腾格里沙漠人工固沙植被区生物土壤结皮对降水的拦截作用

在沙坡头人工植被区对人工模拟降水及天然降水后生物土壤结皮层含水率进行了动态定位监测,并分析了生物土壤结皮拦截降水的作用.结果表明:①生物土壤结皮的发育改变了原来沙丘剖面的水分分配格局,10%～40%的年降水量被拦截到结皮层;②随固沙年限的增加,生物土壤结皮的进一步发育和演变,其对降水的拦截能力也进一步提高;③生物土壤结皮对降水的拦截有明显的季节变化,7～10月份平均拦截雨量比4～6月份平均高出12%.     

云南省金沙江流域土壤流失方程研究

云南金沙江流域是长江中上游水土流失最严重的区域。本项研究以“通用土壤流失方程”(USLE)为蓝本,运用小区实验等手段,综合分析了各个侵蚀因子,建立了云南金沙江流域土壤流失方程A=R·K·LS·c·P,并确定了方程中诸因子的求算方法和数值,以及该流域土壤允许流失量,为方程的应用提供了基本的技术数据。同时,还进行了方程的检验,方程计算值与小区实测值的相对误差在6.3％以下,表明该方程在实际应用中是可靠的。该方程的建立,可为云南金沙江流域预测预报土壤侵蚀,制定土地合理利用规划方案、水土保持措施和土地生态安全格局提供了一套可靠的科学方法和依据。     

太平庄井地下流体动态主要干扰因素研究

通过分析多年的观测资料，认为太平庄井地下流体动态的主要干扰因素为区域地下热水开采，其次为降雨。气压的明显变化对水位、水温也有一定干扰。区域开采造成太平庄井水位、水温同步下降，氢气测值升高；降雨导致太平庄井水位上升、水温下降。     

Calibration of an oscillating nozzle‐type rainfall simulator

Nozzle‐type rainfall simulators are commonly used in hydrologic and soil erosion research. Simulated rainfall intensity, originating from the nozzle, increases as the distance between the point of measurement and the source is decreased. Hence, rainfall measured using rain gauges would systematically overestimate the rainfall received at the ground level. A simple model was developed to adjust rainfall measured anywhere under the simulator to plot‐wide average rainfall at the ground level. Nozzle height, plot width, gauge diameter and height, and gauge location are required to compute this adjustment factor. Results from 15 runs at different rain intensities and durations, and with different rain gauge layouts, showed that a simple average of measured rain would overestimate the plot‐wide rain by about 20 per cent. Using the adjustment factor to convert measured rainfall for individual gauges before averaging improved the estimate of plot‐wide rainfall considerably. For the 15 runs considered, overall discrepancy between actual and measured rain is reduced to less than 1 per cent with a standard error of 0·97 mm. This model can be easily tested in the ?eld by comparing rainfall depths of different sized gauges. With the adjustment factor they should all give very similar values. Copyright © 2003 John Wiley & Sons, Ltd.     

Water and sediment outbursts from advanced Franz Josef Glacier,New Zealand

The Franz Josef Glacier, Westland, New Zealand, has a history of catastrophic sediment‐laden outburst ?oods associated with extreme rainfall events when the glacier toe is advanced over its own sediments. Consideration of these events and inspection of recent sediment deposits suggest that there are three distinct modes of outburst. The ?rst is associated with fans fed by over?ow along the glacier margin. As the glacier has advanced across its own fore?eld gravels, it is inferred that the primary drainage conduit has developed a reach of negative slope. In high ?ows massive boulders can block the conduit, trapping lesser clasts. The resulting backup of water causes over?ows through marginal moulins, producing the fan type of deposit. The second type of outburst deposits massive imbricated boulders at a greater or lesser distance from the glacier portal. In this case, pressure buildup drives the blockage out of the portal where the boulders deposit. Smaller materials are generally carried away. The third type consists of very shallow ?ows, and produces massive gravel deposits of uncertain provenance. In this condition, the excess pressure in the conduit results in slight uplift of the glacier and widespread discharge of water and sediment below the glacier snout; gravels and smaller sediments are laid down in a massive deposit across the fore?eld. The massive, boulder‐veneered deposit from the December 1995 outburst is interpreted in the light of the above mechanisms as a hyperconcentrated ?ow deposit from hydraulic jacking, overlain by boulders emplaced by a subsequent conduit outburst. A possible association of outbursts with the present advanced position of the glacier is suggested. Copyright © 2003 John Wiley & Sons, Ltd.     

Strain partitioning and preservation of Ar/Ar ages during Variscan exhumation of a subducted crust (Malpica–Tui complex, NW Spain)

The Malpica–Tui complex (NW Iberian Massif) consists of a Lower Continental Unit of variably deformed and recrystallized granitoids, metasediments and sparse metabasites, overridden by an upper unit with rocks of oceanic affinities. Metamorphic minerals dated by the ⁴⁰Ar/³⁹Ar method record a coherent temporal history of progressive deformation during Variscan metamorphism and exhumation. The earliest stages of deformation (D1) under high-pressure conditions are recorded in phengitic white micas from eclogite-facies rocks at 365–370 Ma. Following this eclogite-facies peak-metamorphism, the continental slab became attached to the overriding plate at deep-crustal levels at ca. 340–350 Ma (D2). Exhumation was accompanied by pervasive deformation (D3) within the continental slab at ca. 330 Ma and major deformation (D4) in the underlying para-autochthon at 315–325 Ma. Final tectonothermal evolution included late folding, localized shearing and granitic intrusions at 280–310 Ma.

Dating of high-pressure rocks by the ⁴⁰Ar/³⁹Ar method yields ages that are synchronous with published Rb–Sr and Sm–Nd ages obtained for both the Malpica–Tui complex and its correlative, the Champtoceaux complex in the French Armorican Massif. The results indicate that phengitic white mica retains its radiogenic argon despite been subjected to relatively high temperatures (500–600 °C) for a period of 20–30 My corresponding to the time-span from the static, eclogite-facies M1 peak-metamorphism through D1-M2 eclogite-facies deformation to amphibolite-facies D2-M3. Our study provides additional evidence that under certain geological conditions (i.e., strain partitioning, fluid deficiency) argon isotope mobility is limited at high temperatures, and that ⁴⁰Ar/³⁹Ar geochronology can be a reliable method for dating high pressure metamorphism.     

Observed daily large-scale rainfall patterns during BOBMEX-1999

A daily rainfall dataset and the corresponding rainfall maps have been produced by objective analysis of rainfall data. The satellite estimate of rainfall and the raingauge values are merged to form the final analysis. Associated with epochs of monsoon these rainfall maps are able to show the rainfall activities over India and the Bay of Bengal region during the BOBMEX period. The intra-seasonal variations of rainfall during BOBMEX are also seen using these data. This dataset over the oceanic region compares well with other available popular datasets like GPCP and CMAP. Over land this dataset brings out the features of monsoon in more detail due to the availability of more local raingauge stations.     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.     

中尺度自忆模式在强降水预报中的应用

根据大气自忆性原理提出的回溯时间积分格式应用于中尺度格点模式MM5,构建了中尺度自忆模式SMM5并做了短期强降水预报的实验.结果表明,SMM5模式与MM5模式相比,由于使用了多个时刻的场资料,预报精度有了明显的提高, SMM5预报的最大雨区的中心位置与降水量也比MM5更接近实际观测场.     

黄河流域夏季分区面雨量预报研究

介绍黄河流域分区夏季面雨量预报的研究成果，精心挑选51个具有较好代表性的测站对黄河流域夏季降水的时空演变特征进行分析，使用K均值动态聚类对黄河流域的夏季降水进行了客观分区，并计算出各流域夏季面雨量。通过对黄河流域夏季雨量与500hPa环流，海温、OLR、中纬阻高，高原积雪，欧亚积雪等重要影响因子的关系分析，结合黄河流域夏季面雨量年降和年代际演变特征的分析，研究出黄河流域分区夏季面雨量预测的基本方法和模型，并通过客观化的数学方法建立黄河流域夏季面雨量预测系统，预测系统十年回报的结果显示出具有较的预测技巧。