Cohesive‐frictional model for bond and splitting action of prestressing wire

This paper presents a numerical procedure for bond between indented wires and concrete, and the coupled splitting process of the surrounding concrete. The bond model is an interface, non‐associative, plasticity model. It is coupled with a cohesive fracture model for concrete to take into account the splitting of such concrete. Bond between steel and concrete is fundamental for the transmission of stresses between both materials in precast prestressed concrete. Indented wires are used to improve the bond in these structural elements. The radial component of the prestressing force, increased by Poisson's effect, may split the surrounding concrete, decreasing the wire confinement and diminishing the bonding. The combined action of the bond and the splitting is studied with the proposed model. The results of the numerical model are compared with the results of a series of tests, such as those which showed splitting induced by the bond between wire and concrete. Tests with different steel indentation depths were performed. The numerical procedure accurately reproduces the experimental records and improves knowledge of this complex process. Copyright © 2010 John Wiley & Sons, Ltd.     

皖南山区钢管砼拱桥施工技术

铜管砼拱桥在皖南山区受到应用限制的主要因素是钢管加工困难,构件运输的自然环境条件差,大型预制构件不易到达桥位处,加之某些区域的环境因素影响,使钢管砼拱桥施工,养护和维修成为主要问题.文章主要叙述了钢管砼拱桥的几种施工方法,对各种施工方法的适用条件及技术要点进行了分析,供同行参考.     

考虑桩体刺入变形的透水混凝土桩复合地基固结理论研究

现有的多元复合地基利用两种或者两种以上的桩型对地基土进行加固,以期提高地基承载力、加速地基固结。提出了一种兼具散体材料桩和刚性不排水桩自身优点的透水混凝土桩复合地基固结模型。工程中刚性桩与土体的压缩量并不相等,这与等应变条件存在着不一致的地方。为此,抛弃传统等应变假设,考虑桩体向垫层和下卧层的刺入变形,对传统等应变假定进行修正,同时考虑了扰动区土体水平渗透系数的抛物线变化和水在桩体内的径向、竖向渗流,给出了此类固结问题的控制方程和解答以及复合地基固结度的表达式,并对复合地基固结度的解进行了讨论。最后与其他复合地基解做了比较并对固结性状进行了分析,并针对透水混凝土桩孔隙引起的桩阻作用对地基固结速度的影响进行了验证。     

水泥聚苯模壳格构式混凝土墙体抗震性能的芯孔尺寸影响试验研究

为研究芯孔尺寸对传统型水泥聚苯模壳(EPSC)格构式混凝土墙体抗震性能的影响,对2个传统型EPSC格构式混凝土墙体原型试件进行低周往复荷载试验,2个试件芯孔直径分别为160 mm和120 mm;对比分析了2个试件的破坏特征和承载力、滞回曲线、骨架曲线、刚度退化等抗震性能。结果表明:芯孔直径大的复合墙体具有更优良的抗震性能;芯孔直径增加,复合墙体的承载力、抗侧刚度和耗能能力均有不同程度的提高。     

基于耐震时程法的钢筋混凝土框架弹塑性地震响应及损伤发展

耐震时程法（ETA）仅需少量的非线性时程分析,便可以掌握结构倒塌破坏的全过程。但是,此方法目前较少应用于结构倒塌失效分析。本文探讨了耐震时程曲线的特性及拟合思路,以钢筋混凝土框架为研究对象,应用ETA方法分析了钢筋混凝土框架的地震响应及损伤发展。研究结果:（1）混凝土框架结构的地震响应分析结果表明:采用ETA方法分析时结构顶点位移和层间位移角与采用IDA方法分析时接近,而最大基底剪力会略大;但是,两种方法的结果相关系数均接近于1。（2）强震下的结构倒塌分析结果表明:ETA方法能较为准确的预测结构的塑性铰分布、塑性铰出现概率及塑性铰发展顺序。当采用多条耐震时程加速度曲线作为输入时,评估结果准确性更高。由于ETA方法仅需进行少量几条耐震时程分析且计算高效,因此ETA方法可以成为预测结构失效模式的高效方法。     

Offshore Aggregates Resources on the Northern Continental Shelf of the East China Sea

A large‐scale survey for offshore aggregates is carried out on the northern shelf of the East China Sea. Results show that most of them are directly exposed in the Yangtze Shoal and the linear sand ridges system at water depths 25–55 m and 60–120 m, respectively. The components of these deposits belong to fine aggregates in terms of the fineness modulus. The potential resources are as high as 147.8 × 10¹² kg for the Yangtze Shoal yet only 36.68 × 10¹² kg for the sand ridges area, respectively. A preliminary feasibility analysis suggests that the Yangtze Shoal is suitable for dredging under the present conditions of technology and economy.     

水泥混凝土路面施工质量管理

加强混凝土路面施工全面质量管理,一定要严格按国家有关规范和评定标准施工和验收。加强水泥混凝土路面施工管理和质量控制,对加快道路建设步伐,提高工程质量,节省投资,更好地服务于社会经济发展具有十分重要的意义。     

中国东部陆下岩石圈地幔中的再循环地壳流体组分

地幔捕虏体中的流体组分记录了地幔演化的信息,可用来认识地幔中再循环地壳组分的性质和来源。采用分步加热质谱法测定中国东部二辉橄榄岩捕虏体组成矿物中流体挥发份的碳、氢和氧同位素组成,结合化学组成(Zhang et al., 2004)综合分析表明,早期流体包裹体、矿物晶格缺陷和空隙中的流体挥发分主要在高温段(800-1200°C)释出,CO2和CO显示较轻的δ13C值,与世界其它地区地幔捕虏体明显不同;晚期流体包裹体中的流体挥发分主要在低温段(300-600°C)释出。根据中国东部地幔演化事件、地幔矿物性质认为陆下岩石圈地幔中三种类型的流体挥发份中均存在来源不同的再循环地壳组分：（1）地幔初始流体：主要为耐熔矿物橄榄石在800-1200°C释出的流体组分,华北克拉通地幔初始流体的化学组成（主要为CO）与华南克拉通（主要为CO2）明显不同,反映二者拼合前各自演化时期捕获的流体组分。地幔特征的δD、δ13CCH4和δ18OCO2反映初始流体组分可能为元古代克拉通大陆型岩石圈地幔成分,较轻的CO2 和 CO的δ13C值揭示初始流体中存在部分再循环地壳流体,可能在1.9Ga的大陆碰撞过程中混入。（2）地幔交代流体：指斜方辉石和单斜辉石800-1200°C释气峰的流体组分,以H2为主。华北克拉通交代流体主要组分H2含量(80.73 mm3.STP/g) 明显低于华南克拉通(138.91 mm3.STP/g),地幔特征的δDH2和δ13CCH4表明交代流体主体为地幔来源,较轻的δ13CCO2,CO和较重δ18OCO2揭示其中存在再循环陆壳流体,其可能的来源为华北与华南中生代拼合过程中的壳幔相互作用。（3）岩石圈减薄流体：指二辉橄榄岩捕虏体组成矿物在400-600°C释放出的流体,华北与华南克拉通在流体组成方面相似,壳源特征的CO2、CO和CH4的δ13C值,以及较轻的δ18OCO2和δDH2O值指示该流体可能为岩石圈地幔减薄过程中引起的再循环洋壳流体,可能与中国东部转换带中水平俯冲的太平洋岩石圈(或其前身)脱气有关。     

Estimating economic losses of midrise reinforced concrete shear wall buildings in sedimentary basins by combining empirical and simulated seismic hazard characterizations

Studies of recorded ground motions and simulations have shown that deep sedimentary basins can greatly increase the intensity of earthquake ground motions within a period range of approximately 1–4 s, but the economic impacts of basin effects are uncertain. This paper estimates key economic indicators of seismic performance, expressed in terms of earthquake‐induced repair costs, using empirical and simulated seismic hazard characterizations that account for the effects of basins. The methodology used is general, but the estimates are made for a series of eight‐ to 24‐story residential reinforced concrete shear wall archetype buildings in Seattle, WA, whose design neglects basin effects. All buildings are designed to comply with code‐minimum requirements (i.e., reference archetypes), as well as a series of design enhancements, which include (a) increasing design forces, (b) decreasing drift limits, and (c) a combination of these strategies. As an additional reference point, a performance‐based design is also assessed. The performance of the archetype buildings is evaluated for the seismic hazard level in Seattle according to the 2018 National Seismic Hazard Model (2018 NSHM), which explicitly considers basin effects. Inclusion of basin effects results in an average threefold increase in annualized losses for all archetypes. Incorporating physics‐based ground motion simulations to represent the large‐magnitude Cascadia subduction interface earthquake contribution to the hazard results in a further increase of 22% relative to the 2018 NSHM. The most effective of the design strategies considered combines a 25% increase in strength with a reduction in drift limits to 1.5%.     

往复荷载作用下锈蚀钢筋混凝土柱黏结滑移模型及数值模拟研究

为实现地震作用下锈蚀钢筋混凝土柱精细化数值模拟分析,基于已有研究成果建立往复荷载作用下锈蚀钢筋与混凝土间的黏结滑移本构模型:结合课题组前期试验结果,采用ABAQUS有限元分析软件对建立的黏结滑移本构模型进行有效性验证,通过对数值计算结果与试验结果之间误差分析,进一步对黏结滑移模型中的摩擦黏结应力系数和退化系数进行修正,最终建立更为合理的锈蚀钢筋与混凝土间黏结滑移本构模型。通过数值计算结果与试验结果的再次比较,验证修正后黏结滑移本构模型的有效性。结果表明:修正后的锈蚀钢筋与混凝土间黏结滑移模型可更好地反映往复荷载作用下锈蚀钢筋混凝土柱的滞回性能。该成果可为地震作用下锈蚀钢筋混凝土结构的数值分析计算提供理论参考。