中巴地球资源一号卫星CCD图像质量评价和交叉定标研究

使用定量分析方法评价了中巴地球资源卫星CCD相机遥感数据质量 ,在此基础上利用LANDSAT 7ETM 对CCD的对应波段进行交叉定标计算 ,得到了一组CCD的参考定标系数。在遥感数据质量评价研究中 ,使用统计分析方法计算得到了CCD相机图像数据的条纹强度 ;应用结构函数方法计算获得了CCD的噪声数据 ;通过功率谱计算 ,对比分析了CCD和LANDSAT 7ETM 对应波段图像空间纹理特征。该文通过交叉定标计算 ,得到了CCD相机前 4个波段的参考定标系数、动态范围和噪声等效反射率等参考指标 ,并对这组定标系数进行了验证 ,从验证结果中发现CCD1,2 ,3和LANDSAT 7ETM 对应波段反射率最大相差 1 98% ,最小0 0 3% ,平均差要低于 1 31% ,而波段 4最大也仅相差 4 4 1% ,平均差 3 0 2 % ,证明计算得到的交叉定标系数具有较高的参考价值     

Knickpoint recession rate and catchment area: the case of uplifted rivers in Eastern Scotland

Knickpoint behaviour is a key to understanding both the landscape responses to a base‐level fall and the corresponding sediment fluxes from rejuvenated catchments, and must be accommodated in numerical models of large‐scale landscape evolution. Knickpoint recession in streams draining to glacio‐isostatically uplifted shorelines in eastern Scotland is used to assess whether knickpoint recession is a function of discharge (here represented by its surrogate, catchment area). Knickpoints are identified using DS plots (log slope versus log downstream distance). A statistically significant power relationship is found between distance of headward recession and catchment area. Such knickpoint recession data may be used to determine the values of m and n in the stream power law, E = KA^mSⁿ. The data have too many uncertainties, however, to judge definitively whether they are consistent with m = n = 1 (bedrock erosion is proportional to stream power and KPs should be maintained and propagate headwards) or m = 0·3, n = 0·7 (bedrock incision is proportional to shear stress and KPs do not propagate but degrade in place by rotation or replacement). Nonetheless, the E Scotland m and n values point to the dominance of catchment area (discharge) in determining knickpoint retreat rates and are therefore more consistent with the stream power law formulation in which bedrock erosion is proportional to stream power. Copyright © 2005 John Wiley & Sons, Ltd.     

Wood storage in a wide mountain river: case study of the Czarny Dunajec,Polish Carpathians

Storage of large woody debris in the wide, mountain, Czarny Dunajec River, southern Poland, was investigated following two floods of June and July 2001 with a seven‐year frequency. Within a reach, to which wood was delivered only by bank erosion and transport from upstream, wood quantities were estimated for eighty‐nine, 100 m long, channel segments grouped into nine sections of similar morphology. Results from regression analysis indicated the quantity of stored wood to be directly related to the length of eroded, wooded banks and river width, and inversely related to unit stream power at the flood peak. The largest quantities of wood (up to 33 t ha^?1) were stored in wide, multi‐thread river sections. Here, the relatively low transporting ability of the river facilitated deposition of transported wood while a considerable length of eroded channel and island banks resulted in a large number of trees delivered from the local riparian forest. In these sections, a few morphological and ecological situations led to the accumulation of especially large quantities of wood within a small river area. Very low amounts of wood were stored in narrow, single‐thread sections of regulated or bedrock channel. High stream power facilitated transport of wood through these sections while the high strength of the banks and low channel sinuosity prevented bank retreat and delivery of trees to the channel. Considerable differences in the character of deposited wood existed between wide, multi‐thread channel sections located at different distances below a narrow, 7 km long, channellized reach of the river. Wood deposited close to the downstream end of the channellized reach was highly disintegrated and structured into jams, whereas further downstream well preserved shrubs and trees prevailed. This apparently reflects differences in the distance of wood transport and shows that in a mountain river wider than the height of trees growing on its banks, wood can be transported long distances along relatively narrow, single‐thread reaches but is preferentially deposited in wide, multi‐thread reaches. Copyright © 2005 John Wiley & Sons, Ltd.     

AutoCAD技术在道路工程施工测量中的应用

在道路建设中,通常分为几个标段同时施工,每个标段里一般包括路基及各种构造物,因此,施工测量任务十分繁重,由于全站仪在工程测量中的普遍应用,其极坐标放样功能使测量工作中出现错误主要为坐标计算错误,特别是具有记忆功能的全站仪,可以事先输入坐标,复核后再到现场放样。所以测量的主要工作就是根据施工图纸计算其各个部位的坐标,而如何快速、准确地计算坐标是关键所在。应用AutoCAD技术进行坐标定位计算,则可以做到事半功倍,并能取得良好的施工效果。     

深直井旋转钻柱空转功率消耗的数学建模

通过对深井旋转钻柱空转功率消耗因素的分析，考虑空转时离心力作用在井壁上引起的摩擦力导致的功率消耗，并将钻井液视为牛顿液体，运用柱坐标系建立了旋转钻柱在深井作业条件下空转功率消耗的分析模型。综合考虑空转功率与钻柱旋转的角速度、钻柱与井眼结构参数、钻井液粘度系数等因素间的关系，即旋转钻柱运动过程中的离心力和钻井液作用在钻柱上的剪切应力对功率的影响，建立了更加符合实际工况的数学模型。     

浅析运营期间电力隧道自动化监测技术

针对城市电力隧道结构、走向多变、电缆设施多、电磁干扰大等因素,常规的监测方法难以顺利完成的现状,对目前先进的3种隧道结构自动化监测系统进行深入的研究比较,光纤传感自动技术解决了电力隧道结构监测点布设困难,数据受电磁干扰大的问题,能实时有效、可靠、高精度地监控电力隧道,及时掌握隧道的应力、应变及振动等主要结构参数,确保隧道结构安全。研究对类似的城市电力隧道自动化监测具有一定的参考意义。     

地壳运动驱动力的探讨——核能与地球演化

本文综合核物理、天文和地质学的最新研究成果,推导出在45亿年前太阳系的全部原始类地行星及其某些卫星(包括地球及月球)上,发生过大规模的、持续的铀、钚链式核裂变,释出了巨大的热能,熔化了整个原始星球。新星球的物质发生了重力分异作用、形成了按密度划分的圈层结构。地球中心是内地核,在高压下压成了固态。铀、钚下沉到内地核顶部停留,继续发生链式核裂变,但改变不了内地核的固态性质。从此处产生的核裂变能,主要以热对流的形式外导。直到前45亿年以后,铀的链式核裂变停止了,只剩下钚的链式核裂变,生成的热能减少了,地球开始冷凝。当熔浆表面温度下降到700~800℃时,较轻的花岗岩质岩浆首先凝固成薄层。它很脆弱、经不起大风浪和潮汐力的冲击,破碎成小块,随着下面对流的玄武岩质熔浆汇集起来,形成大片飘浮物,后来就成为大陸;小片的便成为岛屿。温度逐渐下降,地幔冷凝成固体。温度下降至100℃以下,大气中的水蒸气冷凝成水,下落汇集在地表低凹处,便有了海洋和湖泊。所以海洋底主要分布着玄武岩。从内地核顶部不断产生的核能以"地幔柱"的形式穿过固体地幔,上升至地壳。受坚硬地壳的隔挡、便集中在地壳下构成软流层。当地壳岩石受热软化和可以流动之后,便开始向压力小的方向流动。又受日、月引力和地球自身自转力的作用,软流层的动能又有了增强。这种巨大的能量支配了地壳的升降、褶曲、断裂、变质、岩浆、火山和地震等活动。地球是天体之一,无时不受自然界各种作用力的影响,但支配它演化的主要作用力是核能。本文还简述了核能、核素与太阳系星体演化的关系。     

利用GNSS干涉信号振荡幅度反演土壤湿度

根据干涉效应和GNSS接收机信噪比估计方法,推导了利用GNSS干涉信号幅度进行土壤湿度反演的模型,建模过程考虑了天线增益、土壤介电常数和噪声的影响。提出了使用AMPD算法从含有噪声的归一化干涉功率曲线中提取干涉峰值与谷值,进而反演了土壤介电常数与土壤湿度的方法,并对其进行了仿真。结果表明,利用提取出来的干涉谷值进行反演性能比峰值好,相对稳定准确的卫星仰角范围为5°~25°,湿度大于0.06cm~3/cm~3时反演结果更为准确,标准差在0.01cm~3/cm~3左右波动。