩头渗水产生的原因进行分析,主要有操作经验不足、责任心不强,灌注器具不合格,混凝土质量指标不符合要求,灌注接近结束时拔管速度过快、灌注终了超灌高度测量不准,基土含水量高、水压大等;出现桩头渗水可采用人工剔除或注浆封堵处理;介绍了预防措施,包括加强作业人员培训,强化灌注器具检查,严控混凝土质量,重点监管终灌时的状态,做好基坑内降水工作等。