中国遥感卫星辐射校正场气溶胶光学特性观测研究

1999年6月28日~7月19日在敦煌场, 7月25日~7月31日在青海湖水面场进行了一次大规模综合野外测量试验, 其中采用3台先进的法国CIMEL太阳辐射计对两个场地大气光学特性进行了系统全面测量, 获得大量晴空天气条件下的大气光学数据。利用Langley法处理气溶胶通道数据得到气溶胶光学厚度及其光谱变化。测量结果显示550 nm波长平均气溶胶光学厚度分别为0.12、0.18, 由气溶胶光学厚度的波长变化得到气溶胶Junge参数分别为2.6、3.0, 并与几种典型气溶胶类型比较。结果表明两地在晴空天气里, 气溶胶含量较小, 符合遥感卫星传感器辐射定标的大气条件。     

反扩散格式在二维锋生数值模拟中的应用

把无粘流中能成功捕捉接触间断的反扩散差分格式,用在了准地转二维理想锋生的数值模拟中,并将计算结果与Cullen的计算结果和半地转方程的精确解进行了比较。用反扩散格式模拟的锋面较Cullen的结果更加显,而且更接近半地转方程的精确解。     

半干旱草地地表土壤热通量的计算及其对能量平衡的影响

利用2008年7月兰州大学半干旱气候与环境观测(SACOL)站的观测资料,对比分析了地表土壤热通量的三种计算方法,即谐波法、温度预报校正法(TDEC法)以及结合自校正热通量板(HFP01SC)测量的温度积分法(ITHP法);进而分析了三种不同方法的计算结果对地表能量平衡的影响。比较5cm深度处谐波法和TDEC法的计算结果与HFP01SC的实测结果,三者的相位基本一致,相互之间均具有很好的线性关系;谐波法与TDEC法的计算值较为接近,但分别比HFP01SC的实测值偏大了2%和6%(主要发生在夜间)。对于地表的土壤热通量(G0),谐波法与TDEC法两者的计算结果仅偏差约1%;TDEC法与ITHP法的计算结果之间也具有很好的线性关系(R2=0.99),但偏差达到9%左右。相对于HFP01SC的实测结果,由谐波法和TDEC法计算的G0可将SACOL站的地表能量闭合率分别提高6%和7%左右;利用温度积分法将HFP01SC的实测结果校正到地表后,地表能量闭合率也提高了约6%。因此,在对涡动相关通量做了常规订正的情况下,当充分考虑了土壤热存储后,SACOL站的地表能量闭合率可提高6%～7%,达到82%～83%左右。     

Comparative study on two methods for calculating the gravitational potential of a prism

The determination of the gravitational potential of a prism plays an important role in physical geodesy and geophysics. However, there are few literatures that provide accurate approaches for determining the gravitational potential of a prism. Discrete element method can be used to determine the gravitational potential of a prism, and can approximate the true gravitational potential values with sufficient accuracy (the smaller each element is, the more accurate the result is). Although Nagy’s approach provided a closed expression, one does not know whether it is valid, due to the fact that this approach has not been confirmed in literatures. In this paper, a study on the comparison of Nagy’s approach with discrete element method is presented. The results show that Nagy’s formulas for determining the gravitational potential of a prism are valid in the domain both inside and outside the prism.     

基于半监督核模糊c-均值算法的北京一号小卫星多光谱图像分类

针对遥感图像数据大多不服从高斯分布以及遥感图像分类存在非线性、模糊性和标记数据少等问题,提出基于半监督核模糊c-均值算法的多光谱遥感图像分类方法.首先,把半监督学习理论和核理论同时引入模糊c-均值算法,形成半监督核模糊c-均值算法.然后,用该算法与k-均值算法、最大似然算法、多类支持向量、半监督核支持向量、模糊c-均值...     

几种建立DEM模型插值方法精度的交叉验证

建立DEM模型时需要对离散的高程点进行空间插值,实现这一目的的插值方法有很多种。文章主要选择了6种常用的插值方法,分别在平原、丘陵和高山几种不同复杂程度的环境下对其插值的精度使用交叉验证方法进行评估。结果表明,同样的插值方法对不同复杂程度的地形效果是不一致的,多种插值方法中以克里金插值方法的插值适用性最强,精度最高。     

模糊综合评判方法在灌溉用水水质评价中的应用

松源市地处干旱半干旱地区,农业灌溉是粮食增产非常重要的措施。在灌溉中水质是保证粮食和土地质量的非常关键的问题。在分析灌溉用水水质评价方法的基础上,采用模糊综合评判的方法,选择酸度、碱度和矿化度为评价因子的计算方法,同时简述了模糊综合评价方法的原理及四种评价模型。用实例说明了评价步骤,最后对松源市地下水灌溉水质进行评价,其结果合理、可信。     

A spectrophotometric measurement of soil cation exchange capacity based on cobaltihexamine chloride absorbance

Among numerous methods for cation exchange capacity (CEC) determination for soils and sediments, the cobaltihexamine chloride method is frequently used due to its ability to measure CEC at soil pH. After exchange with Co(NH₃)₆³⁺ ions, CEC is estimated via the measurement of the Co remaining in solution. The modified method proposed allows a more rapid determination of CEC based on the measurement of the absorbance at 472 nm of the cobaltihexamine chloride solution before and after exchange. This method has been applied to various soil's horizons from four sites, selected to cover a wide range of CEC and pH values. The model obtained allows one to calculate CEC from absorbance at 472 nm with 95% confidence intervals. As CEC is of relevant meaning in agronomical and environmental purposes, and more recently in ecotoxicological studies, this modified method can be proposed as a rapid test for CEC evaluation.     

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.     

研究花岗岩类成因类型和幔壳成分比的同位素方法探讨

Sm-Nd法及其参数εNd（O）、εNd（T）、TCHUR^Nd、εDM^Nd及x,是测定花岗岩形成年龄及研究花岗岩成因类型、模式年龄及地幔物质百分比的重要手段,但因其测试费用高等原因,难以广泛使用。作者提出了Rb-Sm法的相应参数εSr（O）、εSr（T）、TUR^Sr、εDM^Sr及μ做为补充,在没有Sm-Nd同位素资料的情况下,Rb-Sr同位素参数基本上可以代替Sm-Nd同位素参数。经对比,求花岗岩中幔源物质百分比时,Rb-Sr法计算值与Sm-Nd法计算值相比,误差一般不超过10％。此外,作者还提出了计算花岗岩山幔源物质百分比的简化式,使该计算更为简便易行。