广义残差地形模型及其在局部重力场逼近中的应用

研究了残差地形模型中的非调和性问题,比较了基于棱柱体和球冠体的积分模型,提出了基于球冠体积分的广义残差地形模型。以泊松小波径向基函数为构造基函数,结合广义残差地形模型,融合多源实测重力数据构建了局部区域重力场模型。研究结果表明:基于棱柱体积分的残差地形模型精度较低,在山区可能引入毫伽级以上的误差,建议采用更为接近真实地形表面的球冠体积分模型。相比于原始的残差地形模型,基于球冠体积分的广义残差地形模型能更为精确地逼近局部重力场模型中地形因素引起的高频效应。     

辐射井技术在尾矿库降排水工程中的应用

尾矿库是我国重大危险源之一,而尾矿库内的浸润线又是坝体安全的重要指标之一,为有效排出尾矿中的水,降低尾矿库内浸润线,本文通过辐射井技术在尾矿库降排水工程中应用的多个成功工程实例,归纳、总结并提出该技术在尾矿库应用过程中的设计思路、施工要点及工艺方法等。     

Experimental investigation of the effects of the coverage of helical strakes on the vortex-induced vibration response of a flexible riser

The effects of different helical strake coverage on the vortex-induced vibration (VIV) of a model flexible riser were studied experimentally, with the aim of further improving the understanding of VIV responses. Uniform and linearly sheared currents were simulated to study response parameters such as non-dimensional displacement, fatigue damage, suppression efficiency, and the comprehensive evaluation is further studied. Test results of the bare model for a uniform current showed that the behavior of both the standing wave and traveling wave dominated VIV displacement. However, for a linearly sheared current, traveling wave behavior dominated VIV displacement in the high-velocity range. The results of the straked model tests indicated that the response was strongly dependent upon the amount of coverage of helical strakes. The flexible riser with 75% strake coverage gave the best comprehensive evaluation in a uniform current, and 50% strake coverage gave the best comprehensive evaluation in a linearly sheared current.     

Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.     

深部地质钻探钻柱失效行为分析

国家的“三深一土”规划确定全面开展深地探测,而在深地探测中钻柱是最重要的连接纽带,其长期在充满钻井液的井眼内工作,受力十分复杂,且受腐蚀、磨损、温度等影响,极易发生钻柱失效事故,造成重大经济损失。研究发现,振动是引起钻柱失效的主要原因,但是深部地质钻探中除了振动引起钻柱失效外,还包括钻柱质量因素、人为因素、钻井质量、套管下入因素、测斜因素以及钻井液因素引起的钻柱失效,本文针对这些影响因素提出了对应的预防措施。同时随着地质钻探井深的不断加深,地质钻探钻柱动力学研究会变得越来越重要,这就需要地质钻探人员在充分考虑地质钻探钻柱失效影响因素的前提下,加大对地质钻探钻柱动力学的研究,以更好地保证深部地质钻探的顺利进行。     

2-D delineation of individual citrus trees from UAV-based dense photogrammetric surface models

One of the challenges of remote sensing and computer vision lies in the three-dimensional (3-D) reconstruction of individual trees by using automated methods through very high-resolution (VHR) data sets. However, a successful and complete 3-D reconstruction relies on precise delineation of the trees in two dimensions. In this paper, we present an original approach to detect and delineate citrus trees using unmanned aerial vehicles based on photogrammetric digital surface models (DSMs). The symmetry of the citrus trees in a DSM is handled by an orientation-based radial symmetry transform which is computed in a unique way. Next, we propose an efficient strategy to accurately build influence regions of each tree, and then we delineate individual citrus trees through active contours by taking into account the influence region of each canopy. We also present two efficient strategies to filter out erroneously detected canopy regions without having any height thresholds. Experiments are carried out on eight test DSMs composed of different types of citrus orchards with varying densities and canopy sizes. Extensive comparisons to the state-of-the-art approaches reveal that our proposed approach provides superior detection and delineation performances through supporting a nice balance between precision and recall measures.     

免共振沉桩过程对地表振动影响的FLAC3D数值模拟

为研究免共振沉桩过程对地表振动影响,采用密度放大法以消除模型桩弹性模量过大对计算效率的影响,在有限差分软件FLAC^3D中建立了相应的连续振动沉桩模型,并和文献中的现场测试结果进行了比较,分析了激振力幅值和振动频率这两个施工参数对地表振动响应的影响。结果表明：密度放大法可有效提高数值模拟的计算效率,模拟沉桩7.0倍桩径（4.9 m）所需计算时间约为12.0 h,数值结果较好地模拟了现场测试中免共振沉桩的地表振动影响;激振力幅值和振动频率均主要对近场（水平距离为5.0倍桩径范围内）的地表振动有明显影响;临界沉桩深度与地表振动影响峰值相对应,该深度随水平距离先增大后趋于稳定;激振力幅值对临界沉桩深度的改变不明显,振动频率对远场临界沉桩深度则有较明显影响。     

SMA复合摩擦阻尼器性能的试验研究

利用形状记忆合金(SMA)的超弹性效应及高阻尼性能,结合传统Pall摩擦型阻尼器的特点,提出了一种SMA复合摩擦阻尼器。在建立阻尼器力学分析模型的基础上,对SMA复合摩擦阻尼器的性能进行了试验研究,分析了位移幅值、加载频率等对阻尼器的等效刚度、单位循环耗能和等效阻尼比的影响,并与理论分析结果进行了对比。研究表明,SMA复合摩擦阻尼器在加卸载循环下会形成比较稳定的滞回曲线,表明这种阻尼器具有良好的耗能能力。     

三维隔震(振)支座的工程应用与现场测试

首先介绍了一种新型三维隔震(振)支座,该支座由联接件、竖向隔振支座和水平隔震支座组成。竖向隔振支座和水平隔震支座具有较小刚度,采用该类型支座的隔震结构,其竖向基频和水平基频可远离地铁、铁路振动和地震的主频,从而实现竖向隔振和水平隔震作用。其次介绍了该三维隔震(振)支座在某一地铁平台上部结构中的应用情况,对该类型支座进行了竖向性能和水平性能试验。最后对三维隔震(振)结构与传统结构进行了地铁运行时结构振动的对比测试。测试结果表明:三维隔震(振)系统对振动的高频信号具有显著衰减效果。     

混合被动控制优化设计及性能研究

本文将调谐液体阻尼器(TLD)和黏弹性阻尼器(VED)同时作用于结构,构成混合被动控制系统。通过对两类阻尼器分别进行优化设计并考虑两者间的相互影响,在充分发挥两者各自优良控制性能的同时,克服了VED大量使用导致控制系统整体造价过高的问题。算例分析表明,混合控制可以得到令人满意的整体减震效果,同时大大节约了VED用量,提高了控制系统的综合经济性能。