基于二阶局部纹理熵的边缘检测方法

针对传统的边缘检测方法将灰度变化较为平缓的区域误判为边缘的问题,提出了基于二阶局部纹理熵的边缘检测方法。利用了二阶局部纹理熵能表示局部区域灰度变化大小的性质,并采用灰度错位压缩法消除灰度值压缩造成的条纹现象。实验表明,本文提出的方法能有效地检测出各类边缘,解决了上述的误判问题;通过不同大小窗口的边缘检测效果比较,建议在采用基于二阶局部纹理熵的边缘检测方法时将窗口设置为3×3。     

1.2m望远镜激光测距系统同步旋转快门的设计与实现

介绍了一种对2台步进电机相互间采取等差角同步旋转的控制方案.根据这个方案设计和制作的机电控制电路实现了同步旋转快门功能,最终的同步精度控制在步进电机的性能1.8度/步的范围内,应用在激光测距系统中起到了安全保护单光子探测器的作用.     

滑坡位移动态实时跟踪预测

在滑坡动态观测数据时序系统建模理论方法基础上 ,采用限定记忆最小二乘递推法 ,提出滑坡位移动态跟踪预测问题 ,介绍了该方法的基本原理及预测步骤 ,通过实例的综合研究进一步证明了该动态跟踪预测方法的可行性 ,并达到一定的预测精度 ,可以对一定条件下的滑坡变形位移作出超前动态预测     

Numerical modeling of the propagation and morphological changes of turbidity currents using a cost-saving strategy of solution updating

Existing layer-averaged numerical models for turbidity currents have mostly adopted the global minimum time step (GMiTS) for solution updating, which confines their computational efficiency and limits their attractiveness for field applications. This paper presents a highly efficient layer-averaged numerical model for turbidity currents by implementing the combined approach of the local graded-time-step (LGTS) and the global maximum-time-step (GMaTS). The governing equations are solved for unstructured triangular meshes by the shock-capturing finite volume method along with a set of well-balanced evaluations of the numerical flux and geometrical slope source terms. The quantitative accuracy of the model, given reasonably estimated empirical and model parameters (e.g., bed friction, water entrainment, sediment deposition and erosion coefficients), is demonstrated by comparing the numerical solutions against laboratory data of the current front positions and deposition profiles, as well as field data of the current front positions. The improved computational efficiency is demonstrated by comparing the computational cost of the present model against that of a traditional model that uses a GMiTS. For the present simulated cases, the maximum reduction of the computational cost is approximately 80% (e.g., a simulation that cost 1 h before will only require 12 min with the new model).     

Longitudinal velocity patterns and bed morphology interaction in a rill

Present‐day understanding of rill dynamics is hampered by a lack of detailed data on velocity distributions in rills. The latter are dif?cult to collect with traditional techniques due to the very low water depths and the relatively high ?ow velocities in rills. The objectives of this paper were to investigate the feasibility of miniaturized acoustic Doppler velocimeter (mADV) measurements in rill ?ow and to explore longitudinal variations in ?ow velocities and their relationship with rill bed morphology. Detailed data on longitudinal ?ow velocity were required to achieve these objectives. A 1·8 m long rill was formed freely in a ?ume at 5° slope and 0·001 m³ s^?1 discharge. Rill topography was characterized by an alternation of steps and pools. The ?ume surface was then ?xed to preserve rill roughness. A topographical scanning of the entire ?ume surface was made. Velocity was measured with a mADV along the rill, and at different depths. Flow depth in a longitudinal direction was also measured using an elevation gauge. A strong relationship exists between rill topography and ?ow hydraulics. Over steps, ?ow was unidirectional and rapidly accelerating until a threshold Froude number (Fn) value between 1·3 and 1·7 was reached and a hydraulic jump occurred leading to the formation of a pool. In the pool, the ?ow pattern was multidirectional and complex. The ?ow was subcritical when leaving the pool and accelerated over the next step until the threshold Froude number value was again reached. Energy loss in the rill was concentrated in the pools, mainly due to the action of a hydraulic jump. This mechanism of energy dissipation appeared to be an essential factor in rill formation and bedform evolution. Copyright © 2004 John Wiley & Sons, Ltd.     

昌平地震台体应变资料分析

简要介绍了昌平地震台概况,用相关分析、信息合成等方法,对体应变仪1989年7月至2001年的资料进行了处理,发现对发生在距昌平地震台300～500km范围内、震级5级以上的地震,体应变资料趋势异常明显,异常时间与震级相关性较好,地震多发生在信息合成值变化较大的时段。昌平地震台体积式应变仪观测到的同震效应多以张性阶跃为主。     

天然饱水条件下黄铁矿氧化过程的热力学探讨

本文从化学热力学角度讨论了黄铁矿在低温低压条件下通过化学作用氧化的历程,指出了决定黄铁矿氧化速率的步骤是黄铁矿的溶解作用,并对一实际水样进行了化学反应的平衡分析     

北祁连逆掩断裂带的缓倾角断层

本文阐述了北祁连逆掩带中缓倾角断层的结构特征和地质意义。这些断层是本区走向北西西、断面南倾的区域逆冲断裂系的组成部分,断距大小不等,显示出一定规模的推覆构造型式。文中把本区和典型的逆掩推覆构造作了对比,并推断了这种缓倾角断层的演化模式。此项研究为进一步评价酒泉盆地以至河西走廊的含油远景提供了构造研究基础。     

Recent vertical movements across the Atalandi fault-zone (Central Greece)

Repeated leveling data collected over a 14-km long traverse, crossing the Atalandi fault that last broke in 1894, revealed small amplitude motions for the interval 1969–1984. These motions are significant against random errors and are probably free of systematic errors. In addition, no local or superficial ground effect may account for the observed elevation changes which correlate with the tectonic pattern in the area, as they show a relative downward motion of the hanging wall of a normal fault. This motion is similar to the co-seismic slip. Geomorphological observations and observations of submerged archaeological sites on the other hand corroborate long-term motions which are unlikely to be explained as cumulative co-seismic slip and are possibly similar to the short-term motions leveling data reveal.