Main karstic springs of Israel

A series of karstic springs in Israel belongs either to the western (Mediterranean) or eastern (Rift Valley) watersheds. Most of them are presently managed or diverted. Salinities range from very fresh through brackish to very saline waters.     

Climate change impact on the hydrological budget of a large Mediterranean island

ABSTRACT

Crete is a Mediterranean, karst-dominated island, characterized by long drought periods. The Karst-SWAT model, combined with 11 climate change scenarios, was run to assess climate change impacts on the island under two set-ups, both using the auto-irrigation function of the model: (1) with water drawn from the shallow or deep aquifer, and (2) with irrigated water derived from an unlimited outside source. The first set-up provided insight into the fluctuation of future irrigation needs, and when compared to the second set-up, enabled quantification of the future water deficit. The Water Exploitation Index was used to describe the spatial variability of future water stress on Crete. A decrease in both surface and karstic spring flows is foreseen, especially after 2060 (24.2 and 16.5%, respectively). Simulated irrigation water demand and water deficit show continuous increase throughout the projection period (2020–2098).     

A component approach for the hysteretic behaviour of connections in cross‐laminated wooden structures

In this paper, a numerical model to estimate the dissipative capacity and describe the cyclic response of cross‐laminated (X‐lam) timber buildings is presented. The connections between panels and to the foundation (metal hold‐downs and angle brackets, and screwed connectors) are modelled with nonlinear hysteretic multispring elements taking into account the strength interaction between different degrees of freedom according to a predefined domain. The timber components (solid X‐lam floors and wall panels) are modelled using elastic shell elements. By calibration on experimental cyclic tests carried out on each degree of freedom, important features of timber connection behaviour such as post‐peak strength, pinching and stiffness degradation can all be considered. In addition, the effect of friction at the interface between panels and with foundation can be taken into account. These springs have been implemented as external subroutines in a widespread software package such as Abaqus. By comparison with the experimental results of cyclic tests carried out on single X‐lam walls, coupled X‐lam walls and a single‐storey X‐lam building, the accuracy of the proposed model is demonstrated. Copyright © 2013 John Wiley & Sons, Ltd.     

Stable isotope‐based mean catchment altitudes of springs in the Lebanon Mountains

Stable isotopes of water are known to provide information on mean altitudes of spring recharge areas, which is an important parameter for groundwater resources management especially in karstic environments. Very often, a lack of precipitation input data limits the possibility for an appropriate estimation of mean catchment altitudes. In the Jeita spring catchment, Lebanon, a characterization of precipitation input was possible with samples collected at six stations at varying altitudes (88 amount‐weighted monthly samples). A local meteoric water line for the Jeita spring catchment was characterized as δ²H = 6.04 * δ¹⁸O + 8.45 (R ² = .92) for a 2‐year observation period between October 2012 and September 2014. Integral samples from the snow layer were collected at 22 sites at altitudes ranging from 1,000 to 2,300 m above sea level at the end of February 2012 and February 2013, when snow height reached a maximum of more than 6 m at the highest peak in the catchment. Water samples were continuously collected from six springs (Jeita, Kashkoush, Labbane, Assal, Afqa, and Rouaiss). Jeita spring water samples were collected additionally in daily time steps during the snowmelt season in 2012. Mean isotope values of the sampled springs range from ?6.8‰ to ?8.2‰, and from ?33‰ to ?44‰, for δ¹⁸O and δ²H, respectively. The stable isotope data show that input variability (space and time, snow cover, and rainfall) has direct impacts on mean altitude estimates of spring catchments. A more profound interpretation of spring response to rainfall for six local springs in the Lebanon Mountains was possible in comparison to four earlier described springs collected in the Anti‐Lebanon Mountains in Syria.     

Isolation of anaerobic,extremely thermophilic,sulphur metabolising archaebacteria from New Zealand hot springs

Enrichments of New Zealand geo‐thermal samples, initiated in anaerobic sulphur‐containing media and incubated at temperatures above 85°C, yielded rod and coccal shaped organisms which possessed archaebacterial characteristics. Pure cultures were isolated and characterised. Five of the seven isolates, which were rod‐shaped organisms and did not have an obligate requirement for sulphur respiration, were similar to Thermoproteus sp. but had more neutral pH optima for growth. Three of these five Thermoproteus sp. were obligate heterotrophs, which has not previously been reported. The two coccal isolates had an obligate requirement for sulphur as an electron acceptor and were similar to Desulfurococcus sp. but again with more neutral pH optima for growth.     

Geophysical exploration of the Puhipuhi epithermal area, Northland, New Zealand

The Puhipuhi epithermal area, which occurs in a region of graywacke basement partially covered by basalt and lake-bed deposits, is characterized by both large-scale and small-scale geophysical anomalies. Known occurrences of locally intense alteration or silicification are typically associated with strong gravity, resistivity or IP anomalies. Gravity data define a complex negative residual anomaly (up to −50 gu) which has been used to identify and delineate a large area (about 20 km²) of low-density, presumably clay-altered, graywacke basement rocks. This zone, modeled as extending to a few kilometers depth, encompasses, but is more extensive than, the known areas of alteration and has a close spatial association with the basalt cover rocks. Short-wavelength gravity minima and maxima, which indicate that the most intense alteration of the basement rocks occurs below the basalt, correlate, in part, with the inferred location of hydrothermal upflow zones. The control on the location of these zones and their relationship to the location of the basalts is not well known; however, if the basalts acted as a cap rock to the geothermal system, then these areas merit further exploration. High (≥100 ohm-m) and low (≤10 ohm-m) resistivity and high (≥30 mS) IP anomalies occur in association with known silicification, clay alteration and sulfide mineralisation, respectively. In addition, magnetic data help constrain the relative timing of hydrothermal alteration and basaltic volcanism and indicate that mineralisation was broadly synchronous with volcanism.     

Vertical concentration gradients of heavy metals in cultured mussels

Cultured mussels, Perna canaliculus (Gmelin), from two widely separated locations in New Zealand have been analysed for variation in heavy metal content with depth. The mussels, which are grown on vertically suspended ropes to a depth of 9 m, have been analysed for cadmium, lead, iron, and zinc at 1‐m intervals. At the first location (Kenepuru Sound), cadmium, lead, and iron increased with depth, while zinc decreased with depth. At the second location (Waiheke Island), concentrations of the four metals all remained essentially constant with depth. The differences in vertical concentration gradients between these two locations must result from differences in mixing of the water column. The differences in mixing may cause variations in the type of food organisms with depth, or variations in the ratio of particulate v. dissolved metal levels with depth. Either or both of these conditions could result in differences in the bioavailability of these metals with depth.     

五大连池药泉山矿泉微生物多样性及其地质和环境控制特征

药泉山矿泉是五大连池世界地质公园旅游疗养业赖以生存和发展的重要资源,然而其矿泉水的微生物研究一直是空白。本文在对五大连池药泉山矿泉环境水文地质前期成果的基础上,选择典型季节对该区域的矿泉水进行现场采样和分析,并进一步利用分子生物学PCR-DGGE技术对水样的微生物群落多样性进行了初步的研究与分析。结果表明：研究区的微生物多样性显著,而且不同季节微生物多样性统计参数存在巨大差异;在不同的空间位置夏季微生物多样性变化较大,但是同一位置的总体变化规律基本一致,这说明矿泉水中的微生物对地质特征、环境条件的响应具有良好的一致性;而冬季的微生物多样性统计参数在不同空间位置的变化规律也呈现明显差异,但是其他参数变化不大,对地质空间、环境条件响应微弱。该研究对揭示五大连池矿泉水微观成因具有一定的价值。     

Lisdoonvarna springs and spa wells,County Clare,Ireland

Lisdoonvarna is a small town with a resident population of ca. 700, which is seasonally increased several-fold by tourists. It is located in the northwest of County Clare, western Ireland about 10 km from the Atlantic seaboard and adjacent to the karstic Burren plateau. Lisdoonvarna has two claims to fame: it is the only currently operative spa in Ireland, and it is the center for a long-established match-making festival held each September (postharvest) at which bachelor farmers are found partners by skilled match-makers. These two features of Lisdoonvarna are not wholly unconnected even though the September festival now attracts many young people from outside of the area who may not patronize the spa waters.     

Prioritizing conservation potential of arid-land montane natural springs and associated riparian areas

Using inventory data and input from natural resource professionals, we developed a classification system that categorizes conservation potential for montane natural springs. This system contains 18 classes based on the presence of a riparian patch, wetland species, surface water, and evidence of human activity. We measured physical and biological components of 276 montane springs in the Oscura Mountains above 1450 m and the San Andres Mountains above 1300 m in southern New Mexico. Two of the 18 classes were not represented during the inventory, indicating the system applies to conditions beyond the montane springs in our study area. The class type observed most often (73 springs) had a riparian patch, perennial surface water, and human evidence. We assessed our system in relation to 13 other wetland and riparian classification systems regarding approach, area of applicability, intended users, validation, ease of use, and examination of system response. Our classification can be used to rapidly assess priority of conservation potential for isolated riparian sites, especially springs, in arid landscapes. We recommend (1) including this classification in conservation planning, (2) removing deleterious structures from high-priority sites, and (3) assessing efficiency and use of this classification scheme elsewhere.